JXL

Full set of Zeal Function S springs and Eibach springs. Spring rates Rear 300lb code is 9"FJ/2.25"ID/300LB Front 400lb code is 7"FH/2.25"ID/400LB Function S springs are the predecessor to the S6 series of Zeal springs http://www.gruppe-s.com/S2000/s2ksus.htm Usually they used on S14 and Hondas, i've taken them off my R33 GTST I do warn you these aren't that nice for road unless its the freeway, they are very stiff but on the track there is barely any roll keeps all 4 wheels right on there. ***SOLD*** The springs are quite new, cost me $600 alone and i've barely travelled 3000kms on them still have reciept. Basically the shocks are going out for free. The bushes are a bit worn on the front set, WA Suspension says its not a problem to replace them. email me [email protected] or call James 0413 089 080 Perth Here are the pics

Hey man, the intercooler piping, i'm assuming you taken it out of your R33 and is 2nd hand, is it aluminium or stainless steel? also do you have pics PM me thanks

cool thanks for the replies. Damn its getting damn expensive the problem with the 2nd hand motor you don't know how thrashed that was before and I could be looking at the same problem 1yr down the track. But crap $5-8K for rebuild oh damn. I tried looking for Tomei and HKS forgies on greenline and nengun but none mentioned for a RB25 it only had SR20 or RB26. Can anyone point out a model number??

Hey guys, My R33 GTST is up the shitter, i've been told it needs a rebuild Piston no2 is supposedly has a fracture and is only at 40% compression ratio. I'm looking at over $3K is that right?? Take of the head etc. maybe might have a bad injector aswell Can anyone list me more horror stories i'm about to encounter in there aswell??? Now i'm sort of stuck with the do I get a standard set of pistons or go the forge ones. I've been advised that WISECO are good for it and Tomei HKS and all the other name brands are way out of th price range. Everyone I know is telling me go the forge, because i'm in there anyway do it right and its about $500 more. ANyone know of prices for these mentioned forges around Perth or best to import them direct?? Thanks

Hello Guys, Need a R33 GTST Air Flow Metre all the ones I found in the for sale section already sold. Do R32 ones work for it aswell? Also i've heard the 300zx will also work for it. PM me let me know i'm in Perth Thanks

Damn wrong, this is becoming damn common with performance cars, from what i'm hearing from my police friends. ANd the shit thing HSV thefts are alot lower.

a todays commo would drill you, 1995 commonwhore against 1995 GTS prolly be more like a competitive race. Just go and get an R32 GTR!!!!!!! dont know if you'll need to do much to it but least we are playing in the same price range. Problem solved, and even if you lose, lets see which car gets you around better on a track or tight cornering.

Hey man very interested, do you still have it, can you send pics to [email protected] Thanks James

my problem with that is i spend more on groceries at SUpa Value or definitely Dewsons to get any real saving outta 4 cents off ultimate. with 4cents off i save about $4 on the whole tank getting filled. I checked what I got a Dewsons claremont against what i bought from coles claremont and I spent $115 instead of $100 so i'll just pay the difference for ultimate. Meats especially chicken i've found are more expensive for Dewsons that they are at Coles or Woolies.

man thats a nice car, if only i could afford it

cool thanks for that carlo will try this morning.

good job looks really tidy inside and out.

yeah this is one of the issues that i'm leaning towards getting a PowerFC. seems also tuning houses say there are very few places to get them tune. the $400 all up difference for purchase, install and tune doesn't really bother me but 1 workshop also mention that Wolf's need to be tuned more often is this the case??? Also can anyone advice on not getting a PowerFC if i'm only looking to get to 300rwhp.

with pumping the brake pedal with the brake go all lose like it does when you drain the brake fluid? or is something else supposed to tell you that you've pressed the pedal enough???

bankids have you started to take the car apart yet? anyone been recieving parts???

How do you reset the ECU? do i need to hook it up to a laptop etc?, i've changed my O2 sensor now.

not sure what you mean Boostzor I stil got the sensor if you want it, i've replaced mine with a genuine which I was fortunate to get in a trade.

Have put it in the sale section but thought since being in Perth it may be easier. Its the EL Falcon Bosch one. selling for $60 is brand new. getting rid of it cause I don't know how to do the solder job to fit the rectangle connector. heres the link http://www.skylinesaustralia.com/forums/sh...ead.php?t=71978

^bump

Hello Adamn sorry for the extremely late reply on this I do still have the unit if you are interested. we can meet up somewhere and i'll show you it. I still have the reciept and warranty on the product.

Bump this is not the EL Falcon one it has the rectangle connector so you don't have to rewire

Got a genuine R33 O2 plug here. $100 inc shipping by Express Post, brand new. Usually $155. PM me.

James Work sales for JMills Distribution which is an IT wholesale distributor, I used to work for RTV Computers aswell. Yeah bloody IT industry. Not specialised in anything, basically a jack of all trades but for my interest I want to really to develop to high level network administration. All these IT specialists on here, someone show me how to really make a decent FTP server on Linux (Knoppix Debian) which i've finally got around to having a go at after 7 years. Yes too busy being a lame windows junkie. Also a decent PHP setup so I can make so websites. Who was it working at the DoiR??? I also have completed a Marketing Diploma at Tafe and was applying like mad to get a job there and never got a reply.

can't get it to work get that error timed out thing

become and SAU member, then go down to all the sponsors and ask them to go to town on it