Chris Shaw

The ECU numbers are: 23740 5L700 PCMNR-050 D1 7619 The loom is also attached to this ECU, missing only a few plugs.

Sure thing, more pictures coming asap.

Rear seats sold.

Feel free to make an offer on anything above.

I could find out some prices for you? Although the seat in my photo with the wearing is the drivers side.

For sale: A pair of R33 Skyline Headlights out of a GTST Series 1. I brought a new pair and these were what got replaced. Driver side headlight has had a crack in the plastic housing (not the clear plastic) but this has been sealed up. Nothing else is wrong with it, that's how it was when I brought the car and I replaced the headlights due to being fussy. Nothing else too major to worry about, both headlights are a little yellow, nothing a polish won't fix. I'll confirm anything else I find about them tomorrow when its daylight, including posting up some pictures. Only asking $100 for the pair, need them out of my shed! RB25DET Viscous clutch and fan $40 R33 Series 1 GTST Front and Rear seats. $50 & $40 R33 Series 1 Steering wheel $40 (One with the " S " on the middle. No air bag) (Currently taken apart in attempt to make the horn press in better, & will assemble it back completely for anyone who wants it.) What I believe to be a R34 ECU and engine loom $70 for ECU and $70 for the loom (It's missing a few plugs off the loom and I'll confirm with photos and model numbers what exact loom and ECU it is.) An R33 or R34 alternator. (No idea which one it is, I'll post up some photos.) $50 180sx crank angle sensor $50 Also have the bottom half of a RB25DET engine/block. Might keep it for now, yet won't refuse a reasonable offer. Feel free to ask any question about this, I really have no idea what I'm looking at. All my knowledge is in the top half of the engine. I'm located in Melbourne, Burwood, cash on pick up would be great. Contact me on: 0409 767 893 (Text only please as I'm at University during the week, feel free to call me during weekends at any possible hour.) Email: chris_5haw@hotmail.com or PM me on here. Also a few of these are on eBay Will swap anything above for a RB25DET stock intake plenum (must have the bottom half!) or a RB25DET cas/cam sensor, a working car head unit so I can actually have radio again, any type of turbo timer or boost controller. Or just offer me some more Skyline parts.

I'm interested, have you still got any of it? Can come pick up today.

Now on eBay. http://www.ebay.com.au/itm/260854958743?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_500wt_1156 http://www.ebay.com.au/itm/260854954270?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_500wt_1156

Hey was wondering if you still had the dash surrounding for the CD player and clock, will come pick it up in melb

Have found a plug now. Thanks..

Hi, I recently upgraded my radiator and installed some thermo fans, which involved removing the stock plastic fan and viscous clutch. Both are for sale. The fan has some cracks through it, but It was still doing an okay job as of yesterday, although I would recommend getting another fan to put on it. I'm chasing $50 for it and you can have the fan, although the fan is pretty worn. Was taken out of my RB25DET auto transmission with 220,000kms Also for sale is a 180sx turbo, CAM angle sensor, was taking off a black 180sx at the Springvale wreckers two days ago. As I was taking it off the car with the yard closing within minutes, I didn't notice it had a different type of plug compared to my Skyline. I did notice the car had 154,000kms if that helps anyone. Will sell that for $60. (Give or take a few dollars of what I actually paid two days ago.) Feel free to offer on either. I really would like the money to pay for my Road Worthy, I'm located in Melbourne S.E Suburbs. Contact me through a PM or email chris_5haw@hotmail.com for some pictures or further information. Thanks.

Hi, I am looking for the plug with wiring that connects to the O2 sensor in an RB25DET. I'm after the plug that plugs into the one already on the O2 sensor, not from the O2 sensor. I think it may be apart of the engine loom. I'm located in Melbourne S.E Suburbs. Willing to pay $25 for the plug as I need it urgently. PM me on here or email chris_5haw@hotmail.com Thanks.

Been really busy lately, seats are still for sale. PM me for some detailed pictures.

Hi there, I have chased down the problem to be a dodgy O2 sensor. The main problem is that the car runs rich, blows a lot of black smoke & drinks more fuel than should. Also for the road worthy it had surges/flat spots between 3,000-4,000rpm. Which were fixed with the new O2 sensor. Basically I wanted it for a road worthy to remove the flat spots as I thought it would make the car drive a little more "normally" with the mods done to it, but as said, the O2 sensor did the trick. I'm still chasing an Air Flow Controller, but I'm battling through the Road Worthy and an oil leak before I'll have the money to buy one. So thanks to everyone who PM'd me. I'll be in touch once I have everything sorted.

For sale are Front and Rear seats off a R33 GTS-T Series 1. Rear seats are in great condition with no rips or tears. Just need a good clean. $40 Driver side seat has a rip/hole in the lower part of the seat where the seat belt rubbed against it. Passenger seat is in great condition asides from the pocket on the back of seat is torn down one side, could sew back up easily. $60 for the front seats, come complete with the rails attached to bolt into your R33. Just needs the bolts. Pictures will be coming soon. I'm open to any reasonable offer, although the prices are pretty low to start with. I'm located in Melbourne S.E Suburbs, Burwood 3125. PM me on here, or email: chris_5haw@hotmail.com

Hi, I'm looking for an Apexi Air Flow Converter, to suit a R33 Skyline RB25DET. I hear the SAFC II or NEO is what I should be looking for, correct me if I'm wrong though. New or used, as long as it works and has the wiring to splice into the ECU. Basically I'm looking for anything $300-400 or under that will allow me to adjust the AIR/FUEL ratio as my Skyline is running rich and has some flat spots in the engine between 3,000-4,000rpm and sometimes 5,000-6,000rpm. This will be a temp fix to obtain a road worthy until I can afford a replacement ECU. I'm located in Melbourne S.E Suburbs. Send me a PM or email chris_5haw@hotmail.com