Addicted2BoostR34

so any1 meeting befor hand?

thanx mat,e i going all blue im onto the paint just waiting for the guy to get time

me again has any1 used these? i like the idear to spice up the engine bay as i have a blue timeing belt and getting hks cam gears http://justjap.com/store/product.php?productid=19882&cat=&page=3

all im missing would be injec but im onto them 2 keeping my eyes out for a nice set some1 used but went bigger

1000 for plenum and about 500 for there 85 TB.. ill have to look more into it for wat i need as i keep saying its for looks but.. i dont want to get a shitty cheep that ill need to change later on or that will f**k me around

tempted

free just think there a nice idear with the peace you can take out

i work in a saw mill so ill make a set in the next few weeks

found this ill be trying to make a set ( all info pics by ms33) Rank: RB20DET Posts:31 Joined:24-July 09 Car(s):R33 GTR with 400R bodykit Real Name:Mike Posted 29 November 2011 - 05:22 PM I used this from the other forum for getting the angle correct, mine from the wheel to the front of the bumper is 32" unlike his 25". Basically, measure the height from the front bumper to the ground then the distance from the wheel to the front of the bumper. Mine is 25" from wheel to front, and height was 5-5.5", used 5" for safety. So, with these figures you know the angle (for ramps) which is 10.7 degrees. But you know the front must travel at least 25", before hitting anything over 5". Each step is 13" long, and the height is 1.75". Based on 1.75" per step, I know 2 steps =3.5", but 3 would be 5.25". So based on the height from my bumper to the ground of 5", I know that the 3rd step must be over 25" away from the 1st. In theory top one could be shorter and if the height was 5.5" then i could climb 3 steps every 25", instead of 2. And the step could be 12.5" instead of 13". Therefore the ramps overall can be shorter. But I just played safe (ground wasn’t exactly even at measurement). Conclude for shorter ramps: stopper = 1.5" long, top step = 14", next step = 26.5", next step = 39". Next step (could be final step if only require just over 7" in height, I found this sufficient) 51.5", if not next step is 64". Each platform has 12.5". And the shopping list: I bought 3 lengths of 47mm x 250mm x 4.8mtrs of sawn wood from Covers. 1st length 2 x 1380mm and 2 x 920mm 2nd length 2 x 2300mm 3rd length 2 x 1840mm and 2 x 460mm They will cut all this for you. That'll give you the 10 lengths you need to make the 2 ramps. And a box of 10 x 75mm screws. This is all assuming you have at least 5" clearance from your front spoiler to the ground. If less you'll have to re-calculate. Hope this helps.

grate work !! i work in a saw mill ill be make a few sets over the next few weeks grate work mate would never thought of it

blue and white new gears in123 new tyre havent took it for a ride apart from the yard in about 8 monts:( just takes up room

yzf400

meh i have decided going to sell my dirt bike but the plazman planum and TB with the change a nice clutch but witch clutch and brand >.< oh golly

yer i cut my cannon off added a flange to the exhaust and put one on the cannon 2 so if i get sick of the bozo's i just unbolt it and swap them

jaycar have a hid kit in there for about 100$ but you can get them cheeper like 85? just ask they work a treat in my mates stag there the 6000K white ones 2 you just need the right kit because some times if you put the single beam kit in a insted of the dubble the HB doesnt work and wen you lights on HB the hid's will turn off 2 but.... with the hid kit you wont notice ur HB on anyways

white cog if you look at the bonnet catch look left or right and you will see it just behind the light it may have a screw type bolt going to it for easy adjustment or it wont if not go upto a wall close and turn it you will see wat it does then go back like old mate said befor and adjust it right for you

soo finaly got all my hids in ! LB is 10000K 35w kit and HB is 6000K 100W kit ill have to take a pic at night befor the std HB didnt make any diff oer the LB hids but now all i can say is it rapes signs and cooks ppls eyes thought id add a pic so you can see the diff the left side is with both hid kits if on if your a night driveing bandit like me i would get these 100w hids best thing iv ever done no more roo hitting because i didnt see them on the road

cut it from where the flange bend goes to the smaller pipe and weld the it back on? or you want it so you can swap at times?

sex ! $$$ so 1500 Hmm time 2 save or sell some shit

"like"

yes i want to tidy up my engine bay but i dont want to get a shit cheep one that will "do the job"

did you even try i serched R34 HID and come up with this mate http://www.skylinesaustralia.com/forums/topic/269525-r34-gtr-xenon-hid-install/page__p__5483102__hl__r34+hid__fromsearch__1#entry5483102

bump good work

6000k is the best coloure i think you wont be disapointed in them