Jump to content
SAU Community

BJM 24

Members
  • Posts

    24
  • Joined

  • Last visited

  • Feedback

    0%

Profile Fields

  • Car(s)
    r33
  • Real Name
    skyline

BJM 24's Achievements

Explorer

Explorer (4/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. Sweet thanks mate
  2. I'm looking to buy a new powersteering pump don't want a recon or 2nd handy anyone know a website/shop that sells them? I can't find any
  3. Yep but going to connect it too the passenger one in drivers side
  4. Need a wiring diagram or pin out for my window controller if anyone can help?
  5. Checked for bad earth or power? cause sensors may not be receiving enough power. Had similar problem with mine ended up earth wire.
  6. I'm in WA thanks thou guys it's running fine but I have just put the motor in the car last week. Never heard it do loud they may be aftermarket then I havnt actaully checked yet. I assumed they were broken with the loud ticking but guess not think I'm going to pull them out anyways or is their a way I can test them in the car? With out putting the car on a dyno
  7. Cause I don't want to lean my motor out
  8. Ok does anyone know if they are preventing fuel flow by ticking loudly?
  9. Constant tick. Yer I did the screw driver test too it's way louder than normal I know they tick but I can hear it from the drivers sest
  10. I have ordered new injectors from USA but going to be a few weeks. But my injectors are clicking really loudly. Just wondering is it safe to drive with out it ever leaning out? it has stock turbo on stock boost.
  11. Mines f**ked right now too the timings 60 degrees advanced. Check that it's fitted correctly cause you do have too line them up with number 1 tdc and their are two marks on the cas. I havnt ever heard that you can test them before. All I did was put a timing light on it and see we're it is. Ecu gets signal from the cas so if you try another cas and still faulty try ecu next
  12. It did but I've replaced TPS and it idles now. But now it just under power when under load
  13. It did but I've replaced TPS and it idles now. But now it just under power when under load
  14. Yer I drained that 1st. Its improving the more I run it. It idles now but still lack of power. Thinking blocked injectors as it is improving a bit. Or knock sensor is next step
  15. I have a series 1 r33 rb25det. Bought car without engine or gearbox got a half cut but has sat in my shed for 6 months. Put engine in this week and now it won't idle. It does rev good thou. Have all new plugs and replaced faulty coils. I unplugged the TPS and it makes no difference. I checked ecu codes and says no codes so cleared and tried again still nothing. So unsure what the fault is or were to go from here
×
×
  • Create New...