Run-It-Hard

bump!

Castor rods and camber arms sold! Traction and rear toe left!

you can see clearly how it mounts in the installed picture...

Castor rods sold! rest still available.

Could probably have back seat still. Might press against bottom bolster though. No idea if its andra approved, would need to talk to AGI and ask them.

$500 firm! come get it lads.

SOLD!

I don't think it will as R34 are pull type. It's a standard RB25 flywheel, just easier to use this as it wont need machining. It has seen 1 track day since it was run in/installed.

SOLD!

1. Cusco master cylinder stopper near new Suits R33/R34/C34 Stagea $60 2. HEL braided clutch line brand new in packaging suits R32/R33 non GTR $50 Hoxton park region will ship at buyers expence Adam.

I have a set of brand new GKtech V3 suspension arms to suit S14/S15/R33/R34 (R33/R34 require a non hicas subframe to run toe arms). Since I recently sold my R33, I have no use for them now. They are still in transit from GKTech but I am expecting to see them this week. These normally cost $786 + shipping from GKtech ($20-30.) I'll do them for $700 shipped. Get at me on 0490169671 Thanks, Adam.

Hey guys, Got a NPC carbotic 5 puk clutch and flywheel off my R33 Skyline that I've been wrecking recently. It's near new (less than 3000kms old) and has been a great setup. Nice soft pedal feel with a ton of bite. These clutches handle any abuse you can throw at it and are rated at some silly power figure (400ishkw). Very streetable clutch. Will also fit R32 GTR (push type gearbox) I'm after $650 ono Hoxton Park region Happy to ship at buyers expense. get me on 0490169671 Adam.

SOLD!

I'd be keen.

Now on gumtree: http://www.gumtree.com.au/s-ad/hoxton-park/cars-vans-utes/1997-nissan-skyline-track-drift-car-lots-of-mods/1037578017

bump

I've decided it's time to quit drift for a while. So my R33 Skyline is up for grabs! It's really well setup, plenty of mods and does a good skid. mod list is as follows: Car: 1997 Nissan Skyline R33 Series 2 Km: 147xxxkm power: 236kw on 18psi Engine: Factory RB25DET Gates Racing timing belt Gates Racing water pump Turbo setup: HKS 2535 turbo braided oil line Apexi pod filter blocked BOV Billion cold air feed pipe Hi octane airbox ECU: Z32 Nistune Z32 airflow meter tuned by unigroup Fuel: Walbro 255lph fuel pump Nismo 550CC injectors Ignition: Yellowjacket coil packs Cooling System: ASI 42mm radiator Greddy style intercooler kit ASI silicone radiator hoses Oil control: Greddy 1 litre catch can trust oil cooler kit Exhaust: 3 inch dump pipe 3 inch custom exhaust Gutted catco cat Transmission/Drivetrain: Factory RB25 5 speed manual xtreme drift clutch KAAZ 2 way LSD Suspension/Chassis: DGR sports coilovers 13/10 spring rates Cusco front strut brace Cusco tension brace Whiteline 24mm sway bar Noltec rear LCA bushes generic rear camber arm whiteline traction arm HICAS lock out kit (uses normal toe arms) AGI 4 point roll cage Doluck B pillar brace Full tuned super power brace JDI knuckles KTS tie rod ends Braking: R33 GTS-T brakes Drum handbrake HEL braided lines Exterior: Series 2 front bumper clear sedan front indicators Nismo 400R side skirts EXplosive rear lip Top stage 30mm rear guards JDL roof spoiler Nismo clear indicators DMAX/clear world LED tail lights GTR N1 rear windscreen OEM weathersheilds Interior: GKtech handbrake cover and button leather + blue stitching gear boot covers Fride low max bucket seat Bride seat rail non airbag dash striped sound deadning Instrumentation: Greddy Profec B spec II boost controller Racetech 52mm water temp gauge Racetech 52mm oil temp gauge Racetech 52mm oil pressure gauge The good: Most parts on the car are near new, travelling less than 5000km. It's a turn key drift car. No need to spend extra cash setting it up. The bad: It has no rego (ran out). Only requires a pink slip I broke the rear windscreen trying to remove the rear wiper (N1, no wiper hole rear screen supplied) It's rough around the edges, it's been drifted for 4+ years. I'm after $7500, I will not separate parts so don't ask. Wheels pictured do not come with the car. Not interested in swaps. Located in Hoxton Park region. PM me, my phone isn't working at the moment (frustrating I know). Adam.

HKS exhaust is still avaliable.

looks like this installed. it's only 20mm shorter than the non sunroof cage too.

bump

Please don't PM me, SMS me for pictures. I will not reply to PM.

I've decided to part out my sileighty due to no time to spend on it any more. All prices are slightly negotiable. SMS me on 0416953142 for pictures. All items are currently in Goulburn but will be available in Sydney soon. Recaro SR4 seats Black mint condition, no rails. Minor cigarette burn on drivers seat $1,100 evo8 brake kit for S chassis complete bolt on kit made by MSA, uses Evo 8 brembo calipers, and brand new 356mm slotted rotor and new intima brake pads $1,000 RB26 long nose crank Complete motor, minus hotside, ecu, injectors and coilpacks $2,500 Precision 6262 turbo All parts brand new, powertune RB26 manifold, 44mm precision gate. $3,000 R34 GTT box Pull type, will through in R33 GTST bellhousing (push type) good condition, no crunches etc $1,200 NPC clutch and flywheel Brand new $1,100 Haltech PS1000 type x loom Used for 100km $1,500 VSKF Brand new in box, discontinued 18x9.5 -10 18x10.5 -12 R disk O disk Burning black polished lip $3000 carbon origin rear seats for 180SX/S13 used, has minor scratches but can be buffed out $500 RB20 engine Complete loom, turbo, ecu. Intake manifold off due to blown gasket. $500 2 way LSD Unknown brand, to suit R200 diff. $500 Racepak IQ3 Basically brand new $700 Regamasters 17/18 stagger 17x9 +18 and 18x9 +18 215/40R17 and 215/40R18 50% tread $2,000 hardrace R32 camber arms brand spankers $200 nismo timing belt kit RB brand new $400 ARP head studs RB26 Brand new $250 modified RB26 rwd sump comes with tomei baffle plates $300 3.5 inch exhaust S13/180 Mild steel, tucked up for max ground clearance. Twin tips $350 tomei timing gears RB26 brand new $250 RB20 50mm alloy radiator Brand new $100 S13/180sx racing logic coilovers 11/7 springs Pillowball tops Less than 2000km use $800 R32 GTST front cross member $100

As per thread title. Chasing the front speaker holders (plastic piece that bolts to the door, and speaker bolts to). Also chasing (preferably S2) auto transmission cooler. Happy to pay shipping, etc I'm in Hoxton Park region. Let me know! Adam.

they are 18x9.5 -10 and 18x11 -1

I've got a set of Kei Office coilovers out of the missus' Stagea that need a new home. Great condition, height adjustable without affecting preload. Go nice and low. 6kg springs all round, super comfortable ride quality. No knocks, leaks or anything like that. For Stageas with eyelet mounts on both front and rear. (S1/S2 AUTO) $700 ono will ship at buyers expense. Will get photos up soon!