whitenight27

i think Zack at Cypher Industries is good with stageas. i know he has a c34. and mel at evoR is starting to get in to them as well but i do most of the work my self i only send it to some1 if i not have the tools or i have not done it befor

do u have the rear wiper arm? if so how much and freight to perth 6004

ok no worrys

Would be intro in just the rear now as I have changed the front to 32GTR

dose any1 have the rear rotor specs for a s1 stagea? my mechanic wants to see if he can find something to match before i get skyline 1s and remove 10mm

Yer same I got genuine as well.

Ok can u check if it's a bm57?

what size is it? and are they the same as a r33 GTR?

i would be intro in the front bar. i know u prob wont split it thow. the rest of my kit is 260rs only the front bar is not and just some jap kit

Are u for real.

ok well the 1 my 25det ran in my vl was. and the same for the 1 in my atagea. thats why i going back to stock. no point doing belt with out changing the water pump and tensioner's

Yer but they could be still bad. U need to jack it up and grab the top and bottom of the wheel and wobble the wheel and see if it moves. If it dose u will need to replace. The only other thing I could think is it might be ur abs unit. Also have a look at ur front drive shafts

I'm in Perth. Is it under hard braking or all the time? What are ur wheel bearings like?

ok i got the stock 32gtr hard lines from the caliper will they fit the stag side of the line? and if they do and i now i have the stock gtr lines do i still need to remove that bit from the caliper?

Nar I have a s1 and next to the headlight is the parker. And the fog is in the headlight. The indicator is down in the front bar

the indicators are they the bumper bar 1s? and if so are they clear?

yer i hope u sell grate looking rims. shame about the timing thow as i have wanted a set of these. my mate had some on his 34r and liked the look of them. why every thing ur after come up when ur busy with other things lol

yer i would love them but the timing is just bad. just in the middle of a 26/ man conversion for the stagea. and even if i got would need new rubber as its AWD. just not enough free mula lol

hope that it includes the water pump and tensioner's to be done i believe the gates timing belts are noisy and think stock i better

can u email me some pics of the exhaust? and how much to freight to perth? pmd email addy

would love them for the stagea but have other things at the moment. good rims

how good are the coilpacks?

ok no worrys i am after a bm57

Ok yer was thinking that would need trimming. I would love the lines as well but the guy I getting them off is using them for his new brakes but might see if he has the stock 1s Yer I not know if I will do my self yet as I not have that many tools. I do most things to my car just some things better to not to if u not have the right tools.

Ok getting the 32 gtr brakes for the s1. So the calipers,rotors and pads are a direct fit nothing else needed to make it work?