33wishes

Have you still got the clutch.

How funny was it, I think the nismo GT3 passed about 8 cars in the last two laps, over boost button 800hp or what.

Have you done any track time yet, what were the tyres like.

Does anyone sell them, make them or modify the standard r33 GTR - GTST rear wing plane.

I have QFM A1RM , squeal like shit on the street.

R33 gtst.

Yer the question is which should I consider, are twin plates over kill for a basic mod skyline, or is bigger best type of thing, are there any down sides to fitting twin plate .

Already have Kni24001 extreme clutch, now sliping.have about 400rwhp. Options are I can rebuild my old OS twin plate from npc $900;or another 1BX extreme $700ish, or nismo copermix twin plate $1200. Do track days , not daily driven ?

Mate to start with take your current wheel off & your offset should be stamped or written on the inside and width. Then go online and find a offset calculator, it will asked you to put in your current specs then it will tell you were your new wheel specs will sit. Remember if it's not aggressive enough you can always add spacers later. But you can't go back .

HKS GTRS Nismo740cc Splitfires Cooling pro stealth fmic Blitz pod filter Blitz LM exhaust Power FC UN opened engine 98 pump fuel

Yer thought I would go to my local racecraft engineer to get some end links made for my sway bar. I gave him the instructions & measures. With rose joint ends , a short and long extensions for a soft and hard setting. Left & right handed threads with matching locking nuts and tapped spacers. You get the picture, and a price tag to match. Only to find out later none of my measurements even came close to working . Engineer says to me try these, a male and female rosejoint screwed together 40 bucks.

not stock about 400hp @wls , I was getting a whistle noise on full boost.like a leak. I since have blocked the mentioned whole , and now whistle is gone, but bov now sounds different.

Oh! Sounds like I need a new one, any recommendations on a tight budget.

So I've read some where on here, what does the little hole do on the inside of the end plate of my bov. I remember something about blocking it up.

I see few guys around , but never hear of events on the sunny coast.