KICKIN

Item:32GTR Drive line bits Age: 14 years Condition: Used Price: $500 To Fit: Nissans (What car) Location:Melb Contact: [email protected] Hey all, I have a 32 GTR tailshaft, lsd diff and halfshafts for sale. Halfshafts include 4 stud hubs Want to sell as a whole Will post around aus. email only... [email protected] $500,

Item: APEXI DECS TACHOMETER Age: New Condition: NIB Never used Price:rrp$785 Sell $400 To Fit: nay car (What car) Location:Melb Contact: [email protected] I have a brand new never used Apexi DECS tachometer. Comes with Loom and shift light, sadly the stand is missing, when i bought the tacho the stand wasnt in the box. Sorry Here is a link to were you are able to buy the stand for $55 AUD http://www.importscene.com.au/category102_1.htm The new A'PEXi DECS Tachometer combines the classic RPM, warning, and memory playback functions of the previous EL Tachometer with the real time temperature and pressure display of an EL II Meter. This completely redesigned unit uses the same EL (Electro-Luminescence) technology as the original EL Tachometer. Looking to combine as many aspects of engine monitoring into one unit as possible, A'PEXi designed this new Tach to employ the new DECS (Dynamic Electronic Control System) technology. The DECS system integrates an optional pressure or temperature sensor to display real time values in a digital readout. Optional sensors that can be used in conjunction with the DECS Tach include: Water Temp, Oil Temp, Oil Pressure, and Fuel Pressure. Temperature values can be displayed in Fahrenheit or Centigrade. The DECS Tach also comes standard with a high intensity, dual stage shift light for accurate gear shifts. Main Features Include: - Large, 120mm analog display for easy to read shifting points. - Digital display built into the gauge face - Classic EL (Electro-Luminescence) lighting - Accurate RPM reading all the way to 11,000 RPM - Progressive number design for better high RPM viewing - Integrated TEMP, and Pressure reading* - High intensity shift light included * Temp, and Pressure reading available only with the use of an optional Temp or Pressure sensor. Sensors sold separately new they retail for $785 Need quick sale $400 Email only... [email protected] will post around aus.

No its not a gtr offset, you will need a couple of mm spacer on the fronts (not really sure how think) for a 33gtst

Hey again... Email only please [email protected]

Hey Johnny, i have a set of hubs that im wanting to offload. are you after fronts or rears? If you are able to email me because i dont really go on sau that much anymore thanks [email protected]

hey all... come on, no one wants these?

You can just turn up on the day, but first in best dressed...

bump

bump again sorry

bump

i dont know if the piston rings have been blown as i havnt stripped it. yes im willing to send anywere at buyers expence

Blown head gasket!

Hey all... Im here on Behalf of Nizpro to let everyone here know about there NATIONAL DYNO DAY Nizpro Turbocharging in association with Nizpro Dealers and Suppliers are holding this years first National Dyno Day. How this works: We will be holding 3 dyno days throughout the year. The first one being on Saturday June 16th. The dyno day will be held at Nizpro Turbocharging (Bayswater, vic) and also on the same day in NSW, WA, QLD & SA. If you will be attending the dyno day at Nizpro (Bayswater, Vic), please read the details below, and add your name to the list in this thread. If you will be attending the dyno day in your state, contact the appropriate Dealer/Supplier below. Date: Saturday June 16th Location: 6/46 Barry st Bayswater Victoria Price: $45 for 3 runs, Includes a Printout. Details: This dyno day is open to any vehicle make/model! There is no horsepower limit, and Blowers etc are all welcome to be used. There will be trophies awarded on the day. Classes: 4 Cylinder Naturally Aspirated 4 Cylinder Forced Induction 6 Cylinder Naturally Aspirated 6 Cylinder Forced Induction 8 Cylinder Naturally Aspirated 8 Cylinder Forced Induction There will be a BBQ and refreshments served on the day. We will also be showcasing some Nizpro kitted cars on the day. What do you need to provide? 1. Ensure you have at least 1/2 tank of fuel, there is nothing worse than running low on fuel on a full power run. 2. All vehicles must have exhaust systems complete from front to back. 3. If you have any special requirments in relation to the way to vehicle will be run, please let us know in advance. 4. The dyno day is held for rear wheel drive cars only, with the exception of 4WD's ONLY if they you take out your front drive shaft before arriving. Legal Terms: Prior to placing the vehicle on the dyno, you will be giving a form to sign authorising your vehicle to be placed on the dyno. 1. You must state on that the max RPM range to take your vehicle to. 2. By placing the vehicle on the dyno, and signing this form, Nizpro does not accept any responsibility whatsoever, in any way, manner or form in relation to any Engine/Fitment damage that may occur to the vehicle or yourselves. 3. Before your run, it is expected that the vehicle is warmed up and ready to go on the dyno. 4. Remember to check that your vehicles oil and water levels are correct. What do I do now? Put your name in this thread if you will be attending the day (June 16th), at Nizpro Turbocharging (Bayswater, Victoria) Remember, if you are not in Victoria and want to attend the day at another location, contact the below Dealers/Suppliers for their information! OTHER LOCATIONS FOR DYNO DAY 16TH JUNE NSW: TuneHouse 11 Chandler Street Marrickville, NSW PH: (02) 9557 4000 WA: Xtreme Ford Tuning 16 Runyon Rd Midvale. WA. 6056 PH: (04) 3340 5278 QLD: Elite Automotive 166 Beatty Road Archerfield, QLD 4108 PH: (07) 3274 2445 SA: KPM Motorsports 257 Goodwood Rd Kings Park, SA PH: (08) 8299 9998 Come one come all!

