Jump to content
SAU Community

TimmyMA70

Members
 View Profile  See their activity

  • Posts

    338

  • Joined

  • Last visited

  • Days Won

    5

  • Feedback

    0%

 Content Type 

Everything posted by TimmyMA70

  1. TimmyMA70
    I've got some videos on the GoPro I haven't gone through yet. Although my wife came down with me and took a heap of videos which I'll upload today at some stage ?
  2. TimmyMA70
    I did a best of a 14.17 on this occasion. I believe a high 13 would be possible, taking into consideration: - hot day - fresh setup and not alot of opportunities to practice launching - not really setup for the drags - a better driver, being fresh, I was pussy footing the launch a tad. I won zero kebabs as not hectic enough Uleh.
  3. TimmyMA70
    So this happened.. decided to go and do a run down the strip yesterday. See what it'd do.
  4. TimmyMA70
    Thankyou very much mate!! Appreciate you taking the time to read it ?
  5. TimmyMA70
    Have done 1000kms in total (untuned and tuned) since the engine went in, so wanted to do an oil/filter change too. Threw a spanner over a heap of things to double/triple check everything. It's all looking pretty good though! I'm just enjoying being able to drive it, honestly.
  6. TimmyMA70
    I really think so too! It won't be for a while. I plan on enjoying what I've got here, I'd like to do some track days in the new year and maybe a couple of runs down the 1/4 before Xmas. We shall see though ?
  7. TimmyMA70
    Goal of 150 - 160ish on Benchmark Solutions dyno I think would be somewhat realistic. Depending on a few factors, final compression ratio will dictate fuel I'll be running. Ultimately I'd prefer 98 for simplicity, however I'm not against the corn juice. I have alot of mates asking me, egging me on to go turbo, a few things hold me back there. Driveline is #1 these gearboxes are ordinary at best when it comes to turbo torque, there is a couple of bandaid fixes, although nothing I'm that interested in. Emissions is #2 I really wanted this to fly under the radar, hence N/A, slightly lowered, understated outside. When I add a FMIC, turbo choo choo's etc it makes it stand out a little more. N/A screamer #3 it's a passion of mine too. I like the challenge of having no forced induction to rely on to make power, there is nothing quiet like the sound of an N/A car at 8k too. I recently had a mate drive the N14, before it was tuned. He's all about forced induction. He said to me, this thing doesn't need a turbo man. It's so well balanced in power/weight and also the perfect mix of street/track setup. That came from a guy who turbos everything he owns and also before it was tuned, so no big revs.
  8. TimmyMA70
    I was probably 'hoping' since my crank is only driving the alternator that it would free up another few kw. However the thing absolutely hammers. It isn't scary fast, obviously. However the power vs chassis is very well balanced. I do have another engine in the pipeline with alot more compression, larger cams, alot of head work etc etc. So we'll see how that progresses. I'll enjoy this over the next 9 - 12 months before I finish the other engine ?
  9. TimmyMA70
    The video does the sound absolutely no justice at all! That intake sound was making my chest vibrate. Was probably the best moment I've had with my cars, seeing it being revved like it should on the dyno and being able to actually hear it only 3m away. The way the car drives now, it feels alot more powerful than the 132kw the dyno says... maybe I'm just butthurt from the final figure? ?? A 1/4 mile trap speed should clear up the power figure a little better anyhow ?
  10. TimmyMA70
    I'll just leave these here. Unfortunately I had to work when the tune was finalised, however Benny did do a baseline run for me when I was there. Made sure everything was safe, which it was and ran it up. It was 124fwkw when I took it to him. So this is the final result. 20191202_162709_1.mp4
  11. TimmyMA70
    Basically it helps the rear end hang on through a corner, prevent the back end over taking the front lol. Thanks man!!! Update: car is at the tuners now And a Skyline for all you SAU Junkies
  12. TimmyMA70
    Thank you very much! The outside of the car definitely isn't the best. However that's never been my strong suit either. I'm planning to have a small amount of paint and panel done in the new year, although I'm not going all out, as the car will be used, not a trailer queen / garage ornament.
  13. TimmyMA70
    Lastly, the engine bay is about as good as I can do. So that's it. I'll call it finished under there. It's ready for a tune, this coming Monday and I'm pretty excited about it. ?
  14. TimmyMA70
    While it was up on the hoist, I figured I'd take a few snaps of the exhaust.
  15. TimmyMA70
    Had to slightly modify the front cross member to allow extra clearance for the 4-1 headers. After that, finally drove the thing!! Obviously light load, watching AFR's like a hawk. Drove it down to a mates shop where I did a wheel alignment.. for the street. For now..
  16. TimmyMA70
    Interior is back together on the N14 ?
  17. TimmyMA70
    It's all but booked in ? only need to confirm the date with the tuner.
  18. TimmyMA70
    Yeah it's worked quiet well, spoiler alert... the car is currently driving ? I've been slack updating this. Untuned, however AFR's look excellent. Haven't given it a decent rev, obviously, however I'd be happy to cruise on the highway with it. Drives surprisingly well for a map, which isn't even 'SR20 Specific' The dyno is less than 100kms from me.
  19. TimmyMA70
    Since the car has been off the road for so long, the brake rotors had began rust. So gave them some love in the bead blaster and scuffed the brake pads up (figure 8's on a sheet of 80 grit) Flushed and bled all the brakes, for good measure. It's getting alot closer to driving it now!
  20. TimmyMA70
    A bit of an update for you guys. Exhaust tip has been decided. Went with the 3" straight and happy about it ?
  21. TimmyMA70
    I am from Newcastle ? Hahahah!!! Thanks so much man! That means more than you can imagine actually dude. Especially with all the awesome GTR's on here!! ? Hmmm. Not sure! Apparently Pulsar > GTR ??
  22. TimmyMA70
    I have spent alot of time on dirt bikes. Alot of fun, very under rated. Your shed sounds like a wet dream
  23. TimmyMA70
    Mig is pretty good, quiet universal and somewhat easy to use, the hardest thing is setting them up. Most guys just set them up by the sound. Yeah perfect. They don't offer the 'trade - n - go gas' at my local Bunnings, so Gasweld/Sydney tools are the go-to for me.
  24. TimmyMA70
    That's pretty awesome you were gifted a welder dude. Is it a mig or tig? Assuming it isn't a stick welder if you need gas. Gas is pretty good these days. I just 'bought' a bottle. So I own one, no rent. Then just pay for the gas when I swap it over.
  25. TimmyMA70
    Hmm, we shall see Oh, also in regards to your previous post, the fab work has taken some time, that's for sure. It definitely wouldn't be on the front page of 'weld porn' however it is stuck together ?
×
×
  • Create New...