24jzgte

Hello, Time Has come to do the unthinkable, I am Selling my Parts and whole build, Everything will be going international also so if you don't have the cash, some one else will. A huge list of parts including 2 shells without damage or any history, both complicated RZ chassis. One is still registered in WA one without has a custom Wide body on it. I will List as much as i can and add to the list also. Photos will also follow as im updating this. * jza80 rolling chassis, one in anthracite color original RZ super rare in this color and still registered in WA. Asking $3000. *jza80 rolling chassis, Red RZ no damage to chassis or history of chassis damage, This has a wide bodykit attached unpainted over the original front and rear fenders as this was going to make the molds for the other chassis. Asking $3500 *Original Top secret bonnet, These are rare and cant be bought anymore, has some damage from being stored by previous owner on the ends due to being stood up. Asking $1800 *Original Veilside Intake, no longer in production, has a larger TB, required fabrication with supplied 105mm Flange. Asking $2500 *2jz-Gte Racing Head, CNC machined Top of the line parts, will update this as i need to find the spec sheet, but things like shimless buckets, clearance for JUN 272 hign lift cams, best sounding cams on a 2jz, Pure racing spec head, brand new. Asking $7200 *2jz-Gte Block, Now this block was custom built from the best parts available, it was even tested and made well over 1500hp, Custom CP flat top pistons, billet mains, CNC custom Crank, stroked to a 3.4L, Rods, bearings ect all the best parts and uses 1/2 head studs. Will update with a spec sheet Asking $8600 *2jz-gte twin turbo manifold, Designed with equal Length runners, and perfect engine bay fitment of 2 large turbos to clear strutt brace and bonnet. V-band flanges and dump pipes included. Asking $2200 *Lemans Racing turbos, super light weight and designed to last heavy racing conditions. Size equivalent to GT30R, comes with lines and speed censors, and 2 different Ar housings. Asking $2000 Each. *Lemans Racing Turbos With Variable Turbine Geometry also the size of a GT30R Brand new Asking $2500 Each * AP racing Pedal box with tilton Reservoirs Asking $1800 * jza80 Mint speed titanium strutt brace. Asking $500 *BBS e88 Centerlock wheels, 10.5 Fronts and 13 rears in 18" sizes, can also be changed and hub adapters for any car to run center locks also they are the rare deep centers. Asking $3800 per set. *Hollinger RD6ss Gearbox, brand new comes with a bell housing, quill shaft, gear indicator, gear lever. Currently the best gearbox Hollinger offer. Asking $18500 *Brembo Racing Brakes FIA spec, top of the line spec, with pads, discs Hats and bobbins. 380x35mm front rotors 355x30mm Rear rotors 6piston magnesium alloy calipers front 4piston magnesium alloy calipers Rear Pads Full floating Bobbins and hats. Asking $8700 *5" thick intercooler core Asking $150 *Setrab oil Cooler asking $90 More Parts To come...... Diffs, ohlins suspention, Pulley kits, UR cam gears ect. PM Ph: 0431 113 255

I Have 2 Super Rare Garrett TR30R VNT turbos. Comp in 70.68mm ex 47.99mm turbine 59.11mm they will fit on tial vband housings. Compressor is Made from Magnesium with a Wiggins clamp flange on the outlet. Internal is titanium Turbine housing is made from inconel. These are super heavy duty but very light weight lighter than any street turbo of similar size. Retail for one turbo is over 10,000USD and even then not sold to general public. These 2 turbos will work on Diesel and Petrol engines. Price:$5200 for both. Pm - Ph 0431 113 255

Same front calipers can be found on these 2 cars for reference http://www.importtuner.com/features/impp_1101_nissan_bnr34_skyline_gtr_vspec_ii_n1/ http://www.modified.com/features/modp-1103-1991-nissan-skyline-gt-r/

Details As follows. I have a full set of Brembo racing brakes. Front and rear calipers full monobloc cnc. Front 6 titanium piston Rear 4 titanium piston Racing Rotors (72 Vane Top spec) 380x35mm 355x32mm Includes bobbins and hats pictured, will require hats and brackets made to suit application, i can have this done. Pads included also. Do it once and do it right! These are Rare in 6/4 combo, Used in JGTC, GT, Lemans, ect 30mm wide pads easy change out. Price $9800 PM or PH 0431 113 255

Calipers and disc's have sold.

the bit coin offer ended friday. cash only now.

These brackets will work with brembo GT calipers also, if its the price is to high can arrange items separate, such as disc's or just brackets with the hats ect.

Bit coins are at $1025 per coin atm, if you add that up you can have this kit for just over 7k only a couple of g's over a street ap or alcon kit.

