EXP19

next to it is a mr turbo 76gts rated at around 1150hp the gt47 is an 88mm turbo im looking at stepping up2 a 91mm billet turbo

Hey looking at selling my Garrett GT47 turbo its a genuine Garrett GT47R if you dont know these turbos then its a DBB turbo thats oil only, no water lines needed it runs a T6 0.96AR rear housing turbo has done a couple passes down the strip in the states but its in as new, perfect condition reason for selling is going a bigger setup this turbo is rated at roughly 1500hp been advised that the turbo should make 20lb+ boost at around 5200rpm on the 3lt, slightly later on a 2.6lt $3000 DELIVERED!! cheers Troy 0433 118251 [email protected]

is this still available? if so, can i get pics to [email protected] thanks cheers Troy

very nice mate! sorry, just reread and you say that you have everything to make it look like it did before so im assuming that means the whole widebody kit? cheers Troy

which version software? how long was it used? what was it running on? autotune? setup for high or low impedance injectors? 1bar or 4.4bar map sensor? are the water and air temp sensors included? pc cable? manual?

this thread is hilarious!! you have most of the nissan hating the 2J saying the 26 is better you have some nissan guys respecting the 2J knowing it is superior to the 26 $ for $, the 2J will always come out on top of the 26 strokers, built bottomends, everything the 2J will always make more power and torque im sure that if you put the 2J into the gtr and kept 4wd then it would sh1t all over anything!! its something im looking at doing in the near future but not to a 34, prob a 33 a 3.4lt 2J with a 88-90mm turbo 4wd GTR would be 1 awesome car!! also, as to power output, the 2J lives easily on 800rwhp on std internals im currently building a 2J for my VL but with a built head and bottomend every1 knows that the 2j is better also, i love the conversion, its different but it could have been done alot better!!

very interesting figures there also note that the 2J has a lift of 8.61/8.79mm while the 26 im pretty sure is only 8.1/8.2mm?? also, a guy in the the states flowed the 2J and 1J heads and got significantly higher figures than that!! was done at 400lift (10.16mm) but not sure at what inches of water it was done at tho his figures read: std 2J as follows 238@400lift intake 154@400lift exhaust std 1J 215@400 intake 133@400 exhaust your 2J figures give a percentage of 87% while his gives 64.7% granted his tests are done at alot more lift which will give a higher reading cheers Troy

hey im after an r33 rb25 head only need head wit covers dont need coils or ignitors dont need inlet manifold or exhaust would lik 1 asap and would prefer QLD thanks cheers Troy

this turbo is not made by masterpower all master power turbos are branded wit master power in the compressor cover and also the exhaust housing i know cause ive had 2 of these turbos and several master power turbos and this turbo is nowhere near the quality of a masterpower turbo!! yes this turbo is from xspower in the states which go under teh name ssautochrome on http://www.ebay.com heres a link to there store with these turbos http://stores.ebay.com/WWW-SSAUTOCHROME-CO...sQ3amesstQQtZkm search thru there n u will find some real cheap stuff but as the saying goes,u get what u pay for ive bought several gates and turbos from these guys but hav since been resold and 1 gate was stolen ive now bought there 46mm jdm gate which seems alot beta quality but we will c it has been posted on forums in america that they (ssautochrome) sell the lower end gear on ebay as thats what sells just b careful if u buy these turbos, as people hav said, they are using them and they r going great and the dodgy turbo is the t3/t4 that they sell

would u sell just the microtech? if so, how much? cheers Troy

hey mate what price where u after? wot condition they in? cheers Troy

Hey im still after soem covers for the rb26 head i need the cam covers, coil cover and teh front cam belt cover cheers Troy

both are electric and pull start havent ridden the chopper so dont know if it changes gears but teh road bike is auto n only seems to hav 1 gear i weigh a bit ova 80kgs n the road bike gets me movin!!

u could ride the chopper id say but not the road bike ride them round your property or on teh road or woteva but if u get caught u can b fined or sumthin they hav races all the time out parklands now 2 must sell these!! there goin in the trader this week

pics up the roadbike hasnt got its visor or any stickers on it yet there all still here in there plactic need to sell make offers cheers Troy

ill get pics up 2moro cheers Troy

Hey got 2 pocket bikes for sale 1xChrome Chopper 2 stroke 49cc, neva ridden!! $600 1xRed Road Bike 2 stroke 49cc, ridden bout 5 times $500 Both excellent condition, choppper is brand new must sell located on the Gold Coast cheers Troy [email protected] 0433118251

Hey gotta sell my gear asap!! ive got: RB26 head from 32GTR, complete valvetrain including cams also comes wit coils doesnt hav cam gears, ignitor or covers $1000 twin td06 manifold (1 high, 1 low and 1 wastegate flange) $400 Custom CP Forged pistons suit rb36/30 and pin size to suit chev 327 6" SJ rods $1200 BRAND NEW STILL IN BOX has pins n rings 3SGTE Turbos manifold $100 CT26toT3 Adaptor $50 7MGE injectors x 6 $100 must sell the lot located on the Gold Coast cheers Troy [email protected] 0433118251

hey im after a S1 RB25 Turbo asap im on the gold coast cheers Troy

Hey im after the stock rb26 cam belt cover and the cam covers n ignitor cover also after n ignitor (is there only 1) thanks cheers Troy

pics up must sell!!

hey must sell this manifold asap its in great condition will get pics soon twin td06 manifold (1 high, 1 low and 1 wastegate flange) must sell want $400 for it cheers Troy

hey im after a microtech ecu or similar lik haltech or wolf needs to b a 6cyl version, prefer rb series aswell hav cash waiting cheers Troy im on the gold coast

Hey ive got my 30DET plates for sale neva been on a car there QLD plates, tropical background wit slimline front want $500 for them already been fu cheers Troy

need 2 sell asap! cheers Troy will swap for a 6cyl microtech mt8/lt8 wit loom wit cash adjustment (i know its a long shot)