Steg33

PM's sent.

Still on the car but the edging is not in great condition why I hadn't listed it yet. If still interested I can at least put up a pic tomorrow.

Left over parts from wrecking my Black R33 GTST S1.5. All large parts are pickup in Macleod, VIC, but some smaller ones can be posted at buyers cost. All parts are in pretty good condition unless stated and prices should be pretty good unless it's a bit of effort to get the part out. Check out the list and let me know if you further info or pics. HKS Pod filter with adaptor - Needs new foam $30 Intake manifold - No sensors $50 Engine mounts $50 Radiator overflow bottle $20 Aircon condenser with piping $50 Power steering pump $75 Power steering reservoir $20 Alternator $65 Fuel pump - No label but was fine for 285+rwkw $60 Clutch master cylinder $50 Manual pedal set $60 Tail shafts $60 Exhaust Decat pipe - Straight 3in bolt on $30 Wheels Impul NS-01 light weight racing 17in inc Federal tyres, 70% frt, 40% rr $600 Front 5 stud hubs $60 Spare space saver wheel $40 Stock Suspension Front castor rods $75 Front upper control arms $50 Rear control arms $75 Brakes Discs Front $40 Master brake cylinder $50 Exterior Body shell Still complianced and registerable $400 Rear reinforcement bar $80 Bonnet latch $30 Side skirts Stock or type M $100 Spoiler - Series 1 No stop light and scratched $30 Bonnet Black - resprayed $120 Boot Black $50 Front wheel liner Front RH $15 Series 1 tail lights pair $60 Indicators Nismo Side - clear pair $35 Interior Front Recaro $160 Wiring loom $120 Rear seats $40 Seatbelt set minus front buckles $60 Instrument panel $60 IP cross car beam $50 Centre console $20 Headliner $30 Handbrake front section $40 Taco - 4in with shift light $60 Pillar trims $20

SOLD pending payment.

I've had some questions about what's with the turbo for it to bolt on. Attached are the pictures of the lines, spacers and pipes/silicons that were on my car. The black hose isn't great but everything else is fine and all included in the price of the turbo as it's no use to me.

It's a low mount Garret GT2876R ball bearing combination with: Compressor – A/R 0.70, HKS exhaust housing – A/R 0.64. Internal waste gate and bolts straight on to a standard R33 GTST exhaust. It was making 285rwkw on my car (but was detuned to 273rwkw @17PSI for reliability) and was on the car for 30,000ks (95% of which were freeway commuting so the thing was never really used) before I parted the car out due to lack of use and dreamers offering low coin. Very minimal/if any shaft play at all and was running perfectly. It's had oil through it and been spun often to maintain the seals. I'm happy to include the custom intake pipe, all lines to fit it up and the exhaust manifold with spacers plates (it needs 2 x 10mm spacers flange on the stock exhaust manifold to fit the big intake housing) because they're no good to me now. I'm asking $600 which is very reasonable for what it is just to get it out of the garage now that most of the car has already been parted out. Won't be taking ridiculously low offers because it will just go on ebay for $650 if it doesn't sell here. The dyno curve attached was great for streeting and speaks for itself.

Rear bumper, gear and handbrake boots, boot trim - SOLD

Sorry mate, no stock airbox. Only a HKS pod and a custom 3" to 4" aluminum intake to the turbo.

I know you're probably after rears in particular but I've got both front 5 stud hubs on arms for $50 in Melb ($80 if you want the discs with them) if that helps at all.

Sorry mate but this was SOLD back in November under another post.

The shell has no dints / bog / rust or anything at all wrong with it. The bodywork was in great nick before I started pulling it down. See pics...

Heater core and Blitz exhaust both SOLD.

I've got a newly sprayed black bonnet and jasma stainless cat back exhaust I could do both for $320 but I'm in Melb . Just on the off chance you were road tripping...

It's currently listed on ebay but if it doesn't sell I'm happy to still sell it for my asking price here. If there's no interest it will be re-listed on ebay. http://www.ebay.com.au/itm/111277311757?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649

Boost gauge and coil packs SOLD

If Dave doesn't find them I've got an R33 RB25 pump and bracket I can send to Sydney for $90 (assuming the GTST fits the GTR?).

Hey mate, The rears are 17 x 8.5 38 and the fronts are 17 x 7.5 35. They're white and are awesome on any darker skyline (pic shows stock but previously had it lowered and looked a lot better). Have a look at the pics for the condition and style and do a search on the NS-01 impul rims for their details. One of the lightest rims you'll get.

You're probably looking for aftermarket coilovers but on the chance that you're not I've got a set of R33 gtst stock coilovers in great condition for $120.

If you get stuck I've got one in Melbourne that I could post to you for $35 total.

I've got series 1 type M for sale. $40 pickup, $55 delivered. The clips are good but it needs a respray The paint is coming off the metal grill (see pics).

Intake manifold is still available. Top and bottom halves included. Throttle body not included. It's not really an aging part so it's still in great condition.

Discs are at 28.7mm thickness from memory which is why they're priced fairly cheap with a bit of use lefy in them. I can confirm tomorrow for you. Washer motors are sold. Thanks

Sorry buddy, Already SOLD. Tail lights and clear indicators are still available on the list though...

Still got it and just gave it a quick wash. Condition is excellent with no issues, see pic. $25 pickup and I'll give you the bracket and hoses with it.

Pm's all replied to