nltd

WTB COILOVERS TO SUITE R32 GTR LOCATED IN CANLEY HEIGHTS NSW 0426876899 - DANIEL

open to swaps

http://www.gumtree.com.au/s-ad/canley-heights/cars-vans-utes/1989-nissan-skyline-coupe-420kw-/1048279361 Hi, Unfortunately, the time has come to say goodbye to my GTR. I have been building this car over the past year and a bit, but it is time to move on. List of mods are as follows Car has been tuned on E85 in April 2014 - 422KW @ wheels Cp forged pistons Tomei poncams type B Acl gasket kit Argo rods Arp main studs Arp head studs Acl bearings Nitto oil pump Full reco head with baby cams Custom made exhaust manifold (not eBay shit) Garrett Gt35/40 with 60 mm turbo smart external waste gate screamer Greddy intake BOSCH 2200 cc injectors Power FC + remote Sard fuel regulator Greddy Turbo timer Walbro aftermarket fuel pump TIAL blowoff Splitfire Coilpacks ****many more to list, jsut cant think of it all off the top of my head Handling wise, I have Full set of HKS coilovers, will come with standard shocks and springs at the right price. Cusco front strut, also have after market rear strut. I also have a full set of ADVANS RG's which will come at the right price. I will also throw in a full set of standard r32 wheels. the negatives - The body is not a show spec body, i do drive the car. But with that said, it still looks good, just a few minor scratches here and there, it is washed every week, even though it is only driven twice a week. the interior - everything is there, the headunit however is not installed, but will come with the car. The only downside is the drivers seat has a tear, this is very common with r32 GTRs. Please feel free to arrange to meet. i work weekdays and dont get back until 7pm. so weekdays would be the best, or late on weeknights. No test pilots untill deposit is taken. Price and price conditions: $21500 Pictures: located in link Contact Details: 0426876899 - dan Location: Canley Heights, Sydney ##please note number plate is not included in sale

as advised, new or used Located in Sydney 2166 pls send photos through or text 0426876899

bump price drop $23500

hi, $25,500 ONO / SWAPS ****Car will come with 6 months rego for new owner!!***** paint is blue with some metallic flakes Cp forged pistons Tomei poncams type B Acl gasket kit Argo rods Arp main studs Arp head studs Acl bearings Nitto oil pump Full reco head with baby cams Custom made exhaust manifold (not eBay shit) Gt35/40 with 60 mm turbo smart external waste gate screamer BOSCH 2200 cc injectors POWER FC SARD fuel regulator Walbro aftermarket fuel pump TIAL blowoff full 3 inch exhaust with high flow cat im sure ive missed something.... many more parts come with the car so come have a look if you are GENUINE! turbo can handle up to 480kw internals can go way higher. If you want more power strap on a bigger turbo n ur done. my loss is ur gain. finish this car and enjoy it. why buy a stock gtr for 20k and then pump 10-15 k into work. its already been done here. get a mechanic to come look at the work if you want. do some reasearch and look up the costs of all these parts and then get a quote for labour. you will see how quickly it adds up if you do this your self notes: will come with standard wheels with rubber that needs replacing interior - driver seat is a bit torn but still ok. will come with a headunit but it is not installed. i may have missed some details but please look at the car before offering. all imperfections have been taken into consideration with this price CAR HAS BEEN TUNED ON E85 ON 15TH NOVEMBER 2013 by SMD Workshop by ZEN 412.5kwatw. papers and videos to prove. come have a look for yourself if genuinely interested. no test pilots unless deposit is taken. SMS ONLY 0426876899 OPEN TO SWAPS Rason for sale: building another car with the old man. so i would prefer either a swap with cash my way or straight cash. unless you have a rx7 series 8 then lets talk lol

bump !

HKS $950

I have a shell located in Sydney if you are interested. straight, fairly new paint with full interior. all u need is an engine.

im located in sydney if you would like one. pm me.

as advised in title. either a complete forged setup or parts to help forge a bottom end or standard block for cheap. has to be in reasonable condition. Located in NSW willing to pickup Looking into building a rb26/30

You're quite the salesman BRAPBRAPBRAPBRAP FTW. im trying to find someone to do the work for me. ive msged greg whos already done the conversion on his r31. havent received a response. i dont know many people who have dont this conversion before. anyone know of any workshops that have EXP in working with RB26 NA conversions n tuning etc?

the only reason going this way is becausei have a spare rb26 long motor at home. no one wants the long motor so i might aswell chuck it in. its missing the turbos and the sump.. which is perfect. since i dont need both. everything else is still there.

#@Anfanee how is this possible? im slightly confused. refer to this article. " The "15" Years Rule - Vehicles manufactured before 1/1/1989 The 15 Year rule was significantly altered as of 11 May 2005. Under the ammended rule if you import a vehicle which was manufactured before 1 January 1989 then it doesn't come under the SEVS ruling and does not need to be complied by a RAW. The vehicle may be imported and modified under a different set of criteria, with an engineer providing a report which demonstrates that the vehicle complies to the ADRs that were applicable at the time the vehicle was manufactured. Generally compliance for importing cars under this scheme is relatively inexpensive."

btw. how do i get in touch with these DOTARS fellas. wouldnt mind having a copy of the import approval.

you guys are awesome. thanks! we should all get together n smoke weed n hit 30psi yezzurrrrr

This may have just made my week. I have a black plate with the 17 digit vin number next to the Blue nissan manufacturers plate. I hope this is it. fingers crossed. ive just spend so much money getting the car finished if it isnt gonna be registered im gonna be spewing.

i pm'd him. hopefully he replies. im hoping to go to his workshop since he is fr sydney, and check out his work. his build showed it got 170rwkw... which isnt much. but from a FR car that weighs 1000kg and an engine that can rev over 9k. mmmmm

some compliance places ive called asked when was it built etc. and that some r32's wont require a compliance plate. this is why im asking. My compliance plate has gone missing. did not notice when i purchased car. didnt cross my mind as it was registered. its been unregistered while ive been building it and not upon getting my blue slip realised its not there. zzzz

this is a sad day. f**k.

i am reading the pre 1989 scheme for NSW. jsut want confirmation if that vin number is the model year. or the actual build date? i understand the pre 89 scheme only applies to cars built before jan 1 1989

i would honestly rather keep the Z n/a. and what better engine for it than the rb. i dont really care about the power, my gtr is there for that. Im all down for the screaming high revs bouncing off trees when i go for a drive. i think it would be better if i just na a rb26dett rather than buy a 1 of 200 autech rb26? last i heard they were goin for 6k...IF you can find one. LOL. rb26/30 na would be affordable.. jsut swap over some parts n vwoahlah. (ok maybe not that easy) but within reach. ive been trying to source a autech rb26....not happening.. =\

thats good news. btw does this mean i fall in the pre1989 rule? need to get the car blue slipped. zzz

Please help . My engine has a plate showing "Chassis no : BNR32-001455" this does not show up in the info shown in link below. http://forums.nicoclub.com/nissan-skyline-gt-r-r32-production-dates-t569684.html whats going onnnnn?

when getting it engineered to meet emissions applicable to the engine. would this also mean mods to keep structural rigidity. of course ill be getting a cage and extra struts roll bars etc but anything else ill have to watch out for in regards to chassis fabrication?