riceline

There are also 2 small bolts up the back of the head that you need to remove. as well as one that sits behind and under your rear cam cover (bit that goes behind the cam gear's) They are only small but you will not get it off without removing them. Good luck mate

Hey mate Yes the DE head does fit a DET head but uses some differnt lines and stuff. Have a look in the RB30 R33 build up in the Forced Induction section for more info. Take it easy. Adm

Hey bl4ck32 Yes the RB25DE is out of a R32 and the valve I was told they are only worth about $30 tops. Take it easy mate

R33Fred : Yes I have the complete stock exhaust (accept for muffler) only catch is that It is still on the car (not yet available). Will be off very soon. Was hoping for $150 for it. Clint32 : I think I do I will check in the morning for you and PM you

Hey guys I am starting to shop around for a new ECu for my car and have been trying to really nut out what would be better for me and what I want. To be honest I'm tossing between the Wolf 3d plug and play and the well tested Power FC. I realise some of the differet features that they have (rotational idle - launch control) and they all seam really good... But my main concern is Pinging/knock detection. I realise that the Power fc will detect knock but do nothing about it accept tell you that it is going on. Question is.. what does the Wolf 3d have or do to tell you what is going on?

91'240sxSE: sorry mate sale is pending on the ECU Crazy180: Sorry no Gearbox

NA no Turbo yes if your really keen check out the topic in forced induction section rb30 into r33 its got ALL of the info you will ever need.

coil pack loom.. goes from igniter box to the coils. Have got a coil pack loom (don't have igniter) how does $50 sound? PM me if your keen mate.

Hey guys Have been looking on Ebay (not sure if that’s a good thing or not) and noticed that there are quite a few places on there that are selling very nice looking mufflers at VERY good prices (like $165) only problem that I am noticing with them is that they have a 2.5inch inlet on them. What I wanted to know, Is it possible to have an exhaust shop change this to a 3inch muffler? Or is it the whole barrel of the muffler is 2.5inch and totally not possible? Thanks guys

Strobo - i don't have the stock wheels sorry mate.. but the exhaust- say $250 for the lot? wont be for a little while as im saving for the new mods. Dump_Pipe: Sorry mate have responded. Check your PM's

so how would it go on a RB31?

Wizard2k : cams included mate

Wizard2k: All that the head needs is a valve as one was taken from it for the head on my car. I also Don't have a CAS for it MSG: Sorry no Ingiter pack

Yep its true My bonnet wont fully close... It closes and catches fine. Just the frount left section (where my pod is) is up a little.. (provides an AWSOME cold air intake to the pod) Can take a photo later on if you like.

Blk33 - responded to you. Wizard2k - Thanks mate keep me informed

Can this be made Sticky please? thanks guys

best stroker kit - Rb30 botom end - rb25 top end

(Updated. Thread was made unsticky a while ago.. Garage was robbed updating as appropriate - They left the engine blocks as I guess they were to heavy) Hey guys I have a Heap of parts from my RB30 build up left over that I'm keen to get rid of. Sick of the space that they are taking up in the garrage. If you have offers please send them my way. Once most of the parts are gone I will be Donating $100 to SAU as a thanks for all that SAU Provides for us. Donated $10 So far RB30 Piston rings (5 Only All complete though) $30 (cost me $90) RB25DE bottom end (has Sump, Oil pump, Engine mounts - No Oil pressure sensor, Harmonic Balancer, Dip stick tube or Dip stick) $150 RB25DET Bottom end (Block, Pistons, Rods, Crank and Cradle) Replaced due to RB30 Upgrade - $200 - RB30E Head - $50 RB30 Inlet manifold Complete Inlet, Plenum, Throttle body and fuel rail - $20 RB30E exhaust manifold - Stolen R32 RB25DE/R32 RB20DET TOP FEED injectors - Stolen R32 RB25DE Non VVT head (Missing 1 Valve) Has Timing belt Cover, CAS Bracket, Cam gears and rocker covers - Stolen Sourced RB25DE Cams as well - Stolen RB30 Engine Mounts - Stolen RB25 Coil Pack's All 6. Have been running in Rb20Det for a few months. selling due to upgrade to spitfires. - stolen Thanks guys

Hey guys... Have been looking on the net for some of the cars that use side feed injectors as well... Found that the WRX uses 440cc side feed Injectors S15 uses 480cc side feed Injectors

Hey guys.. What was found on this? does anybody have any prices at all? Side feed 550cc injectors.

well this is what a Bosh would handle *Bosch 044 pump is 330 litres per hour and supports 730 bhp at 73.5 PSI # 0 580 254 044 *Bosch 040 pump is 235 litres per hour and supports 520 bhp at 73.5 PSI # 0 580 254 040 So I'm guessing a fair amount Take it easy guys

7psi by 1800 rpm mmmm Extra cubes love em!

here is a pic of my turbo on the car not bolted on.. but the nut closest is the one that it needs to goto. The one in the first pic is WATER and the line in the 2nd pic Is OIL. Sorry about the quality of the water pic - did this a while ago.. If your not sure where that is exactly I can grab you another pic if you want... just head out with the digi cam But see if you like that one first. I don't know about the wastegate as i dont have one.. take it easy mate. Good Luck with it.

Come on SK come on... come on... come on SK come on....

I just put those pic's up so that SK could mod them mate.. Thats a standard hook up..