maklaw

Hey guys am back,you guys always very helpfull. since the day i bought my car,anyways this time.My RPM gauge going nutts,dancing like an monkey .sometime its works fine but very next moment dancing all over the bloody place...lol any light on this issue..i checked thread's no answer's.. so back to you guys,please put some light on this issue..thanx

hey mate,where you in adelaide and whats the contact number..thnx

king spring....go get it mate

hey guys am back lol what do you think about this quote.... A 3" catback system including mandrel bent pipe work, resonator and stainless steel muffler would set you back $980 fitted in stainless steel and $780 fitted in mildsteel.. Now my question is it ok to have cat back exhaust on turbo car...?? Thanx in advance guys..cheers

hey mate join the club,i dont know what's wrong with your shocks or springs... i got a same problem as you facing,i took my car to the pedders in prospect area in adelaide..anyways they checked and found my cars spring not sitting right and rubbing against the body and making noise on every hump and bump... so try to book with some suspension workshop or pedders and they will find the source of these noises...hope its helps.

i dont have much money to spend,coz i am a international student and i have to pay heaps money for study...anyways i will be looking $1000 to spend on suspension.

hey Madaz Thankx bro for your help,i will sure going to give them a call..so they supply and fit too...for road use what coilovers you suggesting for comfort ride..as problem in my car is.... when i bought this car,car was too low so i asked the person to lift up to legal hight and he changed the springs i think.. after few weeks now when ever am going on hump and bumpy roads sound coming from front end,its sound like spring pressing or rubbing on somthing....i dont know what to do..car's suspension making a noises now again dont know its a shocks out or spring not sitting properly.. i think i should go to pedders and check it out...any idea guys..

i use my car as an daily driving and i dont want any coil over because its too stiff and hard ride.i am after comfertable shocks and spring settings. as i read 242 pages in suspension section,most of the people saying KYB and Bliesten good choice..now i am confused which one to choose and where to buy,and how much it cost roughly.. after buying where to go for fitting...so if you adelaide guys got any information where to buy and what and where to go for fitting that will be great....thanx

hey friends i am doing my car bit by bit,and getting help from you great guy's... now i am trying to find some good suspension place to change my r33 suspension.could anyone please guide me. i want KYB with king springs,as i read so many post regarding suspension..and spoke to couple of great members but could not found the place to buy and fit them in my car.. so guys please please help me out...so i just wanted to know kyb is good with king spring,where to buy and how much the price maybe rough idea...and where to go for fitting...who not gona make me fool...thankx

sorry Akizz dont wana be rude,join the club,same problem..so got any good workshop for your problem??

hey buddy could you please,let us know...how much you pay for it...?? if you like send me PM...THNX

i think message reached to people,who cares about spelling....u care i dont..

ok guys listen to this stupid story of mine,i hope you gona think what a sh8...hahaha i bought a car from car yard..dont ask me which car yard bcoz he ripped me off. anyways,i bought the car and few days i found very crank crank noises coming from driver side of the car. i checked but could not found the sourse of the bloody noise,anyways went to the pedders and they suggested its upper control arm of the driver side,which worn and need replacement...asked me to pay $450. i bought upper control arm bushes from motor trader torrence road $100 and went to the my mechnic and he changed them cost me $160... i drove the car and noises still as it is...went back to the mechnic and we checked front bumper(after market) dont ask what kind of bcoz i dont know...but as i checked so many thread in forum i think its GTR bumper on r33 gts-t.which is my car... anyways found that front bumper bar rubbing against the reo bar coz bloody poor fitting...we fixed that and i drove car half the noises gone,next day i went to the panal beater lovely guy near holden hill name fred....he cut the bumper bar a bit so its not going to touch reo bar and noises gone 100%...so my friend before changed upper control arm... check ur front bumper if ur bumper not fitted properly and rubbing against the reo bar,going to make some noises....on every hump and bump...so i lost my original upper control arm +$260+half my day to fix the problem...all because of illdigonose by pedders and my mechnic and myself....i blame myself coz i am new in skyline scene.....

hey join the club,couldn't found any about this spoiler brack light thread...goooofd

motor trader's on torrence road near arndale shoping center got nolothane for $100 and paid $160 for fitting..

hey mate,i also tried to change mine couple of weeks ago,in the end i stuck and then i have to pay to the mechnic he charged me $160. so do same as i did,its not a easy job to do.If you dont know what do to and how....

i am waiting for your reply mate..lol where is the pic's dude..

hey mate know am trying to revive old dead thread but dont have any option,i am having a same problem as you had. so any solution about the bar and reo bar,what you did to fix your problem?.....i am checking all the thread from last few days could not found any solution....so plaese if you still in this forum give me a feed back..thnkx

hey mate i got this kind of similar bumper on my car,thats r33 gtst s1 and bumper touching the reo bar and making a horrible noises over the hump and bumpy roads...so might possible you have to trim your reo bar...

hey mate,i bought my car from car yard nearly 2 months ago.Its r33 gts-t s1 And its got same bumper and its not suitable for s1 coz its touching i think its reo bar and making horrible noise on bumpy roads. i made myself fool beacuse of this stupid bumper hahhaha i thought that noise coming from the upper control arm bushes,so i took to the local padders, as padders told me too and i replaced upper control arm bushes and noise still there...on closer look i found its reo bar touching the bumper and making a noise...so i dont know what to do with this problem.. my advise dont buy it...if u gona buy it..you have to cut reo bar to fit this silly thing..

hey Mate,i had same problem ,regarding ugly looking headlight's.i read number's of post in here about "how to restore headlight's" i found so many usefull things in them. But never got courage to sand my car's headlight's,one day i was in Repco in port adelaide area.And i found headlight restoration kit on spacial,i think it was $50 but i got them $35 as i remember. i just follow the instruction,yeah i sand my car's headlight and they are looks brand new. kit called "headlight restoration kit" and made in USA company name Invision..check it out mate,wont disappoint ya. hey one more thing,they gave me couple of small sand papers(wet and dry),that was not enough so i bought couple of them from MITER10,(wet and dry sand papers,400,600,800,1000,1500,2000)and sand my car's headlight's properly and then follow the instructions and all good..

hey Mate,i had same problem as your friend got it,regarding ugly looking headlight's.i read number's of post in here about "how to restore headlight's" i found so many usefull things in them. But never got courage to send my car's headlight's,one day i was in Repco in port adelaide area.And i found headlight restoration kit on spacial,i think it was $50 but i got them $35 as i remember. i just follow the instruction,yeah i send my car's headlight and they are looks brand new. kit called "headlight restoration kit" and made in USA company name Invision..check it out mate,wont disappoint ya. hey one more thing,they gave me couple of small send papers(wet and dry),that was not enough so i bought couple of them from MITER10,(wet and dry send papers,400,600,800,1000,1500,2000)and send my car's headlight's properly and then follow the instructions and all good.. hope this will save your time and help you..

hey guys my headlights got water in them,i dont know what to do..heavy rain in last couple of days..makes hell in my cars headlight...wat to do now please help..anyone know any workshop who can seal them properly...

Hey Nozila or other guys,could you please give me some idea how much its cost to change "UPPER CONTROL ARM BUSH'S"....or if it is possible for you guys to give me some help to change them....thnx i tried in 5 years old thread this question but some one gets angry,sorry but i wana asked you guys a question it is wrong to write in related thread if thats a 5 year old thread even though the person who started still in the forum? anyways i went to the workshop and they asking $450 to supply and change upper control arm,i doubt it about the price,what do you think guys... Ps.. i tried diffrent thread but couldn't found perticular answer in SA thread...