_Ryan_

Seconded, I've seen it before too. Should be in general car chat or wasteland?

practicality

car is ready, but I CBF going up, and its for sale.

privacy laws? I think if the police requested them they would release them to the police(waits for admin)

huge, huge, barge, old.

Find me a good one...

the front seat was most if not all of the way back it think Same as any domestic car for a P plater, heaps better excess than my skyline. boot space on a new VE is a joke. can't compare space on new cars to old. if you want interior space, buy something old!

RE001 is not a semi, it is a normal high end street tyre, the RE11 is their 180 tread wear semi style street tyre. please get your facts correct. I am running RE001's on my Stagea.

Shakiel lives out that way , workshop just off the dandy bypass exit of eastlink, so wouldn't take you too long I think? Shakiel- contact details are on www.feeninpeformance.com.au have seen a couple of supras there

Hey all. Yes this is Abu's old car, it was imported for Abu by his cousin Shakiel of Feenin Performance, it then went to another owner then to me. Wedding is getting closer so the toy has to go... I bought it in June, have spend a bit on it fixing a few things(needed TPS, oxy sensor etc), added a few things it needed- front camber kit, KU36's, Worked on the set up- raised it to a good height, good alignment, got an alarm, ditched the "showy cage" and put in GTR rear seats to complete the interior. Also got rid of the silly cannon from the rear So it brings me much pain to present my car: Engine: RB20DET, 143,500km, just serviced with Penrite HPR10(10w50), Ryco filter, NGK BCPR6ES plugs. HKS Cam Gears (Intake and Ex) HKS 2535 Turbo HKS Wastegate Actuator GTR Injectors GTR Blow off Valve Bosch 044 Fuel Pump Blitz Turn Flow LM intercooler Stock airbox with new panel Z32 Air Flow Meter Re-mapped ECU 5 puk exedy cushion button clutch Exhaust: HKS Split Dump pipe HKS Front Pipe Apexi EVC Full Stainless Cat back Straight Through 3" Exhaust, Magnaflow rear muffler.(also have the cannon rear section that came on the car) Suspension: Tein Type-Flex F: 6kg R: 5kg Damper adjustable, Height adjustable. Whiteline front camber kit (2000km old, KCA336, currently running -2deg) Tie rod spacers Kazama Front Castor Rods Whiteline Hicas Lock with modified Power Steering pump ISC Rear camber arms Cusco Mechanical LSD (2way) Power-steering removed. Wheels: R33 GTR (17x9+30 235/45/17 Kumho KU36) Braking: EBC Green Stuff - Front EBC Black Stuff - Rear Interior: R33 GTR S1 Bucket Seats(front) R32 GTR rear seats R32 GTR rear trims Nismo Leather Shift knob Factory Skyline Floormatts Safety21 7 Point roll cage, Plus harness bar has been installed, Car has retained all its interior trimmings Drift Button Exterior: Genuine N1 GTR Front Bar Type-M skirts Type-M rear bar Standard Bonnet Shaved boot Audio: JVC KD-G825 with iPod kit Clarion splits(tweeters are mounted in the door) Rego- Nov 7th next year(I just renewed it). Alarm- Fitted, high end, under warranty, receipt provided. The powersteering has been removed, reco'd rack has been solid mounted, feels good to drive, can provide all parts required to fit it. I also have an EBC I haven't used, HKS EVC IV, can throw that in. install the EBC, get a retune, hello 220-240rwkw depending how much boost you would like to run! This is my weekend car, I get the train to work, It gets driven out to lunch up the hills/down the coast etc on nice days with the Mrs, I attempted to take it to a DECA but broke a stud that morning, have since replaced all rear studs. Take advantage of my loss... I bought the car 6months ago, tidied it up, and now am selling it! Price: 14,000. Less minus GTR seats. Less minus GTR wheels. those are the only two things I would remove to lower price. If i don't get the asking price I will part out the car. This car DOES NOT have any chassis holes cut for FMIC, parcel shelf for speakers etc. It is getting harder to find a straight 32, this is an honest car, yes the front lip needs respraying(i refuse to use cans as the previous owner did), But there are some shocking cars out there, I have been looking with a mate who only wants to spend 10ish are they are TRASH. You get what you pay for. Contact: Ryan PM or e-mail via the link on my profile. Photos to come.

who are "geelong underground drifters" or whatever. was down visiting partners family last weekend, and a black 32 and s13 with GUD and "geelong underground drifters" stickers on there cars were driving like tools. pretty sure any car can skate first in a straight line in the wet, dont think it needs to be done in traffic.

Start here http://www.skylinesaustralia.com/forums/in...t&p=1117179

And not support SAU-VIC?

I meant about a certain members posts.

gps speedo ftw or http://www.miata.net/garage/tirecalc.html

235/45 on my 9", but the rims protector doesn't quite protect it due to angle, not a stretched fitment by any means. so 25mm wider rim, 25mm tyre? = 260mm, I would probably go the 265, 255 would end up starting to look stretched IMO, but that is a guess and there would be better people to comment. In the tyres I use I wouldn't have a choice, KU36 on a 17x10 I would have a 255, as these are the choices:(from kumho website) 18x10 they would have a 265 not a 255 245/40 R17 255/40 R17 275/40 R17 245/35 R18 XL 265/35 R18 XL 275/35 R18 XL So you might want to check what sizes are available if you are set on a specific tyre.

Lucky most kinders are done for the holiday break so he will only hurt himself!

First Rye, now this post, I wonder what next...

Weber's or quads? either way the sound would be worth it

True, I agree, but on the other hand the stickers aren't much, put the payment through with the renewal. Membership prices have stayed the same for a while IIRC, So they club has to cover costs from somewhere. My opinion. If I have bought a new car and need new stickers, surely $5 on top of a new car isn't going to kill me.

Dude, its not rocket science. Don't break the pretty (mostly)simple laws, don't get fines. Get fines, pay them(if you can't, get a payment plan), Don't pay the fines, get clamped.

replace hot dog with a proper muffler or add another muffler and keep the hot dog depending on space? lots of info in the stickied EPA/RWC thread...

yay google Revzone Auto Tuning Centre maps.google.com.au 8-10 Molan St Ringwood VIC 3134 (03) 9870 0540 http://www.revzone.com.au/

needs to be under 90db. what is your current set up? do you have any proper oval mufflers?

certain magna ones work, and are around 90$... waits for Nisskid