RBC33

That's awesome man. Good to hear that at least one laurel had come off the road and managed to get back on it haha

Holy feck whered you find that on yahoo danny. Shits cool!

I just mocked up my r32 rad and shroud in my c33. Can confirm r32 rad and shroud work with 25 and 25 clutch fan

Thats not s13 suspension then. im Running s13 drift works cs2 coilovers in my c33. Bolted up fine. And stock s13 struts should be shorter than c33. S14 struts are longer than s13. You might have been sold s14 struts?

Yeah but you'll get hassled for using a harness on the street vs a recaro adr approved fixed back. Hell my mod plater just out approved type fixed back and traffic branch of qld police pulled me over and didnt say anything once I whipped out my cert

I ran a bride zeta 3 fixed back in my civic. Apart from under brakes, dont need to brace yourself under cornering conditions. Actually made me take corners harder cause I realised it was me moving around not my car being unstable. Best mod ever

So my 16 x 9 +25 reverse meshies came Then got told we had to take 3 weeks holidays over christmas, so that sealed the deal for me to attempt my first spray job. But before i could start i decided I'd order a guard roller off ebay being cheap at 80 bucks and give it a crack, wanting to do it before i sprayed so i avoided cracking of paint. So guard started like this And i ended up getting very carried away and went from rolling, to mashing my inner guard skin out with a hammer and just cranking on the roller to pump the guards. Not perfect, maybe borderline beginning to be verandah guards, but i'm happy with them. If i had bigger lower offset wheels i probably would of tried the magazine trick but f**k it. YOLO and shit. Will get a shot up of my spray booth *cough* wedding marquee* and the car stripped back tomorrow, So far the boot lid is off, rear lights and garnish and boot trims are out and the chrome surround from the rear window is out. Shall finish taking the chrome garnishs and door seals off tomorrow, then mask it up, fix the few rust spots below rear window and i'll start sanding this muuf**ka back in prep for primer.

They might be cst hyper zeros on the rear of that white ceff?

Whaaaaat? And its still fouling on the inner well? That shit cray haha

Arms binding is normal for knuckles. You have to get the rack moved forwards or use those offset tie rod arms but apparently they are prone to breaking. As far as fouling, lower offset wheels or spacers

What hits everywhere?? Should just cut lock stops thats it. Though ive read may hit caster rods on lock or inner well. Hammer dat shit

That sucks man. Didnt you buy this laurel after getting in an accident. You must out a target on your cars. Hopefully they pay out fast. Insurance companies can be useless

My new ssr mesh rears are x9 +25. Just dropped the car on the ground last night and they sit flush and the guards are untouched. So they will fot perfect with zero camber and a slight lip

Damn wish my missus would clean my motor Progressing well but man, you gonna go through the battery tray area for the piping??

All the laurels with all the vskfs Looks good man!

Surge or stall? I thought its stalling the compressor as the air is traveling back through the compressor wheel. I thiught compressor surge is when the turbo is surging before coming onto boost.

Oh man id piss that oil warmer off. If it shits itself youll get water and oil mixing... just get an rb30 stud for like 9 bucks from nissan and filter goes straight on or better yet oil cooler and relocation plate

Lucky I wish mine was raw. Check all your threads aswell before you go bolting it on. Mine had a few dodgy threads which I just ran a tap through. Will be a pain to get to some when its on. And if you have access to one, die grind the water jackets out a bit bigger, to match your gasket, same with your ports. I through my gasket on mine and got a paint pen to mark out the overlap and just ground it out and smoothed it so it matched the ports. Wasnt much to come off but may aswell.

Is it one of the raw look or polished look ones. im spewing, didnt realise we had a sand blasting cabinet at work or I would of blasted mine and painted it black

I made the exact same mistake dude. Apparently there are sime rails made that fit the stock holes with top feeds. Might lose a bit of midrange with the freddy but f**k it. Looks sexy haha

Should make bulk power for skids on e85

Umm I think it was about 600, that was hot and cold side and intake. Its not his lobtser back special that he usually does but still a real nice job

Thanks man, nathan from fabulous fab is king of stainless piping. And yeah thats probably a hondalyf thing. Was planning on doing the whole car midnight purple but not keen on trying to spray a metallic colour for my first so just gonna try a gloss black.

Way to much. I payed 40 for a pair of 16 x 8s from vic to qld. Packaged individually with thick card board around the front and rear lips/faces. So you'd be looking at around the $100 for a set of 4 17" wheels

Dude that's alot of equipment. If you want to stick to the skyline family Maybe you should be looking at r31 wagons