ben3322

Straight bolt on. Made for the car

M35 whispbar roof racks I have whispbar roof racks to suit m35 for sale. They are the flush bar aero type. Paid $450 12months ago. Looking to get $300. (Too lazy to take pictures, pictures are the same racks though)

Sounds like you're disappointed with it. What's the right price? Keeping in mind, it's a second hand turbo.

What's the deal with these 'intense' turbos? I'm just looking for a basic high flow. Keeping the engine stock.

Can I get this one put through please. 6U9000BNR32304346

Looking for a second hand m35 turbo. Purchase or rent for high flowing. Can't afford to have my car off the road for a high flow service.

I can't remember that exact figure but the 16 inch Davis Craig Thermo that I installed moves somewhere around 2100cfm. I have done 7,000ks since installing and it has been through all sorts of driving conditions. I drove through the mountains near jamberoo on a 42c day and had no dramas. Not to mention a quick 6 hour trip out to condobolin in similar conditions. I would not post a write up on the set up if I was not 100% sure it works. The key to it working is the adjustable Thermo switch set up. If anyone on here installs the exact same set up on their car that I have and has any over heating issues afterwards, I will refund them out of my own pocket and come and reinstall the old viscous fan for them. Provided they have no pre existing cooling issues of course.

Ok so. After 18 months of putting up with the noise, enough was enough. I've finally upgraded to a Thermo fan and ditched the old wind farm running off my water pump. (Viscous fan) For anyone that is interested it takes about an hour an a half but the only down side is, it costs about $320 retail or about $250 trade. If you are going to do this I highly recommend using Davies Craig parts and not cheap Chinese eBay crap. The parts I used were a 16" Davies Craig Thermo fan kit which retails for $230 on their website and comes with all the mounting accessories needed. Part # 0066 (flows over 2000 cfm) And the Davies Craig mechanical thermal switch combo which is $90 on their website. Part # 0400. It comes with a switch that can be adjusted from 40c up to 100c. It can be done without the thermal switch kit but with it, it makes life sooooo much easier when it comes to having the fan come on at the right time. It can be done very annoyingly with the radiator in the car but it is 1000000% easier if you take the radiator out of the car. If anyone needs anymore info just PM me and I'll be glad to help. Ps it is life changing.

Got sick of the speculation so I made it official. Though I was too much of a tight arse to pay the $400 a year to get it the right way round.

Finally opened up the wallet for the whale. BC BR coilovers, falken tyres, new pads and rotors all round (front slotted) and pioneer stereo.

Nah the elm is not compatible with iPhone. It's the same thing but works with iPhone and android.

Does anyone know of any Australian retailers that stock these? Target did sell them but they are discontinued there.

Bc's. $1149 delivered in 2-5days. S-tunes are the same price but you'll be waiting 2-3 weeks. I Don't know if they've changed them in the last couple of years, but the s-tunes in my r34 weren't height adjustable and didn't have the adjustable front tops.

Are the bilstine springs lower or standard replacement?

Anyone got a set of standard springs sitting in their garage that they don't want? Non arx.

Will be going that way when I can afford it. Didn't end up fitting in the top pocket as well enough. Got everything else working in the the end though.

Solved. If your a tight arse like me and choose to fit the stereo into the factory facia (rather than spending the $200+ on the after market one) both the air con controls and the stereo run off the same power supply (constant and switched) despite the individual wiring harness for each.

I've checked all the connections.

I put a new pioneer head unit in yesterday with the aerpro plug and play adaptors and now the a/c controls don't work. Anyone had this issue? Don't have a lot of time to pull it back apart ATM so I'm hoping I can find an answer on here. Very frustrating considering the amount of time I spent making the head unit fit in the top pocket. Any help would be great.

I had it on the hoist on Monday. It really doesn't look that hard. Apart from the turbo, the car is mint. Very happy with it.

It did actually. The shrapnel put 3 small holes in it.

Pics?

Nice example that came into work today.

That's gotta hurt.

I think I'm gonna have to find a place that can make the custom piece for me.