Mr_G

Hi Guys, Selling my spare set of wheels as I dont need them anymore. Stock EVO 7 rims in very good condition. One rim has a gutter rash approx 15cm long as indicated in the picture. Tyres are around 30-40% on all 4. 235/45/17 Advan A046 and Pirelli Pzero Rosso's Stud pattern: 5x114.3 so will suite Skyline, Supra, Evo, Soarer, Chaser, Silvia etc.. Location: Sydney (St George), will post at buyers expense Price: $620.00 Contact: Jason 0423 324 906 / [email protected] / PM

Hi Guys, Recently my folks purchased some new couches so these blue ones from Freedom have to go. Price: $100 but must be picked up this week Condtion: Excellent! Non smokers, no rips, no tears and no stains. Location: Sydney St George Area Contact Jason on: 0423 324 906 / [email protected] / PM Me

Got these on my Evo if you are keen? 5Zigen GN + Pro Racer 17x8,5 + 30 with Pirelli 235/45 upfront, Advans on the back in 235/45. $1k full set

Bump

Hi All, Pulled the Haltech Platinum Sport 1000 out of my Evo 8 JDM which is less than a year old. This ECU is compatible with any car. Haltech offer looms to suite other vehicles with great local after sales support on their products. Item comes with: - ECU unit - Map Sensor - Data cable - Haltech Sticker - Wiring harness - Patch loom for Evo 8 JDM Item features: * - Fully user-definable 32 x 32 mapping ( Up to 1024 points) * - Wideband "Auto tuning" using user definable target AFR table * - Narrow and Wideband closed loop O2 control * - Staged injection control for multiple injectors per cylinder (inc rotary) * - 3D mapped rotary engine ignition split * - Soft and hard cut rev limiter * - EGT fuel correction * - Tuning via TPS with manifold pressure correction * - Dual map switching for fuel/ign/boost * - Anti-lag (Rally and Launch style) * - Rotational idle * - Launch Control * - VTEC cam timing control * - VANOS cam control (intake cam only) * - True variable cam control supporting late model Toyota's, WRX's and EVO's * - Dual intake runner control * - Onboard 2.5 BAR MAP sensor (or use with external MAP up to 10 BAR) * - Custom sensor calibration (Use your own sensors for temps or fuel/oil pressure etc) * - Open or closed loop boost control ( Road speed, RPM or gear based mapping) * - Closed loop idle control (Stepper motor and BAC type) * - Extra injector control * - Thermo-fan control ( Duty cycle or on/off ) * - Intercooler fan/spray * - Alternator control (Mazda) * - Engine control relay function * - Nitrous switching with fuel / ignition correction * - Staged shift lights * - Aux fuel pump control * - Tacho output (5v,8v,12v) * - Turbo timer * - Torque converter lock up * - Air con request idle up * - Windows 2000, XP, Vista compatible software * - "In the field" updatable Firmware provides all the new features as soon as they are available * - Onboard and laptop data logging with Data Viewer software * - USB communication with laptop/PC * - CAN Bus port for direct plug in communication with Racepak and Aim Dash system. Condition: Excellent working order Price: $1300 Item location: Sydney, can ship interstate/overseas at buyers expense Contact Jason: 0423 324 906 / [email protected]

Hi Guys, Few items for sale off my Evo 8 GSR. Item 1 Stand alone Haltech PS1000 with Map sensor and wiring loom to suite Evo 8 GSR/MR. ECU can be used on any other car, just need to get a loom to suite. Perfect working order, used for 10,000km and around 6mths old. $1,500.00 Item 2 HKS Fcon Pro V with Map sensor and wiring loom to suite Evo 8 GSR/MR. ECU can work with any other car if you get a loom to suite. Perfect working order and came with my car from Japan. This piggy backs onto the stock ECU and im sure you can probably modify the loom to suite other cars such as Evo 7, 9 etc. $650.00 Item 3 Evo 8 stock injectors. These were pulled out of my carwith 43 xxx km's in perfect working order. $180.00 Items located in Sydney and can post @ buyers expense. Contact: Jason on 0423 324 906 / PM / [email protected]

Dont worry mate, im picking them up on Saturday

SOLD!!!! Thanks for coming

^I've had the unit for 4yrs. Its in perfect working order.

