Dave.TAS

Hi mark, email me [email protected] I can send you brand new n1 gtr side skirts, highest quality Australian made flexible fibreglass

Hi mate I have rb20 balancer and genuine nardi torino steering wheel, give me a call or text 0409 six three one 092

0409 631 092 I have a buddy club 90mm / 3.5 inch suit r33 Pics and details via phone number

Just get another head, it will be easier/cheaper than getting caps+machining

I have one available, $100 delivered, from series 1.5 0409 631 092

Trust td05 18g on stainless manifold, heat wrapped, with dump pipe with flex joint, and water and oil lines And rb20 ap engineering power FC for r32, Also have 1000cc id100 injector dynamics Will make a responsive 200rwkw and sound beautiful haha 0409 631 092

0409 631 092 $75 delivered

Air filter or exhaust blocked

RB20, 25, 30 clutch and flywheel Located northwest. $800 ph 0409 631 092 ORC-409D-01N (R32, R33) The ORC 409 Single Plate Metal Clutch Kit Nissan is the Competitive Single Plate Clutch kit by Ogura Racing. The clutch is the damper type which will maintain streetability and handle up to 400ps in addition to having excellent engine response with the lightweight chromoly flywheel. Throw out bearing/carrier/sleeve, flywheel bolts and clutch bolts are included. Heaps of meat left, have driven this and other Orc 409d, epic clutches, easy to drive but heaps of bite. Basically "the" drift clutch in Japan. $800 ph 0409 631 092

I have a few r33 diff, $250 delivered 0409 631 092

I have a few r33 diff, $250 delivered 0409 631 092

R33 coilovers Located Northwest tasmania. Delivery ok. $1000 ph 0409 631 092 Silkroad section RMA8 coilovers - 10kg front 8kg rear - 8 level damping adjustment - High pressure charged monotube shock design - Doesn't get much more JDM, silkroad is famous for quality handling. - About $2000 new $1000 ph 0409 631 092 https://fbcdn-photos-c-a.akamaihd.net/hphotos-ak-prn2/s720x720/1383054_10152295198249392_788417562_n.jpg

Also r33 series 2 front guards and fibreglass bonnet with grill available Also silkroad section rma/8 coilovers available for r33

Wanted to sell RB25 gearbox conversion package. Suit rb or sr/jz with adapter plate. Located northwest. $1600 ph 0409 631 092 Full package, had good oil, no swarf, drove excellently. 145xxx km behind stock engine with dampened clutch. -one gearbox with shifter and all sensors -clutch slave -tailshaft -all bell housing bolts -crossmember and mount (R33) $1600 ph 0409 631 092 RB20, 25, 30 clutch and flywheel Located northwest. $800 ph 0409 631 092 ORC-409D-01N (R32, R33) The ORC 409 Single Plate Metal Clutch Kit Nissan is the Competitive Single Plate Clutch kit by Ogura Racing. The clutch is the damper type which will maintain streetability and handle up to 400ps in addition to having excellent engine response with the lightweight chromoly flywheel. Throw out bearing/carrier/sleeve, flywheel bolts and clutch bolts are included. Heaps of meat left, have driven this and other Orc 409d, epic clutches, easy to drive but heaps of bite. Basically "the" drift clutch in Japan. $800 ph 0409 631 092

0409 631 092 But my series 2 bumper is sold pending payment

I have an r33 gtr engine sump, same fit as r32 gtr but better front diff I believe. 110xxx km roughly. Tasmania, can post, can PayPal 0409 631 092

Have, $250 express posted, matching good pair Pictures and details oh four 09 631 092

