asps91

Well the first think im going to check is going to be compression. I did one when i purchased the car and it was perfect. Every cylinder was around 16X from memory. Its been about 10000kms and 3 years since. The only other things i can think of would be a small boost leak somewhere or a gasket getting in the way.

yea, this is what we have been looking at. Alot of the dyno results i have found using this turbo have upgraded cams but they seem to be in the low 4's. I am quite certain i will be throwing in some type b poncams very soon so it will be interesting to see how much extra we can make. From my comparisons, it also seems to maybe be coming on boost a little late for a .82 housing. I will have to look into this further.

dyno results

Hi guys, Ive just finished my single turbo conversion in my r33 gtr and had it tuned a few weeks back. It made 350rwkw on 23.5 psi of boost through a gt3582r. To be completerly honest i was expecting something a little closer to the 400kw region. Ill list out my mods and maybe a few helpful members with experience using these turbos can shed some light. -garrett gt3582r t3 with .82 exhuast housing -4 inch dump into 3.5 inch straight through exhuast system using a straight through magnaflow muffler -custom made manifold (seems quite strong and well made) no cracks ect -tial 44mm gate with screamer -100mm tube and fit autobahn88 intercooler -2000cc xpurt injectors with a walbro 460, no fuel reg. -adaptronic ecu using map sensor Is there anything you would look at that could be restricting me?

Hi guys, selling my genuine garrett gt3582r. Its the t3 with the .82 4 bolt rear. Has the 4 inch intake. Has a few thousand km's on it but im throwing something a little bigger in. It has not been removed yet and will not be removed until there is a buyer lined up. I can take pictures of it and send them via mms. You can pm me here or contact me on 0404 111 174. $1000 ono Thanks!

R33 gtr fuel pump is not the same, pretty sure thats for a gtst. However its simular. The r33 gtr has the factory pump located towards the top of the cradle with a length of hose and sock at the very bottom. Here is how i did mine.

Bump

Bump

Pm me your number and ill send it off thanks mate

Hi guys, i have the following for sale: -bosch 044 in cradle ready to drop into a r33 gtr. Very limited use form a few days (didnt even make it onto the dyno before i decided to go for a bigger fuel set up) this would be good up to about 350rwkw on e85 and 400+ on pump. $150 ono -r33 gtr mines front pipes (same dimmensions as mines so im oretty sure they are) they have surface rust but that obviosly doesnt effect preformance haha. $100 -80mm rs*r catback exhuast (including high flow 3 inch cat) to suit an r33. $200 -r33 gtr standard intercooler and piping into the engine bay (cooler has a dent on the bottom and a few nicks in the fins) this wont effect preformance. $150 All prices are ono and i am located in sydney. Call or pm. 0404 111 174. Thanks!

Ibe got a almost new bosch 044 ill sell you cheap if you need an extra one. I installed it just to rip it out a few days layer in favour of a walbro 460.

Hi andrew. Not after a relocation necessarily but it would be a bonus i guess. What do you have? I might have sorted myself some cams already but if that falls through ill let you know.

Hahaha

I want this so badly..... Hmmmmm forged engine or a ring for my girlfriend

The knock sensor is very delicate on the 3sgte and there have been many counts of them failing once they take a high reading of knock for your information. Im obviously aware that it is not an mr2, i am just imputing a real world experience i have gone through with simular symptoms. No need to be rude about it mate... We are all here to help after all.

thats exactly what was happening on my overboosting mr2 a few years back. I kept blowing knock sensors.

I do, just had it fitted last week on a completely stock engined rb26. im only maiking 350rwkw to keep it safe but planning to do cams and throw in some head studs and make closer to 400. Turbo from my reasearch should get an rb26 into low 400'kw region.

knock sensor could be throwing it into limp mode right?

Hi guys, looking for some tomei type b poncams and an oil cooler kit to suit an r33 gtr. Let me know what you have. Thanks

Is this for front and rear rotors?

If I've learned anything over the past few months while watching my boss fall victim to a huge business scam is that consumers have no rights and department of fair trading is all for show. No one can be made to do anything they do not want to do. I will never get my money back.... Im pretty certain of this. But i will try and drag his name through the mud. In the grand scheme of things, i have lost a lot more than $280 during this build but it bothers me that he insists that they are genuine after being questioned even before purchase. Sorry about the rant lol

Unfortunatly the coils were so deceivingly alike to the the oem coils i left him good feedback as they were received from the seller really quickly. I was thinking about contacting head office for nissan australia and asking them how they felt about someone selling counterfit products using their brand. If anyone is going to put a stop to it i would think they would. Im even happy for them to take my coil packs for testing. I will be ringing them tommorow.

As i was in the process of slowly piecing together parts for a few months i happened to buy these about 60 days ago.... Outside of the 45 day payPal dispute resolution service. If the guy turns around and tells me that they are fine, i will do anything i can in my power to make sure no one buys these coils. Its more the principle of the matter than the money at the moment. The fact is that there is a guy on eBay selling Chinese counterfeits to the general public and its not only the skyline guys that will cop it. He's selling genuine fakes for other car makes as well. I have put them side by side with my originals and they are so alike its not funny. Only thing that sets them apart is the sizing of the letters for the model numbers being slightly larger on the fakes.

I purchases some of the above genuine fakes.... We had the car on the dyno a few days ago and they were misfiring at around 250kw. Demanded the guy to send me his number on ebay and he is insisting that they are genuine. I was on the phone with him trying to keep my cool for about 30 minuits and hes not willing to refund my money. He has asked me to send them back to send to the manufacturer for testing. Looks like ive lost $300.... Do not buy these! http://www.ebay.com.au/itm/131004016811?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649