Jump to content
SAU Community

Diff

Members
  • Posts

    12
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by Diff

  1. wiring is from R32 gtst but adapted, Box is from apexi R33 rb25det. Sorry if I have misunderstood something, Goggel translation is not very good for Danish :-)
  2. Oki thx :-)
  3. cluster ???
  4. When I put the old box (from rb20) on in works fine. It is pin 7 on both box ?? There is 5-6v on the cabel, but nothing on the scope... I think pin 7 is fired , can take the signal from where the hand controller gets it? Or from the engine and run it without the box?
  5. Hello Missing rpm signal on my speedometer. Has thrown a rb25det in an R32 gts-t with an apexi box. There is rpm on my hand controller but not in the speedometer. When I put the old box on it works fine. Can pin 7 (where the signal comes from) be fired and if so, can take the signal from where the hand controller gets it? Or from the engine and run it without the box?
  6. Thank you.<BR closure_uid_9l2gko="2311">The wires are from R32 GTS-T.<BR closure_uid_9l2gko="2312">Does anyone know what color it should be to dash rpm?<BR closure_uid_9l2gko="2313">I can measure the pin 7 of Apexi box if there is signal out?<BR closure_uid_9l2gko="2314">and is the same place apexi hand controller gets the signal?
  7. Hey I've thrown a rb25det from a Stagea (ca. 1995) 4x4 turbo in my Skyline R32 gts-t What is the difference between rb25det from Skyline R33 gts-t rb25det and from a Stagea 4x4turbo Can see the block is different, is there anything I should consider when I order gasket and parts Regards René
  8. Hi, I have created a skyline R32 Gts-t (born with rb20det) and put a Rb25det in it. I have installed Apexi power fc and it works super. The only thing that does't work, my rpm in the original dashboard. It works fine in the hand controller. What could be the problem. Sincerely, René
  9. Ok, I've just read several places that the block is stronger and is more reminiscent of a RB26 block. But also read the Stagea is "only" 235 hp translated with google translate
  10. Hello I´am started to put a stagea rb25det 4x4 engine in my skyline R32 (rb20det) to RWD. Anyone know what the difference between the two engines are, the stagea rb25det and the skyline rb25det? And what I must do to get it to fit? Regards René
  11. Hello. First, sorry for the bad English, I am from Denmark :-) I bought a R32 GTS-T and I am starting to put a RB25det in. RB25det came from a stagea 4x4, and my Nissan Skyline is only rear wheel drive. Have tried with a oliesump from a "normal" RB25det 2x4 but it does not fit, can I get an adapter plate to fit in, or what can i do?? Regards René
×
×
  • Create New...