lukits01

Ive had a Wolf3D in my auto R33 for couple of years now, no complaints whatsoever havent used any of the extra features though like turbo timer anti lag rotational idle not sure if it has traction control

Yea the vents are like that stock, I removed mine long time ago as the plastics and thin wood sheets have broken, so just made a new one out of 5mm MDF There's this silver box with wires on top of the driver side suspension struts which I have no clue what it does, I had to take it out because it was in the way of my rear strut brace, anyone got a clue if its anything important?

I had a GFB BOV and for some reason its jammed open because the spring isnt stiff anymore even after I tighten it fully, on idle its allready pushed slightly open, and on throttle there is no boost. Might be just a freak occurance though

Does the adapter flange fit RB25 by any chance?

was packed like a madhouse something like 160+ cars they had to clean the track 2-3 times because of breakdowns too or was it an accident couldnt tell

wouldnt mind a dyno sheet to [email protected] How do you think this would go on a 3L RB30?

I plan to put these on then drive to the drag strip, is it ok to drive arround in 13psi cold? was thinking of putting 25psi cold drive to the strip, then let the air out to whateva pressure is best

Makes sense to me, thanks The shocks in question is GAB adjustable damper, so they are not coilovers I would have thought the adjustment would be for bound not rebound To make matters worse, the stickers on the front shocks have peeled off so I cant tell what they are set at But I'll try to go by your advice first SK, cheers

I have adjustable rear dampers, If I set it to maximum softness the car feel underdampen, like its riding on springs, bounces up and down on uneven roads, so I adjusted the damper setting stiffer and it rides fine now. But when I go down to the drag strip should I set it back to maximum softness again?

Subzero Plenum - This is a custom made plenum from Subzero in QLD... It uses the runners from the standard plenum with bellmouths at the top of each runner and comes with Ford throttle body (80mm or 90mm) with antilag kicker solenoid Bought from MetBlue_GTST originally going to put into RB30 convertion but changed my mind. Requires slight cleaning and machining where the runners meet cylinder head to clear up some rough edges Located at West Perth Asking $800 ONO SOLD!!

Hey SK thanks for the advice, I have a oil temp gauge hooked up to my transmission cooler to monitor temps. But my engine is a RB30 with HKS2535 so it boost pretty early Plan to stall it on the line and launch as hard as I can with MT Street ET My street tyres are Bridgestones RE01 and its very easy to spin them on first gear

I have the same problem with mine Ive been told that my pads are missing those anti squeal shims that came with the stock pads. Any idea where I can get these?

cool, thats fairly similar spec to my car actually you think a Auto gearbox with valvebody, shift kit, and transcooler would be fine if I used Mickey Thompson Street ET? considering stock torque converter is arround 2000rpm only and not 6000rpm dump the clutch launch ehehhe

What car is this?

Slightly related question, what gear and RPM is 100KM/h on your RB30?

I have 450cc high flows with a wolf3d running in the engine atm and I get about 13-14L/100Km

Ive bought these high flows http://www.deatschwerks.com/products.html Running them with a wolf and its been fine so far

yeh at end of the day its all comes down to the mood of the guy pulling you over, they can still sticker you. The permit might or might not affect their decision. perhaps the permit makes it easier to get the yellow off? no need to convert everything to stock? I have permits for atmo BOV, catch can, strut brace, suspension, pod, gauges, intercooler and piping Didnt think it was possible to get permit for exhaust and ECU, maybe I'll give it a go next time.

wow, thats pretty low pressure, guess it make sense for drag application thats 12-13psi cold yea?

What tyre pressure do you run in these? about to put these on 300ZX rims in a bit

What about steam cleaning?

yes it is top feed for sure

Does this need an adapter to fit? or is it straight fit?

Hey, So this is a genuine Greddy Type S BOV? I was under the impression that it needed an adapter to fit unto Skyline Was it straight bolt on for RB25 or RB26? Would you be able to measure the distance from 1 bolt hole to another pls? I'll take it for $160 shipped if we can confirm all the details pics of the mounting points would be good cheers lukits01

How about a Set of 16" R33 rims for $200?