cameron

The break down your feeling is your spark plugs, You need to take them out and re-gap the size down to .7 The reason why its doing this is because under load (boost) the spark is trying to jump the gap (1.2 i think plugs are standard) but isn't getting full spark across so you need to lower the gap. The fuel should be fine at the moment on 10psi, but dont raise the boost any more other wise you will start to lean it out and cause pistons to melt. have fun,

The apexi power FC has its only boost control Kit to adjust the amount of boost you wish to run, but to use this on fc hand commander you need to buy the apexi boost control kit (eg: solonide kit) to be able to contol boost through the hand commander. Or you can buy the AVC-R which is around $700 - This also uses the same solonide (apexi boost control kit) as the Power FC just the avc-r alows you to use more settings eg: start duty, f/b speed, rpm based boost etc. Just extra little functions that you cannot use on the FC commander. Take a look at the apexi usa site: http://www.apexi-usa.com/electronics.asp Hope that helps,

Well done a nice wide power band their.