Illest

Looking at getting a set of these... Can someone tell me if they will be too agressive for the front. R34 GTT http://yahoo.aleado.com/lot?auctionID=o80925603 I Have trial fitted a set to the back but not the front as time was limited.

1999 R34 GTT S2 Stock ECU Stock AFM Greddy Copy FMIC Stock Turbo HKS Dual Stage Boost Controller 3" Exhaust Stainless Stock Injectors Stock Fuel Pump 186kw @ 12psi Baseline Run with OP6 Plastic Wheel Turbo Dropping off to 9psi.

Thanks for the help sleptema.

Thanks for the reply mate, I had checked out the other other forum but didn't find anything close to the specs I was looking for. Yours sits pretty well! 9.5" will be the way to go then, with +18 or +15 offset, this whole business confuses the hell out of me. Cheers, Michael

Price drop to $4250

Slight camber scrubbing on all four tyres. Note that these are off an Australian delivered R35. Have the tyre pressure sensors in them, and they work.

Been on here a while, don't post very often, but lurk around. I currently have Rays Engineering CE28N's on my 34GTT, which I believe are 18x8 and 18x9 unsure of offset. I am thinking about buying new wheels but I am unsure of what offset to fit, and if I can fit under the guards. I am thinking something a great deal more aggressive Keeping in mind my guards have already been rolled, in Japan. Was thinking of getting these Rota Grid-R's in these offsets, but perhaps there is a better suited offset on the website. 18x9.5 +18 front 18x10 +15 rears http://www.rotawheels.com.au/wheels/rota-grid-r Would like similar fitment to this, maybe perhaps slightly less aggressive. Nissan Skyline R32 fitted with ROTA Grid R 18 x 10, 5x114.3 +15 Cosmic Blue My question is how far can I push the offsets? Also will 18x10's fit under my R34GTT, or is that pushing it too far for the rear, and perhaps 9.5 is too much on the front also? Cheers in advance, Michael.

Item: Nissan R35 2011 GTR Wheels Rims - The highly desirable ones. Way better than the 2009! Tyres: Yes - SP Sport Maxx GT 600 DSST Tires | Dunlop Tires Fronts are 255 and Rears are 285 Pair / Set: Set PCD: 5x114.3 
Diameter / Width / Offset: 20x9.5 +45 and 20x10.5 +25 Location: Northern Suburbs, Adelaide, South Australia Willing to Ship: Yes – Buyer pays
 Price: $4500 Slightly Negotiable. Willing to Swap: No 
Centre Caps: Yes – 4 x Nissan 
Comment: These wheels are in excellent condition and were only used for a short time since new and then switched out. There are a NO marks or scratches on the wheel at all! There is about 35% tread left on the tyres and they are run flat tyres, they cost $1000 each new super sticky, these are the bad boys that GTR's come out from factory in 2011. I am selling as I have other priorities that have popped up, but was originally going to put them on my R34GTT. No stupid lowball offers, and I don't want any whingers about price. If you don't have the money for them don't post here. Slightly negotiable at $4500. Contact: Michael 0411 751 450 - SMS Only Please. I work late nights.

Yep I got one from Nisswreck today.. Yeah thats my thoughts exactly, I was hoping someone on this forum would know.

Hey guys, im halfway through swapping subframe to NON-HICAS. I have a quick question in regard to the LCA's. The HICAS rack end toe arms that im replacing with 180sx rear toe arms which mount up to the knuckles.. Do I need new non hicas knuckles or can I press out the ball joint and use the original knuckle but add a spherical bearing to both sides of the knuckle? I will post pictures when I can, but everything is at the suspension shop getting new whiteline bushes pressed into the subframe and I've asked them to press out the ball joints on the LCA's/Knuckles. Cheers, Michael.

I only ask as I was supplied arms from Nisswreck with my cradle, but they have given me arms which I believe from the front of the rear wishbone to the hub.. not the traction arms. Just want to check it all out before I re-attach the rear cradle to the car again.. and if i need to get these said arms you have or not. Sorry for the confusion, Ive just realised I need Toe arms not traction arms!! They've given me the traction arms!EDIT

Quick Q. Nisskid. How long are the rear traction arms you have? Two holes in them across the bridge, and are they the same length as the ones that come off the wishbone?

I just got these from Whiteline. Part Number: #W92446 For R32-Gts-t Installing tonight or tommorow. I bought a non hicas rear end, but I was supplied arms, but it seems they are the wrong ones I need traction rods? Can anyone verify the length of the stock traction rods for me? Cheers, Michael.

Hey mate, I cant message you Im under 10 posts, had to make new account, its been ages since I've been on here. Im after your rear seats from your 4 door, send me an SMS on 0411 751 450. Cheers, Michael