Jump to content
SAU Community

Trav1991

Members
  • Posts

    20
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by Trav1991

  1. Hacked by the one and only

  2. Layin on the couch because I feel like crap and have no energy

  3. finaly got a woirkin temp gauge in my car its about time

  4. Im sorry for leaving it so long do u still have the gt3076
  5. im in adelaide
  6. hi i am looking for some parts for a rb 25 det the parts i am looking for are: -rb 25 or rb 20 high mount turbo manifold -rb 25 or 20 turbo exaust studs -rb 30 turbo oil lines -piggie back ecu -rb 25 wiring loom -rb 25 cam angle sensor -r 33 brake callipers & disks -t04 turbo -plumb back bov -rb 25 valley cover if you have any of these parts please let me know post a price and a let me know what condition (prefer a pic) thenks
  7. it would be a big help if not ill be able to get them somewhere
  8. im happy with that it sounds good are you goin to send the bolts with it aswell
  9. yeh thats the ones say 30 plus delivery to sa
  10. do u have the plate that holds down the coil packs by any chance
  11. how much for 6 injectors and the turbo drain pipe and can u post to sa
  12. how much do u want for the 25 ecu and can u post to sa
  13. do u still have the series 2 ecu and engine loom
  14. w2ould u sell the ecu for $50 and can u post to se at beyers expence
  15. hi im from sa looking for a good cheap standard rb 25 exaust cam could anyone help me out please
  16. ill thake the exaust cam if you can post to sa
  17. any chance of getting the exaust cam dilivered to sa
  18. would it be pasable to get the exaust cam out of the r33 if so would u sell it for 100
  19. need to sell an RB25DE block and bottem end (NO SUMP) bought as a hole engine using the top on my 31 the engine was out of a r33 awd thet had done 70,000 km the block is in good condition lookes like its been serviced well there is no burnt oil or biuld up of gunk inside the engine. looking for about 300 but negosiable need it gone ASAP
  20. have you rechecked the head bolt tention when you rebuild a motor u should check the head bolts about 3 times in about 10,000
  21. there is no point in oversizing the crank inless you are putting a crank with a longer stroke in and as for the standard size it doesnt matter if you use stock ar aftermarket just after market have higher hp and torque ratings if you want 500 go after market i think the bottem end is rated to about 400 hp
  22. it sounds like wrong ring gape or have a look at the tops of the pistons and valves for any imperfections or damage the only other thing ive seen that does that is in my ute it was the same and it was because it overheated and the dores got sistorted
  23. would u take 350 for the engine
×
×
  • Create New...