calaistur

Sold pending payment

Sold

Sorry I should have mentioned that the sensor is still in the car. I need to jack it up to remove it and just havent got around to that yet. So YES the sensor is included. Can post a pic up as soon as I get it out. I havent cut any plugs off. The grey wire you see with no end is the connections for the ECU. You just strip back the outer cover to get at the wires. There is another connector to attach your laptop with I havent included in the pic but here is a pic of it from the Tech Edge website. You either have the Display plugged in or the laptop into the grey wire with the black thingy on the end. I installed it myself, was fairly straight forward. You need to find a wiring diagram for your ECU so you know which wires to tap into to. I was using it on a Power FC on my R33 GTSt. I tapped into the RPM, and both knock sensors, plus you get the A/F ratio from the sensor, so on the laptop I was graphing 4 inputs. Software I used was free and available from the Tech Edge website. Have a look here: http://wbo2.com/sw/log.htm

bump

Sorry im in Townsville. Happy to wrap it up nice and secure if you change your mind about it going through the post.

Selling a Tech Edge wide band meter. Cheap and fun way to tune your own car or just to keep an eye on those A/F ratios. Accuracy to within 0.1 which is plenty for street use. See all the details here: http://wbo2.com/2j/2j1.htm Connect to your laptop with the free software and monitor RPM, both knock sensors and A/F ratios. Only requires 3 wires to be connected to your ECU loom. Cost me over $400 last year and has only done a few hundred kms. Im selling car and putting original ECU back in so this has to go. Will sell for $250 firm. I will include registered postage to anywhere in Australia.

Selling Power FC + Hand Controller to suit R33 Series 1 & 2 less than 1 year old. Only seen a few hundred km's in the car. Selling as I am selling the car due to lack of use and cost of keeping it sitting in the garage. Comes with all paperwork and box. Everything is in mint condition. Bought for $1750 only last year. Will sell for $1200 firm. I will include registered post to anywhere in Australia.

Looking buy an R34 SMIC with shroud but doesnt have to have it. Willing to pay $160 including postage to QLD. PM me if you want to get rid of yours Cheers, Justin.

...

I am not sure but i wouldnt think so being a different motor. There are 2 small intakes that match up with the blow off value and something else so they would be different on the R32 othwewise it would be fine

Its $10 to post according aust post so i'll split it down the middle and instead of it costing you $70 , i'll take $60 including postage

^^^

...

bump