nuffsaid

Hi all Great condition indicators, both front and side ones. Front - $40 Side - $20 Both of them together - $50 Postage extra

Hi all I have a R34 GTT pull type clutch available Took off car at 40,000kms when imported and I put in an Exedy heavy duty, this was 2.5 years ago so clutch has just been sitting there. Still plenty of meat, great condition. It pretty much performs the same as an Exedy HD under 220kw's, but without the heavy pedal haha Located in Sydney

Any other info on Lovells?

bump

BUmp

Sold to Silver GT

Bump

its on the outer face, near the wheel nut holes

Had to test a mate's sensor Then never got around to putting it back, his worked fine but he bought another one anyways

someone must need an O2 sensor!

Updates below The $10 ones 2 x white Mines (about 23x10cm) 2 x black Mines (about 23x10cm) 1 x white Greddy logo with dial around the G (15x7.5cm) 1 x chrome Greddy logo with dial around the G (15x7.5cm) 1 x Nismo logo (with red circle) (30x4cm) 1 x glossy grey TEIN logo that says 'technical innovation' with dampachi doll (18x5cm) 4 x GTR emblems with chrome GT and chrome outline (8x6cm) 1 x black running writing Nismo (13x4.5cm) 2 x chrome running writing Nismo (13x4.5cm) 1 x black HKS logo (12x5cm) The $5 ones 1 x white Greddy logo with dial around the G (9x5cm) 1 x chrome Greddy logo with dial around the G (9x5cm) 1 x white standard Nismo logo (13x2cm) 1 x chrome standard Nismo logo, chrome O as well (8.5x1.5cm) 1 x chrome Trust logo (9x1.5cm) 1 x white Trust logo (9x1.5cm) 1 x chrome Trust logo (15x2cm) 1 x black Trust logo (15x2cm) 2 x Nismo logo with red circle (5x1cm) 1 x white Mine’s (9x4.5cm)

bump

bump

Pretty sure laser aligners dont use guard in measuring height. They have lasers that shoot underneath the car from left to right to calculate alignment specs. I run my fronts at 36psi so maybe try that Corner balancing the car might be hard, especially with suspension that you cant adjust mm by mm. Circlip grooves might be enough, not sure. How was the car in similar driving conditions with the rims+tyres but stock suspension?

not quite sure about rb20's sorry

Hi all Have an almost brand spanking new NGK/NTK O2 sensor for a R33 GTST or R34 GTT, I only used it for about 500km. These things are supposed to be replaced every 40,000km to improve idle, fuel economy, general performance. It is the Ford EL Falcon type and comes with the Ford harness/plug so there is no need to worry about the stainless wireless not being able to be soldered. All you need to do is connect these wires to the cars harness wires (that part will solder fine). The Ford EL Falcon sensor is known to work fine in our cars (unfortunately doesnt work for GTRs since they use a different element) Comes with the original NGK/NTK and leaflet. Took me a while to get the Ford plug for the harness side and thankfully I did otherwise I would have had to crimp the connections which wouldnt have been too good for a sensitive device. Link to thread about O2 sensors: http://www.skylinesaustralia.com/forums/O2...sor-t43095.html After installing I noticed it being slightly easier to rev the car out, but above all, it definitely smoothed my lumpy misfire-like idle. $50 including the Ford sensor Located in Sydney, can post easily. Thanks

I have heard of some cases about the front's not having much travel, even at the normal circlip height. Does anyone else have the same problem? Is it just a limitation of the Skyline front suspension, or has it got to do with the Bilsteins?

another blue sold cmon dudes a couple more left in red green and blue these should also fit in your boot

Alright someone take these for $5 Just pay for postage and give me a fiver =)

Hi all Got some stickers that I had made in recent trips overseas. Dont quite know why I had them all made up, most have gone on the toolbox/laptop etc haha You can stick them on your CAI box, bonnet, boot, bumper, engine, radiator, anything! Note: this is not a trader sale! Here they are: The $10 ones 2 x white Mines (about 23x10cm) 2 x black Mines (about 23x10cm) 1 x white Greddy logo with dial around the G (15x7.5cm) 1 x chrome Greddy logo with dial around the G (15x7.5cm) 1 x Nismo logo (with red circle) (30x4cm) 1 x glossy grey TEIN logo that says 'technical innovation' with dampachi doll (18x5cm) 4 x GTR emblems with chrome GT and chrome outline (8x6cm) 1 x black running writing Nismo (13x4.5cm) 2 x chrome running writing Nismo (13x4.5cm) 1 x black HKS logo (12x5cm) The $5 ones 1 x white Greddy logo with dial around the G (9x5cm) 1 x chrome Greddy logo with dial around the G (9x5cm) 1 x white standard Nismo logo (13x2cm) 1 x chrome standard Nismo logo, chrome O as well (8.5x1.5cm) 1 x chrome Trust logo (9x1.5cm) 1 x white Trust logo (9x1.5cm) 1 x chrome Trust logo (15x2cm) 1 x black Trust logo (15x2cm) 2 x Nismo logo with red circle (5x1cm) 1 x white Mine’s (9x4.5cm) I have sold some of the others and hence they arent listed above even though they are in the pictures. Note: the Mine's one with the black background is not for sale, the picture of the bottom one and ones like it are. They have masking tape on the top of them, so all you need to do is peel the masking tape off (sticker comes off with it), then stick it wherever you want on the car, then pull the masking tape off slowly and hey presto! In Sydney and can post easily. Can give a discount for bulk buys. Thanks

They dont protect water from running in when the windows are down a little? terrible But yea, feel your pain as well. I always thought the weathershields would help Still would be interested in a set of the R34 GTT

Any pics of your work denis?

go to nissan spares and grab a pair there the best there ever is, mine lasted 2 yaers before i needed to replace them new ones are top notch

sure are dude

cmon take these!