CALL OR TEXT 0409 631 092 Located Tasmania HKS F-Con V Pro Ver.3.1 with plug in loom for R34 GT-R. Trent hewiston at chequered tuning can tune these HKS F-Con V Pro Gold 3.1 $1200 delivered Spare loom - HKS F-Con Harness NP5-9 (BNR34) $200 delivered Loom will plug in to any RB loom, so with a few small pin changes will run rb20, 25 or 26. Or chop the end off and modify for any engine. Ecu itself can be reprogrammed for any engine. Hugely greater tuning resolution and processing power than power FC (more load points for more accurate tuning) Details: The F-CON V Pro GOLD series of HKS ECUs is the top of the range designed by HKS. For fuel control, up to 8 injectors can be controlled, allowing for 8 cylinders sequential or 4 cylinder twin injector control. For ignition control, up to 6 independent lines can be controlled. Features: • 32x32 INJECTION map. • 32x32 IGNITION map. • 32x32 AFR target map. • 4 16x16 INJECTION sub maps, suitable for different fuel octane ratings. • 4 16x16 IGNITION sub maps, suitable for different fuel octane ratings. • 16x32 INJECTION and IGNITION correction maps based on speed and load. • 32x16 INJECTION and IGNITION correction maps based on throttle and RPM. • 32x8 INJECTION and IGNITION correction map based on individual cylinder and RPM. • 16x8 INJECTION and IGNITION correction map based on throttle change and RPM. • 16x32 IGNITION correction map based on air temperature and load. It also features 4 optional voltage outputs and 2 optional frequency outputs, suitable for: • Replicating airflow voltage or frequency (piggyback-mode) • Airflow-based trigger. • Pressure-based trigger. • Throttle-based trigger. • Speed-based trigger. It also features input switches to trigger scramble mode of various types. Three (3) types can be selected at once, resulting in 8 different combinations. Functions: Fuel Control Standard Injection map: • Main • Main + Sub (twin injector) • Main + Sub + Independent (3 mode injection) Fuel Correction: • Main trim • Sub trim • Throttle compensation • Speed compensation • Start compensation • Acceleration compensation • Water Temperature (ECT) compensation. • Air Temperature (IAT) compensation • Exhaust Temperature (EGT) compensation • Individual Cylinder compensation • Deceleration compensation • Scramble compensation • AF feedback compensation Normal Ignition Timing map: • Main • Sub • Idle Ignition Control Ignition correction: • Sub trim • Throttle compensation • Acceleration compensation • Water Temperature (ECT) compensation. • Air Temperature (IAT) compensation • Exhaust Temperature (EGT) compensation • Individual Cylinder compensation • Ignition Dwell time compensation • AT shift compensation • Scramble compensation HKS Engine Support: v3.0+ HKS F-CON V Pro Gold v3.0+ supports the following engine / crank types: • Toyota: 1JZ-GTE (non-vvti and vvti), 2JZ-GTE (non-vvti and vvti). • Toyota: 3S-GTE (non-vvti). • Toyota: 3S-GE (vvti). • Toyota: 7M-GTE and 1G-GTE. • Nissan: CA18DET, SR20DET. • Nissan: RB20DET, RB25DET, RB26DETT. • Nissan: VG30DETT. • Mitsubishi: 4G63, 6G72. • Subaru: EJ20 (2Group IGN), EJ20 (4Group IGN.) • Mazda: B6-ZE, BP-ZE. • Honda: B16A, F20C (S2000). Firmware / Feature differences between v3.1 and v3.0 v3.1x has the following additional features: • Adds engine support for: 3S-GTE (ST215W), EJ207 (AVCS), M64, 3S-FE, and multi-purpose bosch crank signal. • Fuel correction at idle condition (default 2% throttle or less). • Separate dwell time for main and sub ignition. • Main and Sub IGN vs Battery correction. • 4 instead of 2 optional voltage outputs. • 2 instead of 1 optional frequency output. • AFK can now be connected to "knock window" pin, instead of crank and cam sensor wiring (4 or 6 wires) All the info you could want about hks ecu http://1jzmerc.com/hks-faq/home/ CALL OR TEXT 0409 631 092 Located Tasmania

A good setup with no leaks should hold 20psi no problem, with no hiss noises. In the exhaust area, if you have a boost tee, they will make a hissing noise. It's there job to bleed off boost pressure

I have one available 0409 631 092

I have a genuine hks 2530 t3 rear housing, bolt on for skyline. It's for sale 0409 631 092 with a decent offer.

Have do luck front bar for r33? 0409 631 092

I have wheel spacers and probably some r33 rear hubs as well. 30mins from Launy and devonport 0409 631 092

Text me on 0409 631 092, have ssr professor sp1 (v similar to meister) in immaculate condition

Justin! RB20 cefiro cross over pipe, factory no blow off valve. $50 Also will have s13 knuckle, hub with new bearings and studs finished next weekend, and sr20det calipers (no disc, suit 280mm disc)