Jump to content
SAU Community

RedDrifter

Members
 View Profile  See their activity

  • Posts

    660

  • Joined

  • Last visited

  • Feedback

    100%

 Content Type 

Everything posted by RedDrifter

  1. RedDrifter
    Yeah they sure do. Thats the base map I'm using at the moment for my RB20DET. The timing is fine untill just after the 64 load point. Neads to be backed off a little as it pings slightly if I run any higher than that.
  2. RedDrifter
    Nothing a set of coilovers wouldn't fix.
  3. RedDrifter
    Heres a pic of a stock R32 GTR ignition map(eccs)
  4. RedDrifter
    Just before 8000 rpm. Ussusally about 7800 going from what my safc tells me. I get 14psi buy 6000rpm. The turbo is a little big for the RB20 i think. It will make really good power but way in the rev range. Would be more suited to an RB25 id say. Oh well gota go with what I got now.
  5. RedDrifter
    They are relatively easy to fit. Just take you time when doing it and always reference the manual if in doubt. Ive installed one in my car and a safc 2 in a mates r32. A bit off soldering here and there. And you'll be fine.
  6. RedDrifter
    How accurate are these figues? Need to get a resonable guess to get me started as i am soon upgradeing my RB20 afm to z32 using the stock ecu.
  7. RedDrifter
    I'm guessing my peak torque would be around 5000 to 6000 rpm. Hopefully I will find out this week at the Ingham car show.
  8. RedDrifter
    Why wouldn't you get it engineered to start with?
  9. RedDrifter
    I had them on the car for about 3 months and then I wanted stiffer so I got those alloy spacers and tottally locked the sub frame. They are just a little faded but would be quite ok still. I have had them sitting in my glove box now for 6 months. The set includes six bushes. You only use four but they change depending on what you want them to do.
  10. RedDrifter
    Damn 3.1 Litres. In an R32 the torque would be insane.
  11. RedDrifter
    RB23 thats with 25 crank and rods in a RB20 block? Surely that would have a decent amount of torque especially with a 2535? Still u dont see that set up often.
  12. RedDrifter
    Yeah RB25 powered R32's will definately be alot more common. Mind you I would love o build an RB22DET using the tomei pistons. That with a decent stage two or 3 cam would be nuts. Mmmmmmmmmnnnnnnnn Maybe an RB25 Neo motor (R34) Now that would be something. Oh well back to reality.
  13. RedDrifter
    I'm all for the RB20. I dont have much below 4500rpm but when it comes on :Bang: Hold onto your hats boys.
  14. RedDrifter
    Whiteline drift pinnaples (used) 50 buck plus frieght.
  15. RedDrifter
    Sorry about the late reply. Yeah mate both rims are 16x6.5" rims with 40 offset.
  16. RedDrifter
    Two coil packs sold. 10 Left. Any Takers?
  17. RedDrifter
    Is this still forsale?
  18. RedDrifter
    Yeah I am thinking the same but its a bit late now to worry about it. Well I guess my ignition system is alot stronger now.
  19. RedDrifter
    Whats the chance of selling just the consult connector?
  20. RedDrifter
    Well I just put in a set of BCPR6EIX-11 and the miss gone completely now.
  21. RedDrifter
    I am running boch 4's and had a bit of a miss when on the gas. Just upgradded to splitfire coils and the miss is less by a long shot but is still there. WIll probs get som BCPR6EIX-11 plugs and I'll let you all know how it goes. Are boch 4's more of wank feature or r they resonable?
  22. RedDrifter
    Just get another R32 diff. I manged to pick one up off the forums for $300 buck derlivered. Was in perfect working order. The Z32 diff is much larger than the R32 diff. Doubt it would bolt up to the R32 sub frame but never tryed so dont quote me on that.
  23. RedDrifter
    RB25 Turbo on RB20 Been there and done that and its a piece of cake to do. Very good power upgrade for bugger all money.
  24. RedDrifter
    My R32 A/C compressor is dead and I need a new one. Does the R31 a/c compressor fit? Or do I have to chase down a second hand RB20 one. Any ideas on what I can do?
  25. RedDrifter
    druzilla32: I just spoke to the bus freight company and they should cost no more than $60 to get them sent down to the brizzy depot. So all up it should be 260 bucks for the lot delivered. P.M. me if you are still want them
×
×
  • Create New...