Lettogtst

Hey I have a issue with my car when its running, I has trouble keeping idle when you first start it then it. Then it all of the sudden start's reving to 3-4000rpm by it self with no one in the driver's seat. then it drops back down to Idle then it rev's again, and it will keep doing it. I have a Video if it helps anyone. Anyways let me know what you think Neo Video The Video is on Facebook so you may need an account to view it. Any input would be great.

Hey I finally just got my Rb25 Neo running in my R32 Gtst, When I start the engine it can barely keep it idle then all of the sudden it rev's past 4000rpm on it own and dosent drop off idle it just keeps going. Has anyone ever had this problem. I have ripped the throttle body of to give it a good cleaning an to check the TPS, also the MAF as well. Any help would be great Thanks!

Yea, mine just dosent want to start, Im getting some splitfire coilpacks at the end of the month, hope it fix's it!

Yea it wasn't the Ign wire, I think I might have some coilpack issue's. Time to buy some new one

Ok thanks, ill give that a try

Hey i just got a consult cable for my R32 skyline, I swapped a Rb25 neo in it. Now im getting a code 21: Ignition Signal Circut, And now it dosent start. Any thought on how to fix?

Hey guys im in a bind at the momment, I Swapped a R34 RB25 Neo into my R32 Gtst and i had a issue were my fuel pump relay shorted out and fried my ecu somehow but anyways. I got my fuel pump relay working again an my fuel pump is working now the problem is that im only getting 0.3V to my injectors and off the ECU im getting the full 13-14V. dose anyone know what the full voltage is the the injectors need to have to function right? I would asume that it would be 14V because thats what the ecu is putting out! Anyways I will await someones reply. thanks!

Sorry Mods Computer glitched out and posted 2

Hey everyone, Im currently swapping a ER34 RB25 Neo into my R32 GTST I have some questions about the wiring harness that I have, I have most of the dash plugs figured out, But I have some cut wires on the engine bay side of the loom they also connect up to some of the R34 Neo Dash plugs In the pictures as followed. Also there is a Brown and yellow wire, I dont know were they go. The wires that come from both the dash plug to the group of cut wires if someone could help fill in the blanks. Green/Red Stripe ->____________ Brown/White Stripe ->__________ Green/Orange Stirpe ->_________ Green/Yellow Stripe ->__________ Yellow ->__________ Yellow/Black Stripe ->__________ White ->___________ Red/Yellow Stripe ->_________ Blue/Yellow Stripe ->__________ Light Green ->__________ Red/Blue Stripe ->__________ Purple ->_________ Thanks any input on doing this swap would be great thanks

Hey everyone, Im currently swapping a ER34 RB25 Neo into my R32 GTST I have some questions about the wiring harness that I have, I have most of the dash plugs figured out, But I have some cut wires on the engine bay side of the loom they also connect up to some of the R34 Neo Dash plugs In the pictures as followed. Also there is a Brown and yellow wire, I dont know were they go. The wires that come from both the dash plug to the group of cut wires if someone could help fill in the blanks. Green/Red Stripe ->____________ Brown/White Stripe ->__________ Green/Orange Stirpe ->_________ Green/Yellow Stripe ->__________ Yellow ->__________ Yellow/Black Stripe ->__________ White ->___________ Red/Yellow Stripe ->_________ Blue/Yellow Stripe ->__________ Light Green ->__________ Red/Blue Stripe ->__________ Purple ->_________ Thanks any input on doing this swap would be great thanks