monts

Sorry to revive all thread but did you manage to do the swap?

Hi guys and girls, I have a very unique r32 coupe for sale. Custom wide body kit, Custom fluted front guards (steel not fibreglass), Wide Rear Quarters. Vented bonnet, Skirts, Rear Bar & Front Bar, Sunroof, Ganador Mirrors, Clear blinkers. HID headlights. Big money has been spent on bodywork. Car is straight as with no scratches. Paint is very smooth Body work has been done to a very high standard. Door jams and boot sprayed. Photos do not do the colour justice, it has another dimension when seen in the flesh. Clean interior, complete and good condition. Car is all original structurally and has never been in an accident. This is the perfect base for a big engine setup or even a P platers dream. A mechanical blank canvas. Comes with r32 gearbox,diff etc. Motor has been removed. Basically Chuck in a motor, loom and ecu to suit and you have your self a one of a kind r32 built to suit your needs. Also comes with -Adjustable coilovers -R32 gtr front calipers -3.5 inch exhaust (cat back) -Front mount intercooler and piping with BOV hidden behind bar -Exedy heavy duty clutch -Modified Radiator with dual 12 inch fans Located Western Sydney. Asking $7000 please call or text me on 0410616101

hey mate, ill get some shortly uploaded. If you like sms me on 0410616101 and ill send some via sms.

sold please delete

sorry about that $2300 and western sydney

hi guys and girls i have a highmount setup to suit rb engines. This is a complete kit pulled out of freshly built motor. Was basically run in and never made it to power tune by the previous owner of the vechile. I wish to go in a different direction. this is a direct bolt in kit with just about everything you will need hot side wise kit includes - gt3572rl ball bearing original garrett turbo. .82 rear t3. Feels to be some normal shaft play. There are some small superficial chips on the blades. I dont think it will effect operation much however if you feel its an issue i got quoted 300 for a brand new comp wheel or 450 to upgrade it to a gtx billet wheel for that extra spool action ? - high mount manifold with a 45mm gate port -45mm turbosmart hypergate -braided oil line and also water lines included. Basically all lines and high quality fittings included. oil drain line will need a new section of hose which is about 20cm. -custom made dump pipe 4 bolt flange plumb back gate. can be easily modified for screamer if your that way inclined. high flow cat and 2 bolt flange l on at exhaust end -intake pipe and filter kit has been removed and ready for collection. any questions please call or text 0410616101 rb25det rb30 rb2530 rb2630 rb26 skyline gtst gtt

http://www.sau.com.au/forums/topic/390549-plazmaman-plenum-on-rb25det-neo/ have a read of that....it might be possible

aac valve is included and can be wired in apparantly. neo throttle body wont fit if you can run a s2 one?

Im not sure are neo bottom runners same as non neo?

its non neo. ive decided to go neo thats the only reason im selling

Hey Mate, I could be willing to separate the kit and remove the cooler from it. I can do it for 550 minus cooler. I will keep the rest of the kit intact as the pipes are specifically made to suit and accelerator cable is needed etc

haha woops ill fix that

Hi Guys and girls, I have a rb25det forward facing plenum kit for sale. I have purchased it and have since gone a different direction in my build. Kit conisits of - Custom made aluminium plenum. Very well crafted retains factory throttle body and iac valve. Similar to plazmaman style where it a bolt on top section only. This is beneficial over some other styles like greddy which use smaller runners and can cause decreased low down and midrange response. I have recently got the plenum sand blasted to be powdercoated. So it is in a blast finish which sort of looks factory (was previously polished in some of the fitted shots). One thing to note in the blasting process a little bit of pitting has happened near a weld. I dont think it would effect performance however if extremely fussy this can be welded up for next to nothing from an exhaust or radiator shop. -Hybrid intercooler - Good functional condition. Could do with a polish if you want to run that way however I was going to paint black. -Piping to suit cold side of intercooler to plenum - welded aluminium with decent size wall -bov - turbosmart and welded on adapted which sits behind the bumper for extra stealthness -hose fittings and clamps - bolts - throttle body and iac valve. - Custom made accelerator cable to suit The only thing left will be new gaskets and chuck it on. I have the gaskets i removed and they look in ok condition so they may even be able to be reused if your on a tight budget. The plenum sits nicely in the bay and has all appropriate vaccum line ports tapped into the bottom for clean install. Pickup or Postage Australia wide for $40 due to the size of box ill need to put it in. Thanks for looking. Asking $650 0410616101

Yeah mate, caps are sold individually.

wheels sold.....caps still available

Looks nice man. Good job

Hey mate. Prefer to sell locally but if you want to organise courier I can pack them on a pallet.

Hi guys and girls, So as the title states i have 2 sets of LMGT2 wheels. These are a quality 2 piece wheel made in japan. Old school JDM style timeless and looks good on a range of nissan models with 5x114.3 stud pattern. Each set of rims are a staggered set specs of 17x8 +35 17x9 +38 They are in reasonable to good condition (not mint) however they will be very easily cleaned up due to their 2 piece construction. I have been quoted $75 a rim for powdercoating. All wheels have decent tread on the rubber. I can sell as a single set or do a deal for both I was planning to use both sets to make a more aggressive fitment by using the front centres on the rear dishes. I have test fitted them in this configuration and looks to fit nicely with more stance. If both sets are wanted we can work out a deal. (i have photos of this which i can show you) I have 7 center caps in total. However 4 are reserved to go with 1 set the remaining 3 I will sell individually to those missing caps Located in western sydney. Please call or sms 0410616101 After 700 for the silver set After 800 for the black set (includes centre caps) Thanks for looking

Hey mate check this one a mate of mine is selling, definitely worth looking at! Very clean. http://www.gumtree.com.au/s-ad/horsley-park/cars-vans-utes/nissan-skyline-r33-gtr-series-3/1055401982

Thanks heaps guys, i only got one key with the car and was a bit worried about getting another one. Ill check it out and speak to nissan! thanks again so much for your help!

Hey guys I'm just wondering if anyone could help. I need to organise an additional remote for a 05 pnm35 stagea. I don't have the fcc id number on mine. Just wondering if anyone could share the number so I can find a replacement key from the net. Also has anyone had one of these things programmed? And where its the one that kinda looks like this http://www.automotiveworld.com/wp-content/uploads/2013/03/Nissan-smart-key-386x170.jpg Thanks in advance

Hey mate sent pm. Please reply

Hey mate sent pm. Please reply