methz

Decided its time to sell my car as i don't really use it anymore and its a waste just sitting in the shed. Ive owned the car for over 10yrs , imported back in 2007. Car has been on e85 for about 4yrs. Rb25det 155,xxx kms camtech 272 cams (retains vct) supertech valves and titanium retainers valve guides were done and stem seals few months ago cosworth mls head gasket arp head studs 1000cc bosch injectors with top feed rail speedflow inline fuel filter with walbro 455lph intank pump Link Flex fuel sensor Vipec V88 plugin ecu t67-25g .73 turbine 3" dumpipe to full 3.5" custom exhaust with rear 3.5" inlet muffler steampipe exhaust manifold with 50mm wastegate plumbed in freddy intake with stock TB thats been powder coated and skimmed years ago 50mm blow off valve custom catch can in corner of engine bay with speedflow lines eboost street boost controller runs 23psi JD built Jatco box with all the fruit. will handle over 800hp full manualized reverse pattern box TCE 3k 8inch Converter biggest B&M oil cooler they got with speedflow lines custom 1piece tailshaft b&m stealth shifter autometer trans temp gauge 18x9.5 fronts and 18x10.5 rears all good tread. carbon fibre boot lip Dont have any interior photos on this pc, but its pretty clean/tidy no rips tears and all really good condition. Car makes around 470hp at wheels on 23psi, feels really quick with the auto. it has been garaged the whole time ive owned car, paint isnt the best but still scrubs up alrite, few marks on front bar and rear has a scratch. going to start at 15k but feel free to throw me an offer if anyone is interested. and i dont care if u can get one for 6k or cheaper then go buy that one

bump still for sale guys price drop $530

Turbosmart ProGate Lite Up for sale is my Turbosmart 50mm progate lite It's brand new and purchased before christmas 2016, was going to trade out my china junk gate for this but unfortunately i need the funds now. Purchased from golebysparts in toowoomba QLD for $650 Gate was fitted with 2 springs to equal 21psi gate pressure, If new buyer wants to run lower boost, just remove 1 spring and that will bring it down to 14psi. Can post anywhere in aus at buyers expense with registered post/express. Comes with all flanges fittings etc to fit up to your 6boost etc.. Asking $580

I run camtech 272 9mm lift while retaining vct still, picked up about 45hp over stock cams and didnt shift the rpm too much as i kept the vct still... but it isnt a cheap upgrade bit over 2k, prob find cheaper upgrades to gain 50hp..

6boost warranty is useless anyway, my tuner had a car with a heat wrapped 6boost, it crystalized and cracked and rusted and basically fell apart, kyle didn't want to know about it.

used for 50kms then switched to 3.5" exhaust so no longer needed can post buyers expense in box rdy to go. $40

ive been running one for around 3yrs or so 510rwhp with manual now running built auto with 450hp with same manifold seems fine. wouldnt hurt to get surface faced for perfect seal. mines a tiny bit leaky but cant be bothered removing it.

its not a drag car, its a normal r32 with aircon and stock interior. he drives it to work most days. just a built rb25 with a glide. not hard 2 run 9s with right combo.

I got a mate who uses one of the recent ones, makes well over 600hp thru a glide and has run 9.8s at 143mph, daily driven car also. think its been on car for around 2years or so

Im the same ive always run my wastegate pressure from intake manifold, never had any dramas. i think every car i know runs this setup also.

sorry item has been sold.

greddy profec b electronic boost controller removed from car today, working perfectly fine. only reason for removely is using boost control thru vipec ecu now, tuner request's. was running around 28psi on high setting, and 18 on low setting, but u can set to whatever boost setting u would like. comes with solenoid box and all wiring to get you going. $120 can post or deliver brisbane area 0434582974

havent used an intake temp sensor since day one haha. car goes to powerplay twice a year, plus test n tunes , has been like this for over 5yrs so the intake temps must not be 2 bad

i was making 510rwhp fine with a 7yr old china cooler from ebay , still have it on car actually.

it doesnt sit too bad, my car sits pretty low all round and i had no dramas, it was tucked up as far as it could go. hope that helps