Steg33

Hey mate, I've still got the power steering pump in good order but the thermostat housing went with the motor a while back. Power steering pump $65. $80 delivered.

Yep, still for sale...

A slightly better format than the first: Part Asking $ Pod filter with adaptor Needs new foam $30 Turbo custom intake pipe $60 Intake manifold $50 Custom turbo with internal gate HKS exhaust and Garret internals/wheels. Low mount good for more than 285rwkw $550 Radiator $60 Engine mounts $50 Radiator overflow bottle $20 Aircon condenser With piping $80 Power steering pump $80 Alternator $80 Fuel pump No label but was fine for 285rwkw $80 Clutch master cylinder $50 Manual pedal set $60 Tail shafts $90 Exhaust Exhaust pipe Blitz 3in $200 Decat pipe Straight 3in bolt on $30 Wheels Impul NS-01 light weight racing 17in inc Federal tyres, 70% frt, 40% rr $700 Front 5 stud hubs $80 Spare space saver wheel $40 Stock Suspension Fronts Stock $75 Rears Stock $75 Front castor rods $75 Front upper control arms $50 Rear control arms $75 Brakes Discs Front $50 Master brake cylinder $50 Handbrake front section $40 Exterior Body shell Still complianced and registerable $400 Rear reinforcement bar $100 Bonnet latch $30 Rear bar Stock $100 Side skirts Stock or type M? $100 Rear pods Veilside $70 Spoiler - Series 1 No stop light and scratched $50 Bonnet Black - resprayed $120 Boot Black $80 Front wheel liner Front RH $20 Series 1 tail lights pair $120 Indicators Side - clear pair $40 Interior Front Recaro $160 Wiring loom $150 Rear seats $50 Instrument panel Standard black good condition $80 Centre console $20 Headliner Excellent condition $50 Boot trim $30 Gear boot & surround Brand new $30 Handbrake boot Brand new $10 Taco gauge - 4in with shift light Taco - 4in with shift light $60 Boost gauge - HKS with solenoid $60 Steering wheel Just wheel - needs recovering $50 Steering wheel Airbag $100 Pillar trims each $20

Part Description Asking $ Pod filter with adaptor Needs new foam $30 Turbo custom intake pipe $50 Intake manifold $50 Custom turbo with internal gate HKS exhaust and Garret internals/wheels. Low mount good for over 285rwkw $550 Radiator $60 Engine mounts $50 Radiator overflow bottle $20 Aircon condenser With piping $80 Power steering pump $80 Alternator $80 Fuel pump No label but was fine for 285rwkw $80 Clutch master cylinder $50 Manual pedal set $60 Tail shafts $90 Exhaust Exhaust pipe Blitz 3in $200 Decat pipe Straight 3in bolt on $30 Wheels Impul NS-01 light weight racing 17in inc Federal tyres, 70% frt, 40% rr $700 Front 5 stud hubs $80 Spare space saver wheel $40 Stock Suspension Fronts Stock $75 Rears Stock $75 Front castor rods $75 Front upper control arms $50 Rear control arms $75 Brakes Discs Front $50 Master brake cylinder $50 Handbrake front section $40 Exterior Body shell Still complianced and registerable $400 Rear reinforcement bar $100 Bonnet latch $30 Rear bar Stock $100 Side skirts Stock or type M? $100 Rear pods Veilside $70 Spoiler - Series 1 No stop light and scratched $50 Bonnet Black - resprayed $120 Boot Black $80 Front wheel liner Front RH $20 Series 1 tail lights pair $120 Indicators Side - clear pair $40 Interior Front Recaro $160 Interior wiring loom $150 Rear seats $50 Instrument panel Standard black good condition $80 Center console with new boot $30 Headliner Excellent condition $50 Boot trim $30 Gear boot & surround Brand new boot $30 Taco gauge - 4in with shift light $60 Boost gauge - HKS with solenoid $60 Steering wheel Just wheel - needs recovering $50 Steering wheel Airbag $100 Pillar trims each $20 All parts are available for pickup in Macleod (VIC). Small things can be posted at extra expense. Pics will be posted for each part upon request. Most things are still in excellent condition.

This time pic attached.

Got it out and picture's attached. Still looks almost brand new. PM me if you are keen and want further details otherwise this sucker will be going on ebay for double now that I've taken it out.

I've got one that i bought new 3 years ago and I've been wrecking the car slowerly. Condition should be excellent. Can do it for $50, $65 delivered. Will look at getting it out tomorrow to confirm.

For $70 pickup ( or plus $20 for postage) I will sell the aluminium intake pipe separately but I'd prefer to keep it as a package.

I've got my R33 GTST about to be listed for sale. It's a low mount Garret ball bearing combination with: Compressor – A/R 0.70, HKS exhaust housing – A/R 0.64. Internal waste gate and bolts straight on to a standard R33 GTST exhaust. It made 285rwkw on my car on the dyno (but was detuned to 270rwkw @16PSI for reliability) and was on the car for almost 40,000ks (most of which were freeway) before I parted the car out due to lack of use and dreamers offering low coin. No shaft play at all and was running perfectly. To fit it up to stock it needs 2 x 10mm spacer flanges on the stock exhaust manifold to fit the big intake housing (or I can throw in the exhaust manifold with one already welded on). I'll include any elbow / custom intake pipes I've got for it as well. I'd take $600 (to save the trouble of putting it on ebay) which is very reasonable for what it is and $25 for postage.

Hey mate, It's a HKS boost gauge with solenoid, not boost controller (the list format didn't paste into the post too well). I can still take a pic if that's what you're after? Thanks, Adam

If they're the same as the R33 GTST, which I'm fairly sure they are, then I've got hinges and the latch for $50 in Macleod, Vic. $65 delivered.

Selling a set of R33 GTST stock suspension. They're in great condition with no leaking seals or other issues at all. They were a very comfy but ride after breaking one of my HKS front struts. Will offload them for the reasonable price of $100.

Throttle body now SOLD

If they're the same I've got one for $100 assuming I can get it out easily enough. Pick up in Macleod.

Cable?? There aren't any cables as such on the driver's side of the firewall. There is only an adjustable joining rod from the pedal to the cylinder. Is that what you're after?

Chassis and Engine harnesses SOLD Body harnesses still available.

I'm after $150 for the chassis harness with the fuse/relay box included. Picture below to confirm we're talking about the same harness (circled in red)? It's in great condition except for 2 wires on the dash side that need re-soldering due to the alarm being taken out.

I DID. It's now sold pending payment...

I sure do. $50 delivered or $40 pickup from Macleod.

Front reinforcement now SOLD. Still plenty of odd bits left! Keep the offers coming in...

I've got one in great condition for $45 delivered if you're interested? Thanks, Adam

Just back from holidays so apologies for the delayed replies. - Front chassis harness is still available with fuse box. - Confetti recaro seat is sold BUT other recaro is still available and I'll even take $150 just to move it. - All brake callipers are SOLD.

Rear hubs / handbrake assembly / cables, thermo fan all SOLD

Drive shafts SOLD.

HVAC actuator motos now SOLD.