evlwog

Mate, I'm in ...need to get the dirty honda to you at some stage too Cheers Laurie

hey guys Bump need this gone ASAP, happy to negotiate Dan @ erd will confirm the condition / unused history cheers Laurie

Hi Guys, As per description I have a genuine Nismo twin plate clutch just rebuilt by NPC up here in QLD, I purchased the clutch for $600 (have posts) to find that it needed to be rebuilt which i have done at a cost of $850 ( have invoice) and now i find out it wont fit r32 GTR or R33 GTR so yeah i'm pissed !!! it owes me $1450.00 and I can't use it !!! I'm so over it that i'll take a hit on it SO MAKE ME A REASONABLE OFFER BETWEEN $1100.00 and $1450.00 will ship at buyers cost need it gone to fund the new clutch that will actually fit !!! sms me on 0420 939 950 Cheers Laurie

that is shear porn ..... !!!

Hi Guys, I have the following for sale will split or you can buy the whole lot Genuine GT3582R in mint condition with a .63 and a brand new .72 kinugawa exhaust housing OIL and Water Lines kit (unused) Braided Kinugawa set rb26dett Top Mount Single Manifold ( Steampipe, custom made) rb26dett Chasing $1200 for the lot, owes me alot more. SMS me on 0420 939950 if interested pics to come , Located in brisbane, will ship at buyers cost Regards Laurie

Any news man ? hope you have it recovered in reasonable condition shout out if you need a hand with anything happy to help man

Hi Guys, Have a Mines ECU speed limiter removed, my car has cat back exhaust with decat pipe, 1.2 bar boost, pod filters (ran stock airbox when i got it), std fuel pump,inkjectors and AFM's, had the car dyno'd and A/f 's are all good ran 197kw ATW on 14psi. Need to Sell $150 sms or call 0420 939 950

honestly man, I have had the eboost, gizzmo , evcr and profec b and the best one by a long shoot, IMHO, is the profec b you can get them on ebay from japan for about $200-$250

Hi Guys, Stainless Y Pipe Wrapped and in mint condition was going to use it as an upgrade for my R32 but plans changed and need the cash $300 or reasonable offer ****all items are + postage *** Fuel Pump r32 GTR $150 Mines ECU $150 SMS on 0420939950 ebay auction number 110677965974 for photos they are to big for me to upload Cheers Laurie

Hi Guys, Again have to move these, both in mint condition complete with intake and turbine housings and exhaust manifolds. no play in the shafts or anything like that. $600 ono SMS on 0420 939 950 Cheers Laurie

HI Guys, Have to move it on Power FC no handcontroller $750 ono, no problems with it at all, coming out of a running car Feel free to SMS me 0420 939 950 Cheers Laurie

Hi Guys, **Need to move these Price change $1000.00 ono ** 2 genuine r33 GTR turbos rebuilt and unused intake; (HKS Wheel) Inducer 47.5ml Exducer 60.ml Exhaust; (garrett GT) Inducer 44.5 Exducer 53.ml .48 turbine housings which have been machined professionally to fit the larger GT spec exhaust wheel Intake housing Standard r33 which has also been machined professionally to fit the Larger compressor wheel 360degree thrust bearing Brand new genuine Garrett bearing kits through out ( i bought a kit off ebay but the turbo guy refused to use them so i returned them and bought gen garrett ) Balanced professionally and built by professionals Steel shafts Alloy compressors The wheels when compared to std are immensly different and are some what bigger, this set is built to support 300kw+ All the parts are new bar the front and rear housings, i have invoices for most and will provide to buyer, i have also sent the housings off for a clean up I'm chasing what they owe me, They were for my car, but priorties have changed and I now have to sell these:( I'm willing to accept reasonable offers. **Postage to be paid for by purchaser** They are on ebay auction number 110652610802 photos are there for viewing text me on 0420 939 950 or pm if you like

Hi Guys, Pop Quiz, whats the max boost you would safely be able to run through std R34 Ball bearing turbo's i'm thinking about 1.2 bar and what sort of power would you expect ? cheers

Guy's, Eboost is sold, Twins still available will consider all reasonable offers

Not these particular ones, they are fresh . Mods would really depend on what your chasing, these would bolt on and run 18 psi reliably, the thing is whats the fuel the tune etc. Intake wise STD airbox is proven to cope with 300kw + with the right filter. I would suggest an exhaust and decent airfilter, put it on a dyno and adjust boost to acceptable parameter. One things for sure at 1 bar of boost you will get much more than the std set up power wise, more efficiency and anything more than that you wont need to worry about the exhaust wheel dismissing itself from further duty

Hi Guys, Chasing $1300.00 for the pair of twins, really gutted i have to sell this stuff, but family takes priorty over the gojira 2 genuine r33 GTR turbos rebuilt intake; (HKS Wheel) Inducer 47.5ml Exducer 60.ml Exhaust; (garrett GT) Inducer 44.5 Exducer 53.ml .48 turbine housings which have been machined professionally to fit the larger GT spec exhaust wheel Intake housing Standard r33 which has also been machined professionally to fit the Larger compressor wheel 360degree thrust bearing Brand new genuine Garrett bearing kits through out ( i bought a kit off ebay but the turbo guy refused to use them so i returned them and bought gen garrett ) Balanced professionally and built by professionals Steel shafts Alloy compressors The wheels when compared to std are immensly different and are some what bigger, this set is built to support 300kw+ All the parts are new bar the front and rear housings, i have invoices for most and will provide to buyer, i have also sent the housings off for a clean up I'm chasing what they owe me, They were for my car, but priorties have changed and I now have to sell these:( I'm willing to accept reasonable offers. **Postage to be paid for by purchaser** They are on ebay auction number 110652610802 photos are there for viewing Eboost street 40 Chasing $280 4 months old ebay id 110652601668 photos there for viewing text me on 0420 939 950 or pm if you like

dibs on PFC, PM sent cheers Laurie

i would definately replace them or at the least have them checked, you can blast some compressed air throught them and ensure they are clear, given the cost vs potential damage they can cause, i would be inclined to replace them.

and where would one acquire said tool ?!?

Hi Guys Question For you all I'm keen to get a nistune board for my gtr but it has a mines ecu, is that going to pose an issue ?

Thanks dude, I have tried to find the vacuum diagram no luck would disconnecting the STD solenoid throw a fault code ?

Hi guys, Just installing the e boost street into my r32 gtr and have come stuck on where to connect the solenoid hose's. Do I disconnect the STD solenoid hoses and use those and if so which would go where ? Or do I leave the STD solenoid and run separate connections ? And if so where from ? Sorry if I'm asking something that's already been answered but I have searched through the forum and not found anything. So any help would be awesome thanks guys.

Hey Scottie Mate I have just bought these through eBay , I have to admit I was really really cagey about the quality, but a mate of mine bought the same set of obx about 11 months ago and no cracks, perfect fit, 400kws ATW so for $125.00 I'm game http://cgi.ebay.com/ebaymotors/ws/eBayISAP...5#ht_1152wt_948

So with this mod they will go straight into an r32 ?

Thats just wrong hahaha see you on Thursday with stews r33 and yes I can more than vouch for the workmanship and the detail that you go to mate ! If only there were more like you