They are 380mm Front and 355mm rear, will fit some 18s" and up

Hey man, thanks for the post, i still have my set for the supra, just have to sell this spare kit and previous buyer deal fell through then the brackets+hats i ordered came for gtr.

Hello, I Have for sale a top spec racing kit from brembo, it is the FIA GT Race kit. Comes with all hardware pictured and brackets plus hats with removable park brake ring should you not want to use it with hand brake. Front disc's have been pre-bedded ready for use. This a very very rare and hard to find set of calipers at this price and condition, most are ex race used with massive amounts of use, these are almost new. Brackets are made to suit 34GTR this kit will fit other series but will require the front mounting holed to be machined out to 14mm. Price $10500 and not a cent less, RRP from brembo values this kit at over $40,000 USD Will also take 7 Bit-Coins For this kit (Before 13th friday) Serious people only, no time wasters. Look for the i phone in the photos to gauge the sheer size of this kit, don't be fooled by the size, these calipers weigh less then the alcon mono calipers and are much smaller. Phone 0431 113 255 or pm, International buyers welcome.

Turbo has now sold.

They bearing design is race specific, internal has adapters to change different wheels sizes and shafts, inside is made from titanium, i would call it something like a triple ball-bearing, they are rebuild-able and last for seasons on race cars with antilag not even needing a rebuild. Located in WA.

Hi, if anyone is keen on one of these rare Bad boys let me know. These are a race specific from Garrett and the public don't usually get their hands on them, The retail of one turbo is $13000 $2500 takes it and the turbo is brand new, i am ordering a set for my self atm so if anyone wants to save on shipping let me know. The turbos are super light, about 8 pounds per turbo. Specs and pics as follows. Titanium comp wheel Titanium Turbine wheel Titanium Turbo shaft Special 1-off race bearing design Magnesium Comp cover Stainless steel V-Band rear housing (for quick Turbo change or a/r change), these are similar to Tial v-band housing but they are made by Garrett's racing devision. Compressor OD ~70mm Turbine OD ~60mm PM or phone 0431113255.

I have a few Genuine BBS Parts Spares Price is per item: $540 For Center (x8) $225 For 2" lip rim half (x8) $245 For 8" Rim half (x4) $255 For 11" Rim half (x4) $65 For Rim Gasket (x8) $65 For Bolt kit (x8) $15 For Wheel Valve (x8) Wheels are in Great condition, all rim halves are straight and true, the centers are the machined alloy with scalloped spokes not the older style cast magnesium. 130PCD on the back side Located in WA, will post interstate Contact Via PM or 0431113255

Ended up being sale at last minute, i can see a crazy GTR coming out soon

To many wannabe's/time wasters in the end, off to the race team the calipers go....on Than note SOLD.

2 Days left, best price i can do is $9000.

Only one week left, Deposit can secure them otherwise calipers are gone to a race team.

I can sell the kit separate with calipers only Front and rear for $5000, The kit price is better for what you get.

Iron rotors not enough, Can supply it with the full carbon deal instead if there is any serious racers out there.

Price Drop, $9500 Last chance to get the whole kit before the calipers go to a race team.

heres an idea of the size.

If anyone is interested Possibly best to contact me via pm or ph on 0431113255. They are from a ferrari f430 GT3 race car, i can have brackets & hats made to suit any car, it will come with Center-lock hats, you can have choice of the deep ones or shallow ones both are pictured. Details as follows: Front Kit. x2 6-piston Brembo Monobloc caliper with removable bridge. Weighs in at 3kgs. Pistons are titanium. x2 Racing disc 380mm x 32mm. Bobbins and hats included. Rear kit. x2 4-piston billet calipers x2 Racing disc 355mm x 32mm Bobbins and hats included. It is possible to run a street pad or some pagid types and drive the car to the track. Price $11,000 you can price the kit up here, shoot me some offers. FIA GT Front and Rear Race System 90F4302 (F) 6-Piston 380x32 mm (15") 2-Piece Discs : Race Technologies Photos:

Hi i have some more bbs e88 wheels, 2 sets on offer, came off a porsche 997 RSR race car. These are the lighter machined aluminium ones they have a center cap you can run the later or early centerlock style racing hubs. Can also be machined for porsche pcd 5x130 stud holes Sizes are 12.5" rear and 10.5" front, may be 1/2" wider i will double check. Will also sell the center sections separate to the rim halves. $3000 per set can be delivered to any where in australia. Ph 0431113255 Pics, tyres not included, they wont last long last 3 sets i had sold out in 4 weeks.