MMANGO

still chasing all of the above

Still chasing

And bump again

Are these still available? PM'd

bump

After a gun metal grey r32 gtr bonnet and a boot (spoiler or no spoiler I'm easy). Also really would like to acquire a pair of front indicators, I seem to have misplaced mine... Very sad Ps. I'm east Melbourne

bump

bump who's wrecking a gtr?!

I have got stuff from kudos before, but i am looking for a second hand shroud as I will be going to thermos soon enough The bolts are of main concern though Thanks for your help though guys

bump

Still chasing tailshaft to gearbox bolts (Nissan say they dont do them anymore) And gearbox crossmember to body bolts And a fan shroud

>Clutch to Flywheel bolts >Gearbox switches (the ones at the top that screw in), I am assuming they are for 5th gear and reverse? >Gearbox mount >Gearbox crossmember to body bolts >Tailshaft to gearbox bolts/nuts >Front passenger driveshaft to front diff bolts >Top radiator mounting plates (with rubber inserts) >Lower radiator rubber inserts >Fan Shroud Let me know what you have got. Thanks

Brand: NISMO Model:LMGT2 Tyres: x2 if you want them, BCT S800 235/45/17 (not fitted Pair / Set: Set PCD: 5x114.3 Diameter / Width / Offset: 17x9 +16 (GTR Spec) Location: East Melbourne Willing to Ship: Nope Price: 1.6k Willing to Swap: No Wheels are in average to good condition, one (top left) has had the lip bent a bit, still holds air and balances fine, no biggie. There are a few bolts that need to be tightened. Overall a good price for sick period wheel

Hey mate how much do you want for that bracket? posted to croydon north 3136? Your inbox seems to be full

bump

i dont know sorry, its number 2 on this picture

Sorry for the ambiguous request, but I have been asked to get one of these by my engine builder I am not 100% sure what it is, but I have been told its on the drivers side and is GTR specific I have been to nissan and they couldnt help me (but he was a bit of an arse), I have looked at a manual and couldnt pin point it, and i have looked at a R33 RB26 4-door and it would seem it doesnt have it. If it helps its for a R32 GTR if someone knows what it is and has something i can go to nissan with that would be great. Thanks

anyone familiar with what the water pipe bracket is? possibly part number? I might order it direct from nissan, unfortunately I ave just received a list from my engine builder

The following bits are from a recovered R32 RB20DET that was burnt out. All prices are negotiable I was told the engine still ran, however i didnt test it, just took the bits i needed and this is what is left RB20DET Head - no cams, needs a wash $20 RB20 Flywheel $15 RB20 Manual Sandwich Plate $10 RB20 Fuel Rail with aftermarket regulator adaptor - has got a bit hot at the rear end but still straight $15 RB20 Power Steering Pump $25 Aftermarket Fuel Pressure Reg $20 4x Pink top feed injectors $15 Located Croydon, Vic. Happy to do postage on the smaler stuff, but the head will need to be picked up.

still chasing the rear water pipe to head bracket and the AC bits

GTR specific - Knock sensor wiring harness - Rear water pipe to head bracket - Coil pack cover bolts R32/33 bits - A/C tensioner pulley - A/C compressor bolts Also need to know the best place to grab - crank angle sensor seal (round one with 3 bolt holes) - cam idler bearing - cam tensioner bearing I will give nissan a call tomorrow. Thanks for your help in advance

Brand: Desmond Model: Promada Marquis (Regamasters) Pair / Set: Set PCD: 5x114.3 Diameter / Width / Offset: 17x10 +20 Location: Melbourne Budget: $2.5k ish Willing to pay for Shipping: Yes, worldwide Been chasing some of these for a while, now upped the budget and search area. Any help or leads would be greatly appreciated. Cheers

bump

My liberty lost 2nd gear 2 nights ago Chasing a M35 to replace her Will consider anything turbo, not too fussed on what model, but if you must know a preference its a dark AR-X with cruise control Located in Melb. I have the money ready to go for the right beast If you know of anything please let me know Also, how much Japanese remains in these things and can you get english transfers for the buttons?

Hey guys, Preferably chasing a decent condition short block in Vic Will consider long block too Also chasing coil brackets for a R32 GTR PM Me Thanks