Richard GTST

RB25 oem coil cover - $20 Side mirrors switch - free

Price drop $50 for everything

RB25 oem coil cover - $40 ono great condition as per pic Side mirrors switch - $5 works 100% Both items came off a '96 Series 2 R33 Pickup Oatlands 2117 or postage for additional $

Sub is new, has never been used. It is also bridgeable. Amp used but still working 100%. Cables used but both fuses still fine. Asking $150 for the lot Pick up Oatlands 2117

Dyno printout. As you can see, plenty of meat in the mid range Car also has Alarm, immobiliser, turbo-timer, keyless entry

Spot on, just under 150,000kms No sorry it hasn't been engineered. It wouldn't be too far from being compliant, main thing would be passing the emissions test (ie compliance cat and emissions tune) Also, found the dyno sheet. It actually cracked the 280 mark. Will post when I get my scanner working... Thanks for the interest!

Purchased this Series 2 R33 stock in 2011 and have since invested a lot of time and money transforming it into nothing short of a daily street machine. The exterior and engine bay has been kept clean and simple so as not to attract too much unwanted attention. The Garrett turbo and custom camshafts have been sized to provide excellent response in the mid range with plenty of top-end power. Suspension compenents have also been upgraded to provide better traction and handling. Selling as I've been offered a company car and it's time to move on. Priced to sell. First to see will buy. $11,000 Available for inspection: Castle Hill - 9am - 5pm, Mon - Fri Oatlands - All other times Call/text Richard 0400 129 022 For insurance reasons unless a deposit is made I will be doing the driving Engine: Tuned by Unigroup Engineering - 279 rwKw on PULP98 APEXi Power FC w/ new style hand controller Genuine Garrett GTX3071R turbo Blitz Dual Solenoid Spec-R boost controller Custom camshafts (Unigroup Engineering special) Splitfire Coilpacks Plazmaman FMIC Plazmaman (Turbosmart) BOV - plumbed back Custom turbo-back exhaust (4" dump, 3" cat-back) Genuine SMB Muffler (stainless steel) w/ twin tips angle cut Suspension & Drivetrain Genuine 17" x 9" R33 GTR wheels (Federal 595 RS-R semi slicks on front) Exedy HD clutch HSD Coilovers - (full height & damper adjustment) Strut brace Front caster rods Front camber arms Rear camber arms Rear traction rods Pineapple bushes (alloy) HICAS eliminator kit Factory Nismo rear strut brace Body & Interior: Factory nismo front lip Genuine Nismo clear turn signal Aftermarket stereo unit w/ reverse camera Genuine Nismo gear knob Factory floor mats Misc: HID headlights A/C nice and cold for summer Serviced every 5000kms

bump

Photo of cams Also sound of muffler, just to give you some idea https://www.dropbox.com/s/37yxifkmyy3td8v/2014-01-08%2020.23.15.mp4

3" tailpipe to oval muffler (flanged) 3" inlet, twin tip outlet - $250 ono hangers/length suit R33 GTR/GTS/GTS-t Found this muffler to have just a respectable drone while cruising, could still easily have a conversation, however nice and loud on boost I'll post a vid showing how it sounded down the creek as well as a pic showing how it sat on the car Standard R33 RB25DET (non-NEO) inlet & exhaust camshaft - $200 ono Working 100%, A1 condition will post a couple pics shortly Pickup Mount Druitt or Girraween Contact Richard - 0421 202 823

Includes everything pictured $400 ono contact Nathan - 0451 454 703 Pick up unigroup engineering

~ sold ~

bump

Includes everything needed to bolt on, including clamps Pick up from Unigroup Engineering, Girraween or can post at buyer's expense

Yeah cut rio bar and front bar. I would budget one day max. Its pretty easy to install. The most time consuming part is cutting out your rio/front bar and test fitting until everything fits Here's a write up of one being installed on an R34 http://www.skylinesaustralia.com/forums/topic/288799-installing-return-flow-fmic

Brand new, one week later it'll look like mine anyway =P

FPR sold S2 afm still available, $50

boom $450 ono

bump

$550 ONO Core Size - 620 x 266 x 76mm Return Flow Genuine Blitz Is still on car. Will remove once sold. Will post pictures shortly Located in Blacktown area PM or call Richard 0421 202 823

R34 SMIC Sold rest still available

S1 afm SOLD

bump

Nismo Fuel Pressure Regulator $200 ono including postage Brand New, Never Used, Never Fitted. Selling as I didn't end up needing it for my setup. Fully adjustable from 28 - 85psi. It is a DIRECT bolt on upgrade ie no adapter needed and will fit sr20, rb25, and rb26 Nismo Fuel Reg Vehicle Compatibility: - Nissan Stagea Autech 260RS - Skyline - R33 GTS-t S2 - ECR33 - Skyline - R33 GTS-t S1 - ECR33 - Skyline - R32 GTR - BNR32 - Skyline - R33 GTR - BCNR33 - Skyline - R34 GTR - BNR34 - Silvia - PS13 (Red Top) - 180SX - RPS13 S2 (Black Head) - 180SX - RPS13 S1 (Red Head) - 180SX - RPS13 S3 (Black Head) More info: http://justjap.com/s...248&cat=&page=1 R34 SMIC $100 ono Perfect working order. Comes with pipe & bracket R33 S2 AFM $100 ono Perfect working order. Purchased from SSS Automotive in August 2012 and still has 3 months warranty remaining. Includes plug. R33 S1 AFM $50 ono Perfect working order. Pick up Blacktown area. Happy to post. Richard - 0421 202 823 Thanks

bump