sceiron

Not sure of the length but I've got the 350z Tein inner and outer tie rods in my NM35. Part No TRS01-P2410 for inner and TRS01-P2420 for outer. They are beefier and come with an optional spacer to give you increased steering angle. Not sure it's great for my CV's but makes her that much easier to park.

The 12kgs are firm without being harsh. No need to slow down for speed bumps....... well anymore than usual. My spring numbers are :- Front 10kg 62.200.010 Rear 8kg 62.97.255.008 Rear 12kg 62.97.260.012 The BC spring part numbers are the spring specs. Your fronts have an internal diameter of 62mm top and bottom with an uncompressed length of 200mm and a rate of 10kgs. Your rears have an internal top diameter of 62mm, internal bottom diameter of 97mm, free length 255mm and spring rate 8kgs. So you've got the same springs as I do.

I got the Just Jap standard rates of F 10kgs R 8kgs. The rears sat a bit too low for me and I carry a lot of gear in the boot so I eventually got myself a set of 12kgs for the rear. Sits about 20mm higher than the 8kgs.

If it's not too late I've got a standard set you're welcome to borrow.