Hi Guys, Selling my head unit setup which has been fantastic! This setup allows you to plug in your ipod and scroll through your playlists, whilst charging your ipod at the same time. Also plays dvd's all regions, vcd, cd, mp3, wma etc. Condition: Used but excellent. Never skipped a beat! Comes with: Instructions, wiring loom and both CD-IB100 and AVH-P5750DVD units Price: $400 ono. This owes me over $1300 when I first bought it new. Contact: Jason on 0423 324 906 / [email protected] / PM me Pictures: DVD Unit: http://www.mercadoli...64_2720.jpg&v=E Ipod Unit: http://www.suchartso..._cd-ib100_l.jpg Location: Sydney, can be posted @ buyers expense.

Thanks Bozz, I think it will be the transmission fluid as I did start the car without the radiator connected just to move it, probably explains the red stuff on the driveway! Grrr... Is it easy to top up the transmission fluid? Jason

Hi All, just troubleshooting an auto r33 after replacing the radiator, the car will engage in drive/reverse, however it doesnt seem to have any go. It feels like a worn clutch on a manual as the engine revs, but the wheels barely rotate. Can anyone help? Note that the radiators on the auto have 2 extra rubber lines on the bottom which go to something, transmission? Any help would be very appreciated. Jason

^ Thanks, I ended up putting in a new radiator, got it all hooked up and just running water through the system. This was a weird problem though, since pulling the radiator out and putting the new one in, the auto transmission now has issues, ie feels like it just slips when trying to drive? Car barely moves, engine revs but car barely gets anywhere, feels like a really bad slipping clutch in a manual, without the smell. Note that the radiator actually has 2 extra lines that run into the bottom because its auto. Not entirely sure whether this has had any effect? On a side note, the engine still overheating Any help would be appreciated.

Thanks Guys. If the car isnt blowing any smoke, the oil looks fine, whats the probability it is a head gasket? The temp is fine with the top hose off as im constantly running water through the system when im flushing, i.e not presurised. When I put the cap on, reconnect the top hose and take it for a drive, then the heat goes up and you can hear the overflow bubble. So the blocked radiator is more than likely the problem? Jason

Hi All, Looking to seek some knowledge on an overheating problem with an Auto R33. There was lots of rust in the system, had to flush the radiator numerous times and also replaced the thermostat whilst I was at it. After flushing the whole system out and putting in the new thermostat, the water still boils. Im not too sure how long the rusty water has been sitting in the radiator, but appears to be a long time. Im not too sure if it would be a head gasket either? Even with the new thermostat, the water tends to spit out intermitently, rather than flowing like a river. This is only when the engine is reved and leaving the top hose off to check. There is no white smoke coming out the exhaust so I dont think it is a head gasket. The only things I can think of are; - Water pump - Radiator possibly clogged from all the rust - Head gasket Hopefully someone can shed some light. Im sure it is one of those 3, hopefully number 2! Many thanks, Jason

Hi Guys, Just trying to troubleshoot a problem for a friend. Over the weekend we installed a FMIC and Manual boost controller into his stagea and we tried it on 7psi with no problems, 8psi no problems but running it on 10psi, it would stutter or surge a little around 5krpm before pulling the rest of the way. Please note we grounded the stock manual 2 stage boost control and left it plugged in. We have already regapped the plugs which are now 0.75mm so it shouldnt be a spark issues as far as I am aware. Car is very standard with the only mods being FMIC and boost control. Exhaust is all standard. Any help is more than appreciated. Cheers

Now $2,200... Bumping it up for sau

Bumping it up for the w/end

Hi all, Selling my professors as staggered just doesnt work on Evo's. Being a good price, they wont last long so get in quick. Stud pattern: 5x11.3 Suitability: Skyline, S14/15, Supra, etc Front: 18x9 + 29 with 225/40/18 Nankang NS2 (50% tread, bit of inner camber wear on both). Both rims in excellent condition Rear: 18x10 + 37 with 235/40/18 Falken FK45S (30% tread, bit of inner camber wear on both). One rim in excellent condition, the other has a small tap on the lip indicated in the photos, otherwise excellent condition. All rims have no buckles, never been repaired and balance out fine. Price: $2.3k Location: Sydney Contact: Jason 0423 324 906 / PM / [email protected]

