PSIKO

Hi guys I am putting a set of HPI dumps onto my RB26 (76.3mm outlet from memory) and have a Tomei Ti exhaust (90mm) from the cat back. I'm trying to find a suitable set of front pipes that will match those sizes, and the only ones I can find are: Pentroof: http://www.nengun.com/pentroof/large-diameter-front-pipe Midori: http://www.nengun.com/midori-seibi/titanium-gtr-front-pipe The thing is, I would prefer tuned length if at all possible - are these tuned length? If not, is there anything else that would be suitable that is tuned length and matches my 76.3mm dumps and 90mm exhaust? Cheers!

Great work Jez, the final product looks amazing mate!

Great looking car Kyle, congrats!

Hi all, As per topic, am chasing a CAS off an R34 Neo engine, shoot me a PM if you have one in good working order, Cheers,

Hi all, Am looking into upgrading the radiator to a 50mm Trust unit, however I currently run the original air snorkel intake. Does anyone know if the original intake can be used with this radiator? Also, will the original fan shroud work on the radiator? Many thanks

Wild stab, but I'm going to say he's in WA Try Per4manz, I think there's a bloke there that does auto electrician stuff and is apparently good

Thanks everyone for the input, will go ahead as planned! And thanks Luke, didn't realise that was a breather but I guess it is then 'sealed' as the bottom is connected to my car

Thanks for the replies everyone. I'm not quite sure, I'll have to contact the people who originally made it and ask them as I can't visually inspect inside it. So I can keep the other port on the rocker cover intake side blocked off? And that line from the intake manifold is fine going to the ECU and not connected somehow to the other vacuum lines? Just concerned that I need to connect in the PCV valve to the system, that's all. Many thanks again!

Hi guys, I've had a read of quite a bit of the catch can setups, however it has honestly left me a bit confused so I just wanted to clarify before I went ahead. Can you please let me know if the following set up for the catch can is effective from the pics below? Notes: Original - 1: this is how it is currently without the catch can in place. The green dot means it is blocked off there. The intake manifold has instead been linked to the ViPec ecu. The green loop means it is connected between rocker covers The green snake to the right is exhaust side connected to the intake Original - 2: this is what the planned hosing will look like. Modified hoses are in blue, green means they're the same as before. The exhaust side has been re-routed to the catch can The other port on the catch can has then been routed to the intake. Cheers all

Only GTT ones were available from the GB, therefore still looking for a set

Awesome, will do - cheers Damien!

As per title, currently chasing bonnet dampers for R34 GTR, Please send me a PM if you have a set; I'm located in Perth, WA Cheers

PM sent

Yep that's right - driver and passenger seats, $50 for both

If you are able to take it to someone, perhaps give Josh at Galvsport a call to see if he has time to look over it In my experience he definitely knows what he's looking at with regards to GTRs, also chances are he might've come across the car before too

Oh, from the above comment - yours isn't a gun-metal grey R34 is it?

http://www.skylinesaustralia.com/forums/topic/436199-rebuilt-resprayed-r34-gtr-brembos-with-project-mu-club-racer-pads/ <-- in WA as well

Hi guys, am selling the following items; feel free to shoot me a message if you're after any of them or pics for anything. Items are located in Claremont. R32 ABS unit - $50 wiper bottle - $50 front pipe - $50 R34 rear bar (black) - $100 rear tail lights + housing (black) - $100 GT dash (the type that doesn't have a hole for triple gauges; doesn't come with airbag) - $50 Seats + rails - $50 Steering wheel - $50 Front door cards - $50 Misc Works water temp sensor housing (goes into the top rad pipe) - $30 R34 GTR bonnet (black) - $1000

Ouch, just read this, sorry to hear about it Hanaldo, I think GPS is probably on my to-do list now, what with all these car (Skyline) thefts lately

Very tidy car, the red is very striking! No offence though, but shouldn't this be in photography section?

You have PM Anthony

Hi all, I'm chasing the brackets (each side) which attach the tops of the fenders to the chassis (inside the engine bay). Please see attachment for the riser/spacer I'm referring to, Cheers

Hi Vince, all parts are in Claremont however the rear bar is in Jandakot. I can bring it up to Perth/Claremont if it makes it easier for you, let me know, Cheers

Hey Vince, please see links below of it still attached to car prior to removal, still in same condition Note that it's for the bar itself, not the rear lights Cheers http://i991.photobucket.com/albums/af34/Godsillah/DSC00529_zps7effde00.jpg http://i991.photobucket.com/albums/af34/Godsillah/DSC00531_zpsff135931.jpg http://i991.photobucket.com/albums/af34/Godsillah/DSC00534_zpsca73d6f8.jpg

It's just the wiper bottle by itself, plus grommet seals and top cap Update: Wheels have been sold Cheers