nps still for sale

Hey all... Im here on Behalf of Nizpro to let everyone here know about there NATIONAL DYNO DAY Nizpro Turbocharging in association with Nizpro Dealers and Suppliers are holding this years first National Dyno Day. How this works: We will be holding 3 dyno days throughout the year. The first one being on Saturday June 16th. The dyno day will be held at Nizpro Turbocharging (Bayswater, vic) and also on the same day in NSW, WA, QLD & SA. If you will be attending the dyno day at Nizpro (Bayswater, Vic), please read the details below, and add your name to the list in this thread. If you will be attending the dyno day in your state, contact the appropriate Dealer/Supplier below. Date: Saturday June 16th Location: 6/46 Barry st Bayswater Victoria Price: $45 for 3 runs, Includes a Printout. Details: This dyno day is open to any vehicle make/model! There is no horsepower limit, and Blowers etc are all welcome to be used. There will be trophies awarded on the day. Classes: 4 Cylinder Naturally Aspirated 4 Cylinder Forced Induction 6 Cylinder Naturally Aspirated 6 Cylinder Forced Induction 8 Cylinder Naturally Aspirated 8 Cylinder Forced Induction There will be a BBQ and refreshments served on the day. We will also be showcasing some Nizpro kitted cars on the day. What do you need to provide? 1. Ensure you have at least 1/2 tank of fuel, there is nothing worse than running low on fuel on a full power run. 2. All vehicles must have exhaust systems complete from front to back. 3. If you have any special requirments in relation to the way to vehicle will be run, please let us know in advance. 4. The dyno day is held for rear wheel drive cars only, with the exception of 4WD's ONLY if they you take out your front drive shaft before arriving. Legal Terms: Prior to placing the vehicle on the dyno, you will be giving a form to sign authorising your vehicle to be placed on the dyno. 1. You must state on that the max RPM range to take your vehicle to. 2. By placing the vehicle on the dyno, and signing this form, Nizpro does not accept any responsibility whatsoever, in any way, manner or form in relation to any Engine/Fitment damage that may occur to the vehicle or yourselves. 3. Before your run, it is expected that the vehicle is warmed up and ready to go on the dyno. 4. Remember to check that your vehicles oil and water levels are correct. What do I do now? Put your name in this thread if you will be attending the day (June 16th), at Nizpro Turbocharging (Bayswater, Victoria) Remember, if you are not in Victoria and want to attend the day at another location, contact the below Dealers/Suppliers for their information! OTHER LOCATIONS FOR DYNO DAY 16TH JUNE NSW: TuneHouse 11 Chandler Street Marrickville, NSW PH: (02) 9557 4000 WA: Xtreme Ford Tuning 16 Runyon Rd Midvale. WA. 6056 PH: (04) 3340 5278 QLD: Elite Automotive 166 Beatty Road Archerfield, QLD 4108 PH: (07) 3274 2445 SA: KPM Motorsports 257 Goodwood Rd Kings Park, SA PH: (08) 8299 9998 Come one come all!