greddy_skyline

I use Brasso and a few rags and that seems to bring them up like new again. What i do is wash them and wait for them to dry then apply the Brasso and leave for a few minutes then with a clean rag give them a firm wipe off!

thats ok ill still take it. pm me your details. thanks

ok no worries. ill still take it and do you have the plug for it as well?

hey there, ill take your Haltech 3 Bar MAP sensor. Any stats or info? and how much for postage to meblourne? thanks.

hey everyone, sorry to say that the exhaust has been sold. Thanks and sorry.

It was all set up right. The wiring required power from battery to relay then a signal wire to the relay but the negative wire from the pump need to go to the body instead of the returning to the wiring loom. But one of the plug that go into the relay wasn't soldered right so we re-soldered it and all is good now. If you would like to see the wiring instructions just Google the pump (stated in my first post).

yer sorry i cant sell it till late august as I'm wait for my apexi one to come over from japan. so sorry about that

hey, yes about that i forgot to write it in the add. Im in melbourne.

bump? anyone?

pm sent

Sorry for the late reply. Found the issue. When the auto electrician place done the wiring loom they didn't solder one of the connections right. So we re-soldered it and all if good now! thanks guys for all your post.

Hello reader's. Up coming sale. I will be selling my exhaust for R33 Gtst in late august details as follows. (Just giving notice just in case you need to save some coin) -HKS silent hi power cat-back exhaust. -Come's with removable silencer. -Supplied with stainless steel bolts. Asking price $350. Can ship interstate at buyer expense. Can hear while its on the car. Reason for selling I'm going to Apexi N1 exhaust. Any questions my phone number is 0437199496. Thank you for reading

Hey everyone. well ill got a letter from our favorite people the EPA. I need to send my car in for a noise test. So I'm looking for someone in Melbourne that has a R33 gtst stock cat back exhaust. I will only need it for the weekend and happy to pick it up and drop it off and also supply you with some funds for your time if you like. You can text me your number and i can call you or you can call me on 0437199496. I have till the 24th of July to do the test. thanks for reading!

Hey guys, Im after a R33 gtst engine bay fuse + relay block and the whole wiring loom at come with it. It also has to be uncut and had to be from an abs model. Feel free to contact me on 0437199496. I would prefer to pick in melbourne. But happy to buy interstate.

I have the pump out for testing on monday, so keep you updated.

The injectors have just been tested and reconed.

Im not sure what duty cycle they are at. But they also told me that i cant run it over 5000rpm otherwise it will be leaning out.

Hi guys and girls, Im having some problems with my fuel system. My car on the dyno is making 300 RWKW but if the workshop tunes it more than that the car physically runs out of fuel. The fuel system spec's as follows - New areomotive stealth 340 intank pump. - Reconed 8 (something) cc injectors. - New fuel filter. - Stock fuel pressure reg. The fuel pump has been wired up right using 10g wire and a 30A relay as per instructions and has been install and place on the bracket so it reachs bottom of the tank. I called the guys that sells the pumps and said that they are happy to test and replace if needed but he commented that they haven't heard of a faulty one nor did he say its not possible and that that pump should be ok for the job. But im in the process of elimination. But i want to know how much can the stock fuel reg make? Any help would be great! Many thanks

Hi guys and girls, Im having some problems with my fuel system. My car on the dyno is making 300 RWKW but if the workshop tunes it more than that the car physically runs out of fuel. The fuel system spec's as follows - New areomotive stealth 340 intank pump. - Reconed 8 (something) cc injectors. - New fuel filter. - Stock fuel pressure reg. The fuel pump has been wired up right using 10g wire and a 30A relay as per instructions and has been install and place on the bracket so it reachs bottom of the tank. I called the guys that sells the pumps and said that they are happy to test and replace if needed but he commented that they haven't heard of a faulty one nor did he say its not possible and that that pump should be ok for the job. But im in the process of elimination. But i want to know how much can the stock fuel reg make? Any help would be great! Many thanks

hey mate plenum still for sale?

hey mate item still for sale?

ill be interested in that plenum if it comes off hold

Bump I would be also after a plazaman plenum which ever comes first. Second hand, with or without scratch's! thank you.

hey all, I'm after a genuine greddy plenum for a R33 RB25. Would prefer item to be in Melbourne but happy to buy interstate. thank you

hey krayzie. where you talking about the "Exhaust shop" or a exhaust shop? Im trying not to get it towed as much as the car isn't running. so i would have to get it tow there then back home, then to the dyno place to be tuned. thanks