P.K

Basically thinking of putting in some RX7 FD Secondary 850cc Injectors into my RB25DET, which as far as I know are pretty much identically to Sard 850s, so to do so from my Understanding I need to get some Sard 850 Injector Collars as well as plugs. Getting the plugs isn't hard at all because from what I know there basically same as denso plugs which I can get off ebay for around 10 bucks a plug which I think is a fair price. As for the Collars I'm not to sure where to get them from, I found one set on EBay here, Which is 10 US a Collar and then like 65US for postage since its from the states so will end up around 120AU, Any where else that I seem to find them, there in sets of 4 for SR and seem to cost outrageous amounts, does anyone know a good place to get some Sard Collars so that I can make these fit. Also well on the subject has anyone else done this, I'm quite sure several have, and if so do I need anything else for these to work, not to sure if I need to change the O-rings or not.

Hey All I'm looking for injectors for my Rb25Det, need at least 550cc or bigger side feed injectors, that include plugs and collars to fit Rb25, I'm working on a budget so looking for good condition used injectors basically. Preferably in Victoria otherwise will need good picture and part-no if interstate. Also looking for a decent cond Twin-Plate Clutch for RB25.

Bump, E-manage, Seats still for sale.

Well, given the fact that Decking the Head/Block isn't going to cost me to much, in terms of price if Nissan is selling the standard Gasket for around $150, and a Metal Head Gasket is only going to cost $300, I think I will be getting a Metal Head Gasket, so in regards to the Tomei one i posted up, under the assumption that a standard is off the tables, Is this a good option are their other Metal Head Gaskets out there for RB25DET's that people could recommend?

What do you consider a lot of boast, I'll be running at least 20Psi, Maybe Slightly depending on what turbo I use.

Seems like many seem to Think Genuine Nissan Gasket is the way to go, if that's the case, just for information wise, what advantages are there to actually running a Metal Head Gasket.. if any.

Was thinking of doing my Boot Lid, Roof and Bonnet in Carbon Fibre Vinyl Wrap, Haven't looked into it to much, noticed some for sale in the "For Sale (Business Traders)" Here on Sau, Wondering if the stuff he is selling is good to use and how it is price wise, if no good where would I look to buy some, and how hard would you say this would be to apply to a R32 Roof, Boot, Bonnet?

When it comes to Engine internals I'm a Novice thus why I'm Asking, when it comes to reliability of a standard over a metal head gasket I don't know much differences, If its effective to just buy a Standard Gasket, and it will hold up I may just do that, just exploring the options of if I use a Metal Head Gasket what I'd be looking for.

Well I Was Intending to Deck and Acid Wash the Head, well I've got it off, not just planning to slap one on, I figured would be more reliable with a Metal Head Gasket, The Car is purely Track Only For Drift.

So Basically I got a Salvage R33 of the Auctions to transplant the RB25DET into my R32, However I got unlucky and it turns out the Head Gasket is Blown, so obviously I need a new Head Gasket, rather then getting standard I figure I may as well get a Metal Head Gasket Straight up, Problem is I'm not to sure what to get. Motor is a Standard S2 RB25DET, at this point I don't plan on changing and of the internals, if anything in the Future I may put in some Cams but that's about it, Turbo Wise I'll either be running my HKS 25/30 or a TD0620G , aiming for a power figure around 230-260RWKW. I'm not to sure what the Standard Bore is on 25, I'm thinking it's like 86mm or 87mm , So I did some searching on ebay and I found these Tomei ones TOMEI NISSAN RB25DET METAL HEAD GASKET 87MM BORE 1.2MM They also offer them in 88M BORE and in 1.5MM and 1.8MM Thickness, what sizes should I be looking for, also these are priced around $300 , is this a Good price or can someone tell me where I else I could buy one. Thanks for any help guys,

Do You have a Part No. for the Injectors, because last time I checked pretty sure Denso doesn't make 600cc Side Feed Injectors, and with the picture its still hard to tell what these are.

Emanage Still Available

Coilovers Sold.

Sent you a PM THR34T

What Suburb are you located in, may be keen to come check these out if its not to far from me.

For Sale I Have a Full set of Tein HA Coilovers for R32 Gtst, Condition is used, but they have no knocks, no leaks, besides looking a lil worn they are in Excellent condition, only reason I'm selling is because I've taken my R32 offroad, making it track only and upgraded to PoweredByMax Coilovers for the Track. Used these well car was on the street and they where a great ride, awesome Coilovers. $750 Ono. Coilovers Pic 1 Coilovers Pic 2 Next I Have a Greedy Emanage Blue, had this is my R32, comes with the Loom Harness so can plug n play without cutting any wires, Current Tune is for Stock R32 Gtst with 3inch Exhaust, FMIC, pretty basic set up for good fuel eco , $300 Ono Greedy Emanage Blue Pic Also For Sale is My R32 Gtst Seats, Front Driver and Passenger as well as Top and Bottom Back Seats, Still in great condition, no Rips, Tears, Burns or Major Stains, with a good steam clean would look brand new. $50 For the Drivers Seat $50 For the Passenger Seat $50 For Back Top/Bottom Seats Or Take Them All for $100 Front Drivers Seat Front Passenger Seat Rear Top Seat Rear Bottom Seat All Items Are Located in Melbourne Western Suburbs , Taylors Lakes 3038.

Would you be willing to sell your seats separate?

Location/Price?

First thing to get into your head is that its not just $500, you can get a standard wet kit for around that price, obviously get a wet kit, However that is just the basic kit that if you run on its own, well your most likely going to blow shit up. Your going to spend at least another 500-1000 on NEEDED accessories, such as Bottle Warmer, Purge Kit, then you need a rpm controller so that your nos is automatically injected between certain rpm. If you don't want to break stuff except to spend at least a good 1.2k maybe less given the dollar, when I got my stuff dollar was a a lot lower so. This is a good site to get stuff from http://www.dynotunen...pts/default.asp Obviously for a kit you can get something like a Sniper Kit off ebay and save $100 on shipping from the states.

Not to put a downer on your thread but you can get these for around $250 on ebay brand new.

Just Wondering if a R33 Power Steering Rack Will Fit into a R32?

.. Yea no idea how I missed that DOH!

So is it a Auto or Manual Box ??

Do you have Reverse Lights for the Rear Bar Around?

Do you Have Rear Bar Reverse Lights?