elinaki31

What area

Was an awesome day, first time at Sandown. Was fast haha. Thanks

signing up now on the cams entry, at the bottom i can click to pay for my cams license but will be bringing the filled out forms on the day. just wanted to know if that is okay? Have paid my Sau membership last week. new to all this cams event Thanks

I'm keen

Wish the exhaust was in Melbourne

Sold thanks

Up for sale is a Rb20de engine and auto trans, airbox and afm also included. Motor has a slight lifter noise but nothing major, gearbox seems fine. Everything still in the car so can see it running if you like. any other questions give me a call or text 0422155233 Melbourne south east. 500 for the lot

sorry buddy just got sold tonight. thanks

Up for sale is my 1993 R32 Gtst 60th Anniversary Edition. 60th Anniversary Edition includes Its own trim of interior, Gtr steering wheel and a very nice rear spoiler Motor was removed (166xxx) for a major service using all genuine Nissan parts (Have receipts). Work that was completed. •Timming belt kit •Rb25 water pump (better flow) •Thermostat •Rocker cover seals •Injectors cleaned and pressure tested •Air con re gassed and working •New Exeedy Heavy duty clutch •Hicas lock bar and all lines removed •RB25 Neo Turbo OP6 only had (70,000) •3" Turbo back exhaust not loud nice note, tucked up well so car is over 100mm of the ground •R33 GTST front brakes with Trw Lucas pads all round. •All fluids replaced. Engine, gearbox, diff, brakes. •R33 Lower control arms (increase In camber) •Drift teks 17X8 and 17x9 Potenza re002 up front and ATR sports on rear I planned to keep this car for a very long time and made it as reliable as possible. The next thing on the list was to repaint the car as it does have a little bit of fade on the roof (pictured) and some scratches. Although paint is good for its age I was wanted it perfect. Car will be sold without RWC as I don’t have the time but it’s a very clean car and won’t require much if anything any inspection is welcome, Has rego untill 17/01/2015 Genuine inquires only and no swaps thank you $7,500 0422155233 south east Melbourne

Hey guys after a rolling shell. Prefure it to be an 89 and registerable. but will consider any 32s thanks

bump

Up for sale I have a Genuine plastic r32 gtr front bar with lip. The front bar is in primer and ready for paint. The lip needs to be sanded back and has little scuff marks from driveways but easily filled and ready for paint. I don't have the n1 vents to go with it. $500 located south east of melbourne

bump

bump, Also have R32 silver boot rough needs paint, $20 R32 Black rear bar with reverse lights, $20 R32 taillights black, one hasnt got globes and is a little cracked where the connect but would still work, $40 R32 doors with windows, dirvers side handle missing $40ea R32 front and rear trims $40 for all R32 front stock shocks and springs connected to the arm they connect to without the knuckle $40

n1 boot lip sold

Hey buddy its white, text me and ill send u one. I tried uploading but file to large

Cleaned out the garage need to sell afew things, S13 Just jap Adjustable lower control arms, could also fit other modles. $80 R32 GTR front strut brace, also fits gtst $80 R32 GTR nizmo Dash with only 33,000km, $300 R31 Auto tail shaft been rebuilt, $80 R32 Top camber arms with newish red bushes, $50 TURBO t3t4 internal gated ebay spec $80 3inch Cannon came off a r32 $50 Bosh 044 internal pump working on r32 gtst cradle $100 R32 GTR N1 boot lip, rubber $200 R32 GTR seat modified to fit r31rail, has abit of wear usuall spot $150 R32 rear seat belts $50 R32 Front standard sway bar $30 R32 Rear camber arms $30 Rb20 Cam covers have two pairs, one is blue other is stock. $ 50 a pair R32 GTR 440CC injectors with resistor pack good upgrade for ur RB20. pulled them out as i went back to stock setup $350 Z32 Air flow meter, ebay special $50 Cefiro RB20 Loom $100 Electronic boost gauge$20 R32 skyline plastic trims that run under the door $40 R32 plastic surround behind steering wheel $20 R32 stock boss kit that horn connects to and also hicas plug $40 R32 Gtst castor rod with newish red bushes $50 S13 Throttle cable $50 R32 Lower control arms, good upgrade for R31 same length as s13 $80 Turbo smart BOV $80 R32 gtst Bonnet latch $50 RB20 exhaust manifold $40 Rb20 intake pipes, one with bov other one has been welded behind so u cant see that it had a BOV $50 each R32 GTR TEIN castor rods, will fit GTR AND GTS4 $150 R32 carbon canister $20 Bucket seat, Rails to fit r32 but only the two front holes line up, rears need alittle fixing $50 All items are in South east Melbourne, can ship smaller items. Just text me and ill send you a photo 0422155233

Nice car buddy, i saw you driving it today actually. I drive a silver r32 gtst. haha

Brand: Koya Model: Drift teks Diameter / Width / Offset: 17x8(+34) 17x9(+35) PCD: 4x114.3 AND 5x114.3 multistud Pair / Set: set Tyres: Fronts bridgestone adrenalins re0002 215/45/17 Rears Achillies ATR sports 235/45/17 Price: $1000 Willing to Ship: yes Willing to Swap: nope Location: Melbourne south eastern suburbs Wheels have light scraches as shown in pictures but are over all in good condition. Tyres on these wheels are expensive and grip very well. I paid 450 for just the front tyres afew months ago. Call or text me if you have anymore questions 0422155233

Up for sale is my 1990 Nissan Skyline Gtst Modification list: Lightly ported and polished head and intake manifold Adjustable cam gears Upgraded jap turbo (oil and water cooled) Gtr injectors z32 air flow meter bigger fuel pump Apexi Safc2 computer Front mount intercooler HKS ssqv blow of valve Yellow jacket coilpacks 3" Turbo back exhaust Adjustable shocks DVD head unit This car has plenty of performance modifications, and it does go well. The only thing letting it down is the panel damage that you can see in the photos and also the faded roof. My plan was to re spray it and have an awesome weekend car. The car does have Rego until Feb of next year, but will be sold without a roadworthy certificate. If you have any more questions give me a call. 0422155233

would you send strut brace to melb? inbox me price

thought id update as i found my issue, pressure plate bolts loosened up. Not sure how as i did them up to torque settings. im guessing that my 2way that clunks around everywhere vibrates the drive line and might have something to do with it. Tomorrow i will tighten them up with abit of loctite so it wont happen again. Hopefully never happens again.

pm me if indicators fall through. cheers

Hey guys ive got a r32 gtst was driving fine up to one morning that it was hard to get into gears mostly when stopped and going into first. i changed the slave and bled it heaps and finally got it going was fine for a day and then clutch was grabbing very low and same issue couldn't get it into gear, the next day i changed the clutch master bled it less this time but still feels good and clutch grabbed like it should a little higher. drove around for a day and then the same issues cant get into gear, car does have a noisy thrust bearing even though i changed it 2months ago it usually goes away when clutch is engaged but now it goes quieter but can still hear it. What else could it be? Sucks that its also my daily thanks

haha nah im not on my ps and drive a turbo r32. this is another r32 that ive got with a f**ked clutch was going to change the clutch in it and buy a cheap 20de and fit it as p plate tax is bullshit, easier to sell a non turbo 32 these days, Im in Vic, why wont it still be legal if its running a non turbo motor?