jay-rod
-
Posts
524 -
Joined
-
Last visited
-
Feedback
0%
jay-rod's Achievements
-
jay-rod changed their profile photo -
Is 320kw for a unopened Rb25 Neo to much ?
jay-rod replied to ruinned's topic in Engines & Forced Induction
Had ~320kw for about 2 years hard abuse Now have ~380kw , with ARP studs. Unopened Neo Only thing i have broken is gearboxes over the years. -
Yeh was great having a town with 85 Everyone knew that albany had 85 in prep for racewars. ( maybe the sponsorship from united helped make that possible ? ) But i think i get about ~300-350 on normal driving in perth.
-
My 25det neo with ~380 kw to wheel Driving from perth to albany, i got about 450 km to a tank, on the light, maybe could have squeezed another 10 or so ks out of it. No narrowband or wideband hooked into ecu/tune. I think thats pretty good haha.
-
I have not got the car back yet, so i didnt ask about the iat's. Was going to do some pressure drop testing after racewars.
-
Rb25 Turbo Upgrade, All Dyno Results
jay-rod replied to Nacho Vidal's topic in Engines & Forced Induction
"D1 stable" exhaust manifold, essentially a "cheap" steam pipe manifold from what i can tell, 50 mm turbosmart wastegate off the manifold Madcat intake manifold, essentially a high quality china manifold ( it may even be made in aus ) ( really really good welds ) China spec intercooler,( just jap cooling pro i think ) but with high quality stainless pipe work done.( i will be testing pressure drop next month ) ( manifolds would not be making any more power than stock ones, if anything they hurt response.) ( i had 444 hp with stock manifolds with a atr43ss2 ) -
So got this, not as much as i hoped, but im sure there is some way to tweak it a little Have a few ideas
-
Rb25 Turbo Upgrade, All Dyno Results
jay-rod replied to Nacho Vidal's topic in Engines & Forced Induction
ATR45SAT BB Walbro 460 1000cc E85 ~22 psi peak m2000 adaptronic Unopened neo engine -
Tuning starts on sunday, should have hopefully some power runs done this week.
-
Could the stock damper in a 34 be ok to keep then? Because the 34 has an extra damper that the non neos dont have.
-
Well....that sucks. Thanks for the tip.
-
Will be moving to a new ATR45SAT Ball Bearing soon. Will put results up here once dynoed. Below is what im going from -> to. ATR43SS2+ gate off housing - > ATR45SAT BB Stock ExhaustMani - > D2 Stable High Mount + Gate of mani 44mm Tial Gate - > 50mm Turbosmart Gate Stock Plenum - > Custom FFP + Sard Fuel Reg Single 460 Walbro - > Probably Surge tank Nistune ECU - > Adaptronic ECU +Wideband/Airtemp sensor Z32 AFM - > MAP inside adaptronic E85 - > Still E85 Stock Head - > Only doing ARP headbolts And a bunch of other random stuff Was ~450 hp at the rears - > Hoping for + 550 hp at the rears Current full boost is around 3800 @ 20-21 psi Im hoping for similar response, looks like it will be close.
-
Has engine protection ever actually "protected" a engine from failure though? Referring to adaptronic/haltech and such. My thoughts would be....it would be to late anyway...maybe it could stop "major" damage but at that point...you should know already lol I guess it depends on the point of "failure" Fyi, im at about 440hp atw with z32 afm Pretty sure it can do over 500hp with a correct afm
