djay

Desperately need r32 rb20 loom

hey guys just after a rb20det after market ecu like nistune something i can plug in staright away, let me know what u have. cheers daniel

hey guys just wondering if na rb20de cams will fit in rb20det?, just want to know.

ok i decided to gap the plugs to .7 from .8 and now it doesnt missfire at high rpm, so happy and suprised that 0.1mm would make such a difference. thanks for all the help guys cheers.

ok so i found out why there was heaps of water in my tank, the fuel tank breather was facing behind the back wheel so when it was raining the tank filled up with water. so i pulled the tank out and cleaned it properly and blew the fuel lines out and the fuel rail, and replaced the fuel filter and relocted the fuel tank breather line. after all this done it definatly went better but is still missing up at high rpm, bought new ngk copper plugs, gapped to .8 and also tried running lower boost still missing up high, is there any way of testing the fuel pump myself or easier to to get it on a dyno?

yea i replaced the filter again, ill take the fuel rail out and give it a good clean and look over. is the fliter in the rail in each injecter slot? cant really lower boost can i ? its tuned to this psi.? but ill also try a compression test.

hey guys i really need some help sourcing this problem becuase i have now run out of ideas. rb20det boche 044 standard injectors kkr430 turbo tech 16 psi microtech ecu fmic 3" exhuast new copper plugs gapped .8 ill start from the begining, when my car first started miss firing i found out that the fuel filter was block full of brown shit and the tank had water in it, i put a new filter in and cleaned out the tank and put injector cleaner with a clean full tank of fuel. it was still miss firing after i used that tank of fuel. so i bought some new plugs and i borrowed my mates standard injectors and coilpacks which i new were fine, installed plugs, injectors, coilpacks and cleaned the fuel rail because there was a little bit of brown gunk which was clean up any way it was still miss firing at high revs. i have noticed if i dont hold the accelerater flat it doesnt play up.

hey guys i need some help, i bought a pair of projector headlights for my r32 and the wiring seems to be different even though the ones i smashed were projector lights. the new set has h1 and h3 bulbs and the old set had h4 and i think h1 bulbs. when i plug i the headlights in it was stuck on highbeam. do i need to rewire the headlights or is the problem somewhere else?

pm sent

hey guys i need some help it probally has been answered before in the post but i cant be bothered going through it, so im thinking of buying a set of d1rs for my r32 gtst 17x10 +15 all round just woundering how it would fit i have 20 mm wider guards front and rear?