Wildanimals

PWR reconds the r34 gtt one supports 600hp at flywheel - 350kw at wheels i assume there are no bolt in fmic available for wgnc34 stagea? anyone know? also any suggestions on what size injectors or mas air flow sensor (air flow meter) i would require to achieve 300 rwkw in wgnc34 neo rb25det stagea? cheers

Hey fellas... I have a 98 WGNC34 series 2 stagea RB25DET I want an intercooler that will support 300 rwkw and will run through the factory piping any suggestions? Does the PWR R34 GTT fit? Thanks

Hey mate keen to get some of the goods, I am new on here, not sure how to pm

Cruise control was an option on R32's, it's more common on 4 doors, second hand factory cruise is awesome but very hard to find. I put factory cruise in my R32 GTR. Here's what you need to do... find a 32 with cruise.. You will need the Wiring harness that goes under the dash and into the engine bay as it is different, instrument cluster, brake switch, clutch switch, control unit, on/off switch, set/decelerate/accelerate switch, vacuum pump, vacuum reservoir, diaphragm/cable, throttle linkage and hours and hours of labour... Alternatively any aftermarket cruise will work and is easy to install, you will need a vacuum reservoir if the car is turbocharged... A speed sensor can be bought separately which bolts in between the gearbox and speedo cable, command ap 150 tends to be a good unit...

Hi guys I want to put a Sparco aftermarket steering wheel on my r32 gtr... Do I have to use a special aftermarket boss kit to make the HICAS work, because the sensor is on the back of the boss? cheers