Jump to content
SAU Community

Falco1992

Members
  • Posts

    16
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by Falco1992

  1. thanks! got 3 more I forgot
  2. few of mine
  3. hmmz comes down to remap anyway, its a stock reflashed ecu by the way. planning on hks gt2510s so will get all that sorted with the remap. thanks guys.
  4. I recently found out that my car is limited to exactly 230km/h. I don't drive these kinds of speeds that often, but Im going to the Nuhrburgring next month so I want this sorted out. Im pretty sure its an ignition cut (could tell by the 5 foot flames coming out the back when limiter is on) I know wire #53 has been cut already, but strangely enough its still limited. When I reach 230km/h the ignition is cut off untill I go back to about 220 then it would go back to 230 again. The car has got a custom map done by RSP in the UK. The speedo clock is stock and not converted to Mph. Anyone got an idea? apart from a 3 inch exhaust, 550cc denso injectors, hks induction, boost controller and custom map the car is stock.
  5. do I have to re-adjust the CAS with timing light after the cam gear is adjusted on the dyno? Or can I just mark the CAS and re-install the same way? Also 1 degree at the cam pulley would be 2 degrees at the crank, so in what degrees are we talking about advancing intake side 4 degrees? is that crank or cam degrees?
  6. okay, But how much degrees do I have to adjust the pulleys? I hear people saying advance 4degr. intake side and retard exhaust side by 2 degrees is this correct?
  7. hey guys, My hks cam pulleys havent been adjusted yet, so I am considering to adjust them a bit if it's actually worth the effort? And what is the best possible timing to gain high end power? it's an '94 r32 gtr, 555cc injectors, hks induction kit, full 3inch exhaust, running .75 bar boost. I've read some topics with random people saying advance intake side 4 deg, and retard exhaust side 2 deg. but I need someone who's got some experience with this before I get into trouble.
  8. No I'm from Holland, I was told by the previous owner (from UK) the 408hp was at 1 bar of boost, and he got me another dyno read out (345hp or so) wich believed to be at .75 bar of boost. I will take a look at the turbo's tomorrow, as for the boost. If i find out it's just stock turbo's then I think the best way is just get them rebuilt with steel internals and not go further than 1 bar.
  9. I just got the car 2 days ago, I got lots of paperwork including receipt from RSP anyway here it is speclist far as I know HKS mushroom filters Toad alarm system Nismo lower strutbrace Poly bushed upper mounts Rising Sun Performance custom chip Bilstein dampers splitfire coilpacks Denso purple top 550cc injectors steel braided brake hoses engine brace Greddy PRofec B spec-II boostcontroller 3 inch full exhaust Havent checked the turbo's yet so it may be upgraded ones,
  10. Ive got a dyno read out so pretty sure it is
  11. Hey guys I recently bought myself a r32 gtr with some mods already done to it such as 550cc injectors, full 3 inch exhaust, hks induction kit, boost controller and some other stuff. it's got stock ceramic turbo's but has been dyno-ed and mapped by RisingSunPerformance (14,5psi) 408,3 HP @ 1 bar of boost Considering it's going to be used for track days, I dont think the ceramic turbine will last long at 1 bar of boost, so I'm thinking about rebuilding it with steel internals. But do I need a remap again if I want to run 1,2 bar of boost?
  12. Soho NYC hole in the clouds! taxi
  13. Autumn!
  14. We will see how it turns out, ordering coilovers now
  15. my hcr32 with 18 inch alloys wich I do not prefer as they are very weighty and a tad oversized but still not happy with how it looks atm, needs serious lowering + 17inch dished alloys, but since I'm using it as a daily driver, and my front lip is already kissing the 15 speedbumps I have to cross every day, it will be scraping like hell :nothappy:
  16. as long as you don't combine it with driving your car (especially skylines) it's all OK
  17. Hi there everyone! After some time collecting very usefull information from this forum, I'd tought lets join this community too! 18years old, qualified motor mechanic for 2 years now, and enjoying the skyline ownership! Got a r32 gts-t imported straight from JP 4 months ago, upgraded it to about stage1. using it for all kinds of things (daily/trackday once in a while/drifting) This is how I got it It was pretty much bone stock when I got it, exept for an aftermarket catback system and airfilter, such things as turbo swap, FMIC gtr wheels, decat, alignment, underseal etc I did myself. specs: -rb25 turbo swap -Blitz airfilter -3 inch catback -gtr front end -gtr spoiler -gtr wheels -decat (testpipe) -front mounted intercooler -HKS ssqv bov (whistle removed) -apexi boostmeter -momo steering wheel -cusco front+ rear strut braces (things need to be done soon as the funds are there; oil cooler kit/stage1 chip/steel turbo internals/coilover kit to make it bullitproof at the track) This is how it looked after some minor mods (also got some type-m skirts instead of the aftermarket ones that didnt fit so well) turbo swap time! (yes I did swap actuators
×
×
  • Create New...