Jump to content
SAU Community

StevenCJR31

Members
 View Profile  See their activity

  • Posts

    1,775

  • Joined

  • Last visited

  • Feedback

    100%

 Content Type 

Everything posted by StevenCJR31

  1. StevenCJR31
    must be poor mechanics if they cant work it out
  2. StevenCJR31
    easily^^^ any stripped out shells out there would most likely be accident damaged or rusted out anyway
  3. StevenCJR31
    if i was you i would replace all six coil packs then you wont have to worry about them for a long time. . choice of brand seems to be a personal thing on this forum so you will get a few different opinions on that
  4. StevenCJR31
    all good. . .this phone is a p.i .t .a to use on this forum thats for sure!
  5. StevenCJR31
    have a look around for a sheet metal worker in your area and they should be able to hand fabricate what you need out of offcuts for example ive had a rear quarter hand fabricated for my datsun 120Y for $200
  6. StevenCJR31
    absolutely nothing . . it was in answer to what roy said on this thread on 01/03 at 14:23 about the intake manifolds being VISUALLY the same on the na 25 and 20dets, i was mearly pointing out that whilst visually the same they are in fact different port size and stud pattern and therefore not interchangable, same top feed fuel injectors and fuel rail tho
  7. StevenCJR31
    this is what im talking about! ^^^ as i said before - the manifolds are visually the same but are in fact different so you can back off and rack off yourself!
  8. StevenCJR31
  9. StevenCJR31
    check that your wheel nuts are tight
  10. StevenCJR31
    could mean absolutely anything. . can you throw a pic on here?
  11. StevenCJR31
    bullshit. . ive got both motors side by side here and the intakes from the r32 rb25de and r32 rb20det DO NOT swap over they ARE different, dont go quoting shit
  12. StevenCJR31
    hi there, does anybody know the internal diameter of the radiator top hose of a R32 ?( i want to order/fit a tefba radiator filter) i would just check my own but the car is stuck at the auto electricians at the moment and could be there for a while yet
  13. StevenCJR31
    if its only a little rust then you shouldnt need another shell for rust repair sections. . small bits can be hand fabricated but if you need to do that then the rust is probably in other areas too
  14. StevenCJR31
    nothing to be gained by fabricating your own dump pipe. . just buy one thats already done
  15. StevenCJR31
    intake manifolds visually same but different stud pattern and the na 25 has bigger ports
  16. StevenCJR31
  17. StevenCJR31
    agreed^^ive stopped to help ppl with thierbnroken down cars and some of the problems have been pretty easy to sort out
  18. StevenCJR31
    where do you find these RB24S ?
  19. StevenCJR31
  20. StevenCJR31
    well maybe the last owner gave the car a hard time to!
  21. StevenCJR31
    ^^thats would be where i would be checking. . especially as you have been giving the diff a hard time
  22. StevenCJR31
    no doesnt sound plausable or everybody would be doing it that way
  23. StevenCJR31
    ^^yes, take the tank out and clean it out with hot water and caustic soda. . this wont stop any rusting so ultimately you will need to replace the tank with a non rusty one
  24. StevenCJR31
    no problemo. . let us know how you go
  25. StevenCJR31
    could be any of a lot of things wrong with it. .(even the convertor) very good idea on the flush but before you do that id be checking the filter screen after you drop off the pan, depending on what / how much crud you find on the screen will be the deciding factor as to wether its f*kd or not
×
×
  • Create New...