gldwgn

was the overall diameter of the wheel the same with the gtr wheel?

series 1 rear calipers are different is the inner and outter pad worn similar or 1 more than the other? if 1 is worn and the other's not to bad may just be the slides in the caliper not sliding freely, if thats the case you should be able to remove, clean and regrease them.

Getting sick of the bus looking steering wheel in the wagon has anyone swapped over a steering wheel from any other models into their stags? don't want to buy one and find out it dosn't fit. have been looking at r34 and s15 steering wheels, would they be the same spline etc.. same airbag plug and clockspring? tiptronic buttons work the same for auto's? also thinking maybe an n16 pulsar wheel being alot smaller, although that would mean loosing the tiptronic buttons..

not sure if s1 is the same as s2 but have you got the auto shifter cable? it attaches to the passenger side of the gearstick and drivers side of the gearbox. and price on rear outer door handles? thanks

Bump Cable has finally snapped Need one ASAP if anyone has one

bump. surely someone has done a manual conversion and has it sitting in the shed

Yeh that's the next mod on the list That run was a 2.311 60' time so should be a big improvement when I get it

calder park 1/4 mile 13.71 @ 106mph

have you got the auto shift cable that goes from the shifter to the gearbox?

s2 rs4-v c34 internaly stock rb25det neo automatic gt3082r turbo made 265.1rwkw @ 18psi

how much for the head? dont need manifolds or coils or anything.

had my shifter cable from the gearstick to transmission melt onto my exhaust on the dyno on the weekend so chasing a new one located in vic. thanks.

frankston (vic)

Getting my car nistuned on the 12th of may and wont need this ecu anymore so thought i'd see if anyone was after a swap the impul chip removes the speed and rev cuts, not too sure what else as it is hard to find info on it. Is curently in my s2 c34 rb25det neo auto awd with hicas. will try and get some numbers off of it today sometime and post them up. will be pickup only from melbourne se suburbs as to make sure ecu's work in both cars after swap $150ono + your standard ecu

hey mate are you willing to split left and right outside doorhandles and post to vic at all?

fitted some rota grids to my rs4v today 18 x 9.5 +27 have about 1mm room between wheel and shock on the rear

thanks for that, got bc coilovers going in this week. not sure what sort of camber ill end up with. the wheel also comes in a 35 offset but thinking that would sit in to close to the strut and i don't really want to run spacers.

ive got clear ebay ones to suit a r50 pathfinder on mine fit straight on with no mods.

been looking through this thread for ages and still not sure if the wheels I'm looking at will fit. wheels I'm looking at are 18 x 9.5 + 20 and going onto a s2 rs4v (auto) from what i can find the fronts should be alright with rolled guards anyone know how the rear will be with the wider rear track of the auto?

due for front pads for my s2, found bendix now has a listing for them db1696 might be worth adding this to the first post in the thread to make it easier to find all the c34 and m35 stagea pads can be found on the bendix website here http://www.bendix.co...an&model=Stagea

yeh that's mine, i see yours getting around the area all the time

Thanks mate, will hopefully get down there

Bit late but anyone know what time this will be in mornington?

might try and come to this

Do you know if these hold 1 or 2 snowboards? Also does it lock the racks to the roof rails or the board to the racks, Or both? Thanks.