EAT26

Just curious but in the whole list you have listed you have not said you have tried a new/another AFM? I use to have issues with my car stalling at idle before of the AFM, I changed the AFMS and problem went away. I also adjusted the Idle control to idle it a little higher than stock just to keep it good.

+1 My GTR had a issue where it would on occasion drop oil pressure 10-15psi and it was the sender, got the sender myself through nissan got Dan ^^^ to fit it and haven't had any more issues until my engine ate a piston.

I have had both a Organic NPC and a Bigmouth track NPC button. The organic is better for every day use, I was pushing 450hp when my GTR was my daily and not an issue what so ever until of course wear took place. I was doing 6500-7000rpm launches getting my 1/4mile time down to a 12.385 at 111mph when I decided the clutch had enough it was slipping at the top end of my gears mainly second and 3rd. I asked MANY MANY suggestions on which way to go after killing the organic. Dan(ERD), Noel(Fineline), Strik3r, Hyped6 and Strudel. A majority suggested the Bigmouth track, and I am glad I listened to them. The clutch is a little adsertive and obviously doesn't like being ridden like a button clutch shouldn't be, but in traffic somewhat difficult to avoid. but 1 of the best things I had in my GTR. Not as piggy as some of the button clutches I have driven and VERY liveable. My clutch is still holding out and I don't expect having to upgrade for a long long time, so It's my recomendation.

EFI Performance for sure. Currently tuning my GTR for the 3rd time with a fresh engine... already making the power I wanted Sean(Tuner) has a excellent manor and is always going to tune it the best he can.

All going to plan, I pick up the GTR this thursday... I have been given it's power figure but it's not 100% yet... Sean(Tuner) is not 100% happy with the full throttle so he is going to tweak it some more. I will be posting a dyno sheet, when I get it

You take the front drive shaft out to tune it. Many claim you loose 100+hp.... but lies lol. A quite well known GTR did back to back RWD to AWD to RWD dyno runs with only a loss of 15hp... with heat soak

I can't remember the sound hahahaha my car hasn't been here for 5 months whilst I was getting it built there were complications during the whole build hahah

Try living with a gravel drive way hahahaa

Nice car... I approve of the Colour, the Rims and the mods hahaha I'm the same with my MNP 33 gotta love Twins... I have thought about single and if you want the power it is the way to go unless you want alot of lag... or just put VCT in

I would dare say it's not your manifolds, standard manifolds have proven to flow quite well to a certain point to which I believe is over 400kw. What was your power figure before E85? and what are the exact mods? I am running -5s and was putting out 350rwkw at 21psi on BP98, before my rebuild and I have a restrictive exhaust... Tomei dumps, restrictive front pipe, 3" cat and 3" to 3 1/2" Kaki exhaust. Not to compare apples to oranges but Xr6Turbo engines their valve springs tend to start floating around the 13psi mark even when the car only has 10 thousand+ kms on it, its a known problem with the ford engines. Working on the same theory with Rb26s that are a minimum 10 years old you have to add fatigue to the scenario... This is why when I got my engine rebuilt, I got Supertech springs put in just for a little more peace of mind.

+1 for Dan at ERD. Tuning by Sean at EFI Performance. Dan built my engine and Sean tune my GTR.... Won't take it anywhere else!

Hahahaha I just picked up a series 1/2 standard lip in a unbelievably good condition... Picked it up at about $200 but still gotta get it into the country... so the Greddy lip will have to last until then lol.

Cheers bud, Yeah I love the Rpf1's I am looking at buying another set for the track.. 17x10s to fit a bit bigger tire. Yeah it's gonna be a pain to keep clean but I'm gonna wax it every now and then to keep it a little fresher. Yeah Dan at ERD is driving around in it atm, doing the first 1000kms to make sure everything is sweet. Once I get it back I'll have a video up within a couple weeks.

Yet another pic supplied by a mate of mine who visited ERD today.

Yeah Dryden do some good work, I am close mates with them. Batcho 1 of the Dryden Boys is currently building his E36 Couple with a LS1 Turbo... might end up being twin turbo with the way he goes but certainly they know what they are doing. Cory's Evo is well worth checking out aswell... 99GSR... the fuel system plate for it is awesome I want 1 for the GTR but can't do it atm... not going E85 yet so it'll have to wait... I am pretty much gonna use a wax on it to try keep it clean.... but keeping it clean isn't gonna be the issue cause honestly I only pop the hood to change the oil, I just wanted it to be cleaned up a bit.

VCT isn't in yet, It will be in within a couple months tho after I pay for my plane ticket(Going overseas for a month)

Car is on the dyno...

Some new pics....... New lip!!! The car is in need.... Gonna detail it when it returns to my hands. Engine bay pic.... We have had some minor issues with the car but it is planned to go on the dyno sometime today or very soon....

Nice ECU Great unit, I run 1 in my GTR aswell.... there are a few of us up here in QLD running them

MMMMMMMmmmmmm Hit up Macca he's the master Mechanic outta you 2 <3

It's only just had it's first start up today... however I bought a GoPro yesterday... by... "accident" and yes it will get a sound clip soon

So here is a teaser..... She is running now!

Well it was a standard engine not the stroker as it was in the import papers. It DOES have cams unlike what I was told by a "big" shop... unknown duration tho, It's certainly equal to poncam's tho. The piston had "gas" porting tho so that was different.

Yeah to me this car is priceless.

I got it made by Aaron Dryden, You can also order design's through Dryden Motorsports. Aaron does drafting for Dryden Motorsports now, he had to do mine because it was more involved design wise then they usually are. Just good Dryden Motorsports and they'll come up. On another note. So, not much to do with the GTR has come about yet... I think they are doing run in now hahaha so on my weekend I have set a couple goals. Number 1 goal was to repair the bike I crashed a couple months back(just need to connect lines now) Number 2 goal was to clean my carport(In progress, I'm on break ) Number 3 goal was to get my 1972 Toyota Corona running and washed... Goal completed. The main reason I wanted to get this car out and washed. The car belonged to my Late Pop, He was given it by my Great Aunt when they had to go into a nursing home. When I killed the ECU in the car my Pop told me I can have the car if I looked after it, about a week later he passed. The car holds ALOT of sentimental value to me obviously. I have also just bought his motorbike off my Grandmother, she was going to sell it after I repaired it however I decided I would like to own it so I bought it.