Hi All, Just looking for a set of stock 33 or s15 rims with tyres. Not looking to spend much, tyres must have legal tread deptt. Looking to spend around $200 and looking to pick up a set in Sydney, let me know what you got. Cheers Jason [email protected] / PM / 0423 324 906

Alot of people in Sydney should be firmiliar with this car. Its for sale as ive got a deposit on an evo. Engine mods: -Tomei rocker arm stoppers -Nismo 740cc injectors -Z32 AFM -Oil cooler -43mm Saber Radiator -HKS Type R 103mm intercooler -HKS Stage one camsahft. 256 in / 264 ex 10.5mm lift -Garret 2860RS with .64 rear / s15 compressor cover and Iconel wheels -Braided water lines for turbo -Apexi PFC with Hand controller -Blitz id3 EBC -Bosch 040 fuel pump -Apexi pod filter -DEKA sealed battery with custom battery brace & terminals -GFB Stealth FX BOV -Tomei style GKTECH dump pipe -HPI Twin 3inch front pipe -Trust PE2 Catback off S14 to extend slightly out of the bodywork -Hi-flow "race" cat converter -Spare track exhaust which is straight through pipe and one resonator -Cold air intake scoop -Greddy sandwhich plate Handling mods: -Tein flex coilovers with adjustable camber tops all rebuilt 5000km ago by fulcrum in QLD -Tein EDFC -Whiteline adjustable sawybars front and rear -Adjustable rear toe arms -Adjustable rear camber arms -Cusco carbon fibre rear strut brace -Greddy front strut brace -D-project front castor bushes -D-project steering rack bushes Braking: -BM57 GTR Brake master cylinder -Brake master cylinder stopper -R34 GTT front calipers -Bendix ultimate front brake pads -DBA 4000 slotted rotors front -R33 Rear brakes -Bendix ultimate rear brake pads -R33 handbrake cable setup Driveline: - 4.3 Diff ratio retaining ABS - Tomei TRAXX 1.5way LSD - Exedy lightweight flywheel - Exedy heavy duty organic clutch kit - Standard 6spd box, no problems Exterior: -Vertex side skirts -Smoked rear indicators -Clear side indicators -Vertex rear bar -Flared rear gaurds by Luis @ drift garage -Lipped front gaurds -M-sports front bar -Reflective window tints around 20% -Genuine Japspec headlights with HID and level adjuster -Wheels: Will come with stock wheels and spacers. (A set of SSR Professors could be substituted with adjustment of price) -Spare vertex and stock front bars for track Interior: -Japspec silvia carpert mats -Inside/outside temp digital measuring display (Not too sure what its called as it came with the car?) -Cd player Power: 220rwkw @ 18psi, has ALOT of torque due to diff ratio and 6spd combo, some say it drives like 300rwkw Price: $27,000.00 with stock wheels NSW Rego till Jan 2010. Location: Sydney Contact: Via PM or [email protected]

if for some reason these havent sold, ill bring cash and pick them up Put me in the line

Hey Boro, its Jason, been a while You want to PM me on a price for rear brakes, hubs, and handbrake cable assembly?

Hi Guys, Got my daily for sale as its no longer required. Ive owned it since late last year, and completed a full oil and filter change, air filter change and coolant flush when I first got it. Ive only put around 2000-300km on the car as it only really goes between the train station and back. Its mechanically well, the body has a few bumps here and there and the interior has a small rip on the passanger seat. Its cheap to drive around and on a full tank, you can get around 500km from it for around $30 Details: Manual AM/FM radio + tape player Aircon 1L 3cylinder engine Rego till Mid Oct 2009 187 xxx km's Missing one hubcap Price: $2,250 ono Location: Sydney, sutherland shire Contact: Jason on 0423 324 906 / PM or [email protected]

Attending this as its for a good cause