lukits01

All Aftermarket parts are GONE! Post Updated

bump

Editted first post PLUS Same car, except RB30+HKS 3037 Pro S 435.1rwHp @ 21 psi [email protected] With overdrive OFF, it was hitting the rev limitter at top of 3rd Gear with overdrive ON reached 121.45Mph

273rwHp @ 12psi SAFC: SAFC-II GearBox: AT Turbo: Factory Exhauset: Catback+high flow cat+front pipe Air Filter: Apexi pod Injectors: Factory Intercooler: Greddy V-SPL Fuel Reg: Malpassi Fuel Pump: Bosch 910 Boost Controller: Greddy Profec B 11-12psi BOV: Factory

Just as a reference My auto with 244rwKw with HKS 2535 on Mickey Thompsons was hitting 12.5 Considering the GT-RS is the bigger replacement for the 2535, it will not have a problem hitting your target supporting mods Nismo fuel pump, 450cc injectors, Wolf3D, and MV Automatic Shift Kit for 1/4 mile leave it on auto, not sure about the BM shifter though

I have a pair of tail lights but it comes without backing plate Couldn't you re-use your original white backing plates?

Yeh, still stock exhaust manifold and plenum other mods explain on this thread http://www.skylinesaustralia.com/forums/in...showtopic=83883 I'll try to see if I can get RPM graph as well as boost

I learnt a few things from this thread so thought Id give back some results GT3037ProS Specifications Power Output: 480PS COMPRESSOR: -Wheel: 56 Trim - 57.0 Inducer / 76.2 Major - Inlet Housing: 100 - Outlet Housing: 50 - A/R: 0.60 TURBINE: - Wheel: 84 Trim - 60.0 Major / 55.0 Exducer - Inlet Housing: T3 - External Housing: External GT-Pro outlet; 0.87 A/R Wastegate: Internal 1.2kg/cm2 Yes it fits without spacer plate You do have to play arround with the turbine and compressor cover to make it fit and a slight modification to the actuator mounts My previous 2535 oil/water lines fitted up with no problems I guess garrett cores use same fittings I had a custom flange made up and a custom split dump pipe, Was told that you do not need a gasket, its a metal on metal connection this is probably the hardest and most expensive part Mainly due to the odd shape of the flange and the orientation of the turbo The intake is 100mm so I had to find a 100-75mm silicone reducer which was a challenge in itself the result on RB30 is below 435rwHp@21Psi

RB30 + HKS 3037 Pro S 56T HKS 256/264 Cams HKS Hi Power 409 3.5" exhaust CP Pistons 450cc High Flow Injector 435rwHp@21Psi more details: http://www.skylinesaustralia.com/forums/in...showtopic=83883

PMs Replied

Wheel Nuts Sold

I have HKS2535 for RB20/RB25 Comes with Inlet silicone joiner (3") Mild steel dump pipe

Have for sale HKS 2535 Turbo T3 Flange Internal gate rated at 380Hp Bought of Yahoo Auction 2nd hand First owner did 15 thou Km and I added another 15 thou Km Made 244rwKw on Rb25 details of power figures and supporting mods are in this thread http://www.skylinesaustralia.com/forums/in...showtopic=83883 Pictures on this thread http://www.skylinesaustralia.com/forums/in...howtopic=162461 Selling due to upgrade NO Oil or Water Lines, can be supplied with 3" mild steel (non-split) dump pipe if required for extra $100 Turbo is Off the car, ready for pick up or delivery $1150+delivery

RB25+HKS 2535 R33 GTS-t Auto + MV Shift Kit 450 cc Injectors, HKS 256/264 Cams, Wolf3D, etc. Best ET 13 Flat with balding 205 tyres, this turbo can get you mid 12s with the right suspension and tyres

RB25+HKS 2535 R33 GTS-t Auto + MV Shift Kit 450 cc Injectors, HKS 256/264 Cams, Wolf3D, etc. Best ET [email protected] with balding 205 tyres, this turbo can get you mid 12s with the right suspension and tyres

As above looking for a set or pair of Z32 300ZX Stock rims size 16*7.5 I believe Will be putting some motorsport R-comps on them so not really interested in street tyres cheers lukits01

RB25+HKS 2535 R33 GTS-t Auto Injectors, HKS 256/264 Cams, Wolf3D, etc. 328rwHp

Bump everything listed still for sale

bump

Yes it fits fine, I have a set myself on my GTS-t Anyone know the offset of the Z32 rims?

Where do you get your RT615, mate?

Any idea how much shipping is to WA for a set of the 225 45 16 ?

Where would I be able to find a set of Toyo RA1, tyrepower don't sell them I think

I bought a NISMO pump second hand, didnt come with the valve Still worked fine, doesnt seem to make much difference

NISMO sells the 7-sided extended long version Lock-nuts I bought a set when I was in their OMORI factory, basically all 20 of them are 7-sided lock nuts that would fit long studs. They also have the racing version which has hollow centres.