Spinning

Thanks guys! Any one interested in buying a 20g 8cm set up so I can purchase the 25g

I've been scrolling through alot of the pages in this thread and couldn't find many people using the TD06H 25g at all. I've been trying to read up on them for a few weeks now. I have a Rb25/30 that is just a slap together engine pretty much that I had tuned with a Kinugawa td06sl2 20g 8cm. Although it has pretty much instant boost, it lacks of go up around 5000 RPM, I normally don't rev it past 6000RPM. It also wasn't making any more power above 16psi (304rwhp) with a 38mm External waste gate welded to the rear housing. I drive the car atleast 3 times a week on the street, Gymkhanas, Time Attack and Drifting. Im not really after alot of lag. What I want to know is how Responsive will a H 25g 10cm be, Will it make full boost by atleast 4000RPM? Does any one have any experience with these on a RB25 or Rb25/30? Dyno sheets? I'd love to hear your experiences!

Bring up a thread from the dead! I have the exact same problem except injectors 2,4 and 6 have no pulse but have power. Did you ever resolve this problem!?!?!

I'm using the rb20 loom because it's the simplest way of going about it, I'm not running vct and I'm using all the rb20 sensors. I've previously had the ecu(nistune) tuned with my rb20 before it decided it wanted to die. I forgot to ad it's in a r32 if you Havn't already guessed. Ahhh okay, on the diagrams I can find the rb20 computer only has 3 injector grounds. I'll have another look tonight after work and see if I can solve it. Thanks guys..

I have a problem and was wondering if any one could help me out please! Injectors 2,4 and 6 do not have injector pulse. 1,3 and 5 do and are fine. All 6 injectors have power. I've checked the 3 ground wires at the ecu and are all reading they are earthed. I've gone around the engine bay and double/triple checked earth points. I can only see the problem as a bad earth problem but would like some feed back. The engine is a Rb25/30 using a rb20 loom and ecu(nistune), also using all rb20 components. The engine is running just rough, can hold idle though. The only things I don't have plumbed in is the intercooler/pipes and the afm. Help would be greatly appreciated!

Okay, thanks man Ill definatley let yous know!

Nope, just a z32 AFM.

Hey guys, so I picked up a cheap Plazmaman FFP the other day. It runs the stock throttle body and IACV, my question is would the airflow change so much that it will affect my tune? Do you think I'll have to get it tuned again? Its on a Rb20det, td06 blah blah blah. Just thought Id ask here and see what yous all think before I contact the Guy that tunes my car.

Stock Rb20det Engine Nisstune Kinugawa TD06-20g Sl2 8cm Anti surge 38mm tial external waste gate welded to a flange off the Rear housing Stock exhaust & Intake manifold 600cc injectors 255lph Fuel Pump z32 AFM Front mount & 3" exhaust 220Rwkw on 18psi

Wanted ASAP R32 GTST bonnet latch and bracket! Northside of Brisbane.

Hey guys, so The bad storm In SE QLD Hit my Car hard with bad hail. My GTR bonnet is now Full of dints. I dont have anough money at the moment to buy another GTR Bonnet and have been reading people chop Gtst Bonnets to replicate a GTR Bonnet. Just wondering if any of yous have done it before, Before I go ahead and have ago my self. Ive searched this before and havn't found much info on it.

Hey guys, My R32 goes in for a tune on friday. Im hopefully looking to get atleast 300rwhp. What do you's think would be an estimate of what im going to make. The mods are - Stock Rb20det Td06-20g 8cm sl2 v band on stock exhaust manifold 38mm Tial External Gate 18 pound boost 550cc injectors 255lph fuel pump z32 afm Nisstune.

Thanks man! Really appreciate it!

Hey guys, I'm new to welding and just wanted to ask a few questions. I have a mig at home and was wondering what thickness steel people use for intercooler pipes and what thickness for exhaust? Thanks guys!

No I havnt actually done a pressure test haha, Ill end up having a play around next week end and see